MindMiner 2.88
* New profit acounting on yiimp like pools.
* Disabled some algo in alexis, cool, tpruvot & klaust miners.
Topic: MindMiner v6.21 - miner manager program with online monitoring - page 16. (Read 31648 times)
August 09, 2018, 08:12:55 AM
August 06, 2018, 04:26:36 PM
Are you sure there's nothing wrong with profit calculation on ZergPool?
https://image.prntscr.com/image/H3B5tabDSYu5pLCyZYBP1Q.png
Average profit for X16s hasn't been below 0,010 mBTC/MH/day at any time during the past 24 hours and still MindMiner only calculates with 0,07067 mBTC/MH/day.
I mean I get that you want that the miner always shows less than the true earnings but this miscalculation causes the miner to earn much less than it could because it won't switch to the most profitable coins.
https://image.prntscr.com/image/H3B5tabDSYu5pLCyZYBP1Q.png
Average profit for X16s hasn't been below 0,010 mBTC/MH/day at any time during the past 24 hours and still MindMiner only calculates with 0,07067 mBTC/MH/day.
I mean I get that you want that the miner always shows less than the true earnings but this miscalculation causes the miner to earn much less than it could because it won't switch to the most profitable coins.
August 06, 2018, 09:06:07 AM
MindMiner 2.85
* Updated ccminer enemy to version 1.15.
* Disabled phi2 in ccminer t-rex 0.5.7 (invalid share - disable or remove trex config).
* Updated ccminer enemy to version 1.15.
* Disabled phi2 in ccminer t-rex 0.5.7 (invalid share - disable or remove trex config).
August 06, 2018, 01:59:37 AM
MindMiner 2.84
* Fixed cuballon cuda_treads arg (remove old config for create new default).
* Updated cryptodredge miner to version 0.8.2.
* Added support equihash144 on zergpool (remove old ewbf-05.config.txt for create new default).
* Fixed cuballon cuda_treads arg (remove old config for create new default).
* Updated cryptodredge miner to version 0.8.2.
* Added support equihash144 on zergpool (remove old ewbf-05.config.txt for create new default).
August 06, 2018, 01:49:11 AM
Liking the miner so far. It's really robust and error proof compared to most other cmd multiminers.
Any chance of you adding an idle trigger / idle mining mode, so the miner would automatically pause when the computer is in use and then resume mining when idle?
By the way, it seems that even fast switching mode for ZergPool adjust very slow to profitability changes. Mindminers estimate is often much lower than even the lowest profitability for the past 2 hours in the pool.
Thanks.Any chance of you adding an idle trigger / idle mining mode, so the miner would automatically pause when the computer is in use and then resume mining when idle?
By the way, it seems that even fast switching mode for ZergPool adjust very slow to profitability changes. Mindminers estimate is often much lower than even the lowest profitability for the past 2 hours in the pool.
Idle and user activity very loose concept. No, i have more needed tasks to implement.
It is better to show less but get more than the opposite.
August 06, 2018, 01:44:31 AM
Code:
Pool Enabled Answer ago Average Profit
---- ------- ---------- --------------
AhashPool False Unknown 1 hour
BlazePool False Unknown 1 hour
BlockMasters False Unknown 1 hour
HashRefinery False Unknown 1 hour
MPH False Unknown 1 hour
NiceHash False Unknown 20 min
ZergPool True 00:01:18 1 hour
ZPool True 00:00:00 1 hour
That doesn't say much though. I might have exaggerated in how long it takes (it does feel like longer though), but with those two pools enabled it takes almost two minutes longer to complete. Without those two enabled it only takes a few seconds.
Edit: Zergpool seems to have started working, but ZPool still doesn't.
Code:
Pool Enabled Answer ago Average Profit
---- ------- ---------- --------------
AhashPool False Unknown 1 hour
BlazePool False Unknown 20 min
BlockMasters False Unknown 1 hour
HashRefinery False Unknown 1 hour
MPH True 00:00:24 1 hour
NiceHash True 00:00:23 20 min
ZergPool True 00:00:06 45 min
ZPool True 00:00:00 45 min
I have: Zpool answer six seconds (6 - 0). Zerg: 17 secs (23-6)
August 06, 2018, 01:40:03 AM
Quake4, is there a way to reduce the amount of CPU mining or threads, as i would like to CPU mine, however it utilises too much of the CPU and slows everything down.
By default all cpuminers run in lowest priority "--cpu-priority 0".You can use "extraargs" params to change count of threads "-t X" for each miner.
August 04, 2018, 05:15:25 PM
Hi Quake,
Liking the miner so far. It's really robust and error proof compared to most other cmd multiminers.
Any chance of you adding an idle trigger / idle mining mode, so the miner would automatically pause when the computer is in use and then resume mining when idle?
By the way, it seems that even fast switching mode for ZergPool adjust very slow to profitability changes. Mindminers estimate is often much lower than even the lowest profitability for the past 2 hours in the pool.
Liking the miner so far. It's really robust and error proof compared to most other cmd multiminers.
Any chance of you adding an idle trigger / idle mining mode, so the miner would automatically pause when the computer is in use and then resume mining when idle?
By the way, it seems that even fast switching mode for ZergPool adjust very slow to profitability changes. Mindminers estimate is often much lower than even the lowest profitability for the past 2 hours in the pool.
August 04, 2018, 07:03:01 AM
Quake4, is there a way to reduce the amount of CPU mining or threads, as i would like to CPU mine, however it utilises too much of the CPU and slows everything down.
August 03, 2018, 12:58:55 PM
Enable zpool & zerg. Press key V for Full. And copy past "pools info".
Is this what you mean?Code:
Pool Enabled Answer ago Average Profit
---- ------- ---------- --------------
AhashPool False Unknown 1 hour
BlazePool False Unknown 1 hour
BlockMasters False Unknown 1 hour
HashRefinery False Unknown 1 hour
MPH False Unknown 1 hour
NiceHash False Unknown 20 min
ZergPool True 00:01:18 1 hour
ZPool True 00:00:00 1 hour
That doesn't say much though. I might have exaggerated in how long it takes (it does feel like longer though), but with those two pools enabled it takes almost two minutes longer to complete. Without those two enabled it only takes a few seconds.
Edit: Zergpool seems to have started working, but ZPool still doesn't.
August 03, 2018, 12:36:46 PM
MindMiner 2.83
* Updated ccminer enemy to version 1.14.
* Changed BlockMasters support to common api.
* Reenabled BTG on MPH.
* Updated ccminer enemy to version 1.14.
* Changed BlockMasters support to common api.
* Reenabled BTG on MPH.
August 03, 2018, 08:19:46 AM
Yes, those links works when I use a browser. I know that means that the API's work properly, but unfortunately that doesn't help anything since MindMiner doesn't work with them for me.
Enable zpool & zerg. Press key V for Full. And copy past "pools info". August 03, 2018, 06:48:30 AM
https://www.zpool.ca/api/status
https://www.zpool.ca/api/currencies
Woking normal
https://api.zergpool.com/api/status
https://api.zergpool.com/api/currencies
Woking normal
If zpool & zerg pool isnt answer too: how many machines are sending requests to APIs in these pools?
Yes, those links works when I use a browser. I know that means that the API's work properly, but unfortunately that doesn't help anything since MindMiner doesn't work with them for me.https://www.zpool.ca/api/currencies
Woking normal
https://api.zergpool.com/api/status
https://api.zergpool.com/api/currencies
Woking normal
If zpool & zerg pool isnt answer too: how many machines are sending requests to APIs in these pools?
I have 0 rigs that send or request API to those pools. I have disabled them on all rigs since they doesn't work. When I've been trying to use those pools, I've been trying with one rig at a time.
August 03, 2018, 06:36:03 AM
Thanks, tried a few more times but not much luck on one of the rigs. Will try it on the other one later.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0
The first three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.
Thanks for all the updates and latest miners.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0
The first three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.
Thanks for all the updates and latest miners.
Try: PL 85, Core -100, Mem 0
Disable in algorithms.txt: "DisabledAlgorithms": [ "Phi2" ]
Thanks, disabled it on one rig, and the latest t-rex 057 benchmarked complete on the other rig with my standard overclock settings.
August 03, 2018, 05:36:45 AM
I still can't use Block Masters, Hash Refinery, Zerg Pool or Zpool. If any of those are enabled, MindMiner close to freezes. I don't know the specifics behind what is happening, but in practice, what is happening is that MindMiner gets stuck at "Pool(s) request ..." for a long long time (we're talking several minutes per pool!). This messes everything up, from benchmarks which takes an extremely long time, to just simple mining.
Basically, with any of the above mentioned pools enabled, MindMiner simply doesn't work.
I should mention that I've tried using both "Europe" and "Usa" as region in the config, but neither did help. Also tried it from three different locations on 7 different rigs - they all have the exact same issue.
Europe or Usa - this stratum onptions, dont effect to api request (pool requests).Basically, with any of the above mentioned pools enabled, MindMiner simply doesn't work.
I should mention that I've tried using both "Europe" and "Usa" as region in the config, but neither did help. Also tried it from three different locations on 7 different rigs - they all have the exact same issue.
check each address in browser. open and press F5 after 5 sec and account how much answer with api content and no answer
http://blockmasters.co/api/status (woking normal)
http://blockmasters.co/api/currencies (not working)
not working - disable it
Api on block master not working one week. They, its ignore in discord.
http://pool.hashrefinery.com/api/status
http://pool.hashrefinery.com/api/currencies
Working normal - but have too small miners - disable it
https://www.zpool.ca/api/status
https://www.zpool.ca/api/currencies
Woking normal
https://api.zergpool.com/api/status
https://api.zergpool.com/api/currencies
Woking normal
If zpool & zerg pool isnt answer too: how many machines are sending requests to APIs in these pools?
August 03, 2018, 03:25:16 AM
I still can't use Block Masters, Hash Refinery, Zerg Pool or Zpool. If any of those are enabled, MindMiner close to freezes. I don't know the specifics behind what is happening, but in practice, what is happening is that MindMiner gets stuck at "Pool(s) request ..." for a long long time (we're talking several minutes per pool!). This messes everything up, from benchmarks which takes an extremely long time, to just simple mining.
Basically, with any of the above mentioned pools enabled, MindMiner simply doesn't work.
I should mention that I've tried using both "Europe" and "Usa" as region in the config, but neither did help. Also tried it from three different locations on 7 different rigs - they all have the exact same issue.
Basically, with any of the above mentioned pools enabled, MindMiner simply doesn't work.
I should mention that I've tried using both "Europe" and "Usa" as region in the config, but neither did help. Also tried it from three different locations on 7 different rigs - they all have the exact same issue.
August 02, 2018, 02:03:53 AM
MindMiner 2.82
* Updated ewbf miner to version 0.5.
* Changed switching mode hotkey combination to Ctrl|Alt+S.
* Fixed clean miners & typo.
* Updated t-rex miner to version 0.5.7.
* Updated ewbf miner to version 0.5.
* Changed switching mode hotkey combination to Ctrl|Alt+S.
* Fixed clean miners & typo.
* Updated t-rex miner to version 0.5.7.
August 01, 2018, 09:01:57 AM
MindMiner 2.81
* Added fast (hype) switching mode. It isn't use "AverageProfit". For control is use the "SwitchingResistance" + "Switching": "Fast" in main config.
* Fixed xsg coin mapping.
* Added fast (hype) switching mode. It isn't use "AverageProfit". For control is use the "SwitchingResistance" + "Switching": "Fast" in main config.
* Fixed xsg coin mapping.
August 01, 2018, 05:04:30 AM
Thanks, tried a few more times but not much luck on one of the rigs. Will try it on the other one later.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0
The first three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.
Thanks for all the updates and latest miners.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0
The first three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.
Thanks for all the updates and latest miners.
Try: PL 85, Core -100, Mem 0
Disable in algorithms.txt: "DisabledAlgorithms": [ "Phi2" ]
August 01, 2018, 04:20:18 AM
Thanks, tried a few more times but not much luck on one of the rigs. Will try it on the other one later.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0
The first three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.
Thanks for all the updates and latest miners.
PL 65, Core +100, Mem 0
PL 65, Core 0, Mem 0
PL 85, Core +100, Mem 0
PL 85, Core 0, Mem 0
The first three settings crashed as soon as it start, and the last setting the benchmark was almost complete, however it crashed also.
I will skip this algo for mining.
Thanks for all the updates and latest miners.
Jump to: