Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 136. (Read 850409 times)
July 16, 2014, 12:26:43 PM
Does MinerA now support Rockminer devices for the mining of BitCoin? Specifically interested in the RK-BOX as MinerA is by far in my opinion the best controller software out there. Thanks in advance!
July 16, 2014, 12:17:42 PM
there is only 2 pools on the miner yours and my own pool server
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
Are you sure my pool is below yours in the settings? Can you save the settings once?
Hi
here you go
I mean the settings page, not the pool details table.
Let me explain, the pool details table is build over the current miner stats, so for example if you switch a pool by selecting it in the pool details table you are switching it only for that session. This means that action won't save your current pool settings, and if the pool settings (settings page) are different, you'll get those ones the next reboot/restart.
So please, check the settings page, check you have my pool below yours and save once (in any case).
Ok cool I understand now
your pool was at the top of the list
now that i have moved down its ok now.
Thanks very much for the help your a star
i will send somt BTC your way
thanks
Paul
July 16, 2014, 11:22:29 AM
there is only 2 pools on the miner yours and my own pool server
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
Are you sure my pool is below yours in the settings? Can you save the settings once?
Hi
here you go
I mean the settings page, not the pool details table.
Let me explain, the pool details table is build over the current miner stats, so for example if you switch a pool by selecting it in the pool details table you are switching it only for that session. This means that action won't save your current pool settings, and if the pool settings (settings page) are different, you'll get those ones the next reboot/restart.
So please, check the settings page, check you have my pool below yours and save once (in any case).
July 16, 2014, 11:01:01 AM
there is only 2 pools on the miner yours and my own pool server
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
Are you sure my pool is below yours in the settings? Can you save the settings once?
Hi
here you go
July 16, 2014, 10:43:27 AM
there is only 2 pools on the miner yours and my own pool server
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
Are you sure my pool is below yours in the settings? Can you save the settings once?
July 16, 2014, 10:25:46 AM
Hi
i have been using this for a few days and it rocks BUT
when the Pi Reboots WHY dose it not go back to mining the pool it was on
it always mines back on your pool !!!!!!!
3 hours of mining lost today because of this
I don't mind you having there but come on this is not right.
i have been using this for a few days and it rocks BUT
when the Pi Reboots WHY dose it not go back to mining the pool it was on
it always mines back on your pool !!!!!!!
3 hours of mining lost today because of this
I don't mind you having there but come on this is not right.
At least give me some info, get the list of the pools from the miner settings page (scroll down blue box) and let me see, it's really weird and of course it's not wanted.
there is only 2 pools on the miner yours and my own pool server
if i power of the ras pi when it powers back up it switches back to your pool
I'm running 0.3.1
thanks
Paul
July 16, 2014, 10:11:02 AM
took few tries 2 updates 2 reboots and finally a setting change and restart for it to fully update to the latest version but now I have all 3 of mine on the latest edition running great as usual. Thank you !!!
What command do you use to restart your pi? I have tried "sudo init 6", "sudo coldreboot", "sudo sync && coldreboot" and all of them seem to hang the pi. "sudo reboot" works for me.
Yup.
sudo reboot to reboot.
sudo poweroff to poweroff.
July 16, 2014, 09:56:15 AM
Is there a way to reset the stats? I wanted to "zero out" the graphs in between various test runs I'm doing using minera.
well, if you mean the charts, you can reset them with these commands:
Code:
redis-cli del minerd_delta_stats
redis-cli del minerd_totals_stats
redis-cli del minerd_avg_stats_86400
redis-cli del minerd_avg_stats_3600
redis-cli del minerd_avg_stats_300
redis-cli del minerd_stats
redis-cli del minerd_totals_stats
redis-cli del minerd_avg_stats_86400
redis-cli del minerd_avg_stats_3600
redis-cli del minerd_avg_stats_300
redis-cli del minerd_stats
July 16, 2014, 09:51:55 AM
Is there a way to reset the stats? I wanted to "zero out" the graphs in between various test runs I'm doing using minera.
July 16, 2014, 09:48:36 AM
Hi
i have been using this for a few days and it rocks BUT
when the Pi Reboots WHY dose it not go back to mining the pool it was on
it always mines back on your pool !!!!!!!
3 hours of mining lost today because of this
I don't mind you having there but come on this is not right.
i have been using this for a few days and it rocks BUT
when the Pi Reboots WHY dose it not go back to mining the pool it was on
it always mines back on your pool !!!!!!!
3 hours of mining lost today because of this
I don't mind you having there but come on this is not right.
At least give me some info, get the list of the pools from the miner settings page (scroll down blue box) and let me see, it's really weird and of course it's not wanted.
July 16, 2014, 09:22:23 AM
Hi
i have been using this for a few days and it rocks BUT
when the Pi Reboots WHY dose it not go back to mining the pool it was on
it always mines back on your pool !!!!!!!
3 hours of mining lost today because of this
I don't mind you having there but come on this is not right.
i have been using this for a few days and it rocks BUT
when the Pi Reboots WHY dose it not go back to mining the pool it was on
it always mines back on your pool !!!!!!!
3 hours of mining lost today because of this
I don't mind you having there but come on this is not right.
July 16, 2014, 09:00:22 AM
Would we be able to run Fury's and Seeds on 1 instance of Minera\CG\BFg?
I have 14 Fury's and it doesn't seem to like that many. My other Pi has 2 Seeds. So I want to balance it out.
Also I can't get CGMiner Dmaxl fork to work at all, never starts
Using combinations of these extra settings
--scrypt --zeus-chips 6 --zeus-clock 328 --scan-serial zeus:auto --nocheck-golden (Golden I need for my older Furys. On BFG I couldn't get all of them to get accepts unless I did)
I have 14 Fury's and it doesn't seem to like that many. My other Pi has 2 Seeds. So I want to balance it out.
Also I can't get CGMiner Dmaxl fork to work at all, never starts
Using combinations of these extra settings
--scrypt --zeus-chips 6 --zeus-clock 328 --scan-serial zeus:auto --nocheck-golden (Golden I need for my older Furys. On BFG I couldn't get all of them to get accepts unless I did)
It's kinda finicky, might need to reboot from the GUI a few times :/.
All you need is the scrypt box checked. It should run.
If you decide to overclock them, you need --zeus-clock 340 in the extra cmd field.
July 16, 2014, 01:42:38 AM
Hey there. Love Minera so far. Not a problem per se with Minera but I wanted to reach out to those who may be running gridseeds and furies with Minera.
What miner software are you using and are you doing any manual settings for either one/both? I assume that the manual config on the Settings page passes to the miner. I'm trying out the cgdmaxizeus miner at the moment but getting consistent 50-60% error rate and the Gridseed will only do max 250 kh/s. All miners are brand new and work independently of each other at advertised speeds.BGminer works fine for the Fury but no Gridseed. BFGminer works fine with Gridseed, excuse me.
I passed --zeus-clock 328 to cgdmaxizeus, restarted & now my error rates are 5-7%, rejected 6%. I would say that's much better. Still curious at any optimizations that could be done and the Gridseed still maxes at same 250 kh/s.
Any help would be appreciated.
What miner software are you using and are you doing any manual settings for either one/both? I assume that the manual config on the Settings page passes to the miner. I'm trying out the cgdmaxizeus miner at the moment but getting consistent 50-60% error rate and the Gridseed will only do max 250 kh/s. All miners are brand new and work independently of each other at advertised speeds.
I passed --zeus-clock 328 to cgdmaxizeus, restarted & now my error rates are 5-7%, rejected 6%. I would say that's much better. Still curious at any optimizations that could be done and the Gridseed still maxes at same 250 kh/s.
Any help would be appreciated.
I just started using Minera today myself and I am not the most experienced with mining, but I am getting much better results it seems. I am using the CPUMiner and allowing the auto tune to do it's thing. Have not been running long enough to see where that will stabilize at but I would say 90 out of my GridSeeds are running above 350 kh/s, with the other 10 hovering around 300 or so.
This version of CPUMiner in Minera appears to have been specifically tweaked for use with GridSeeds. If this auto tune works as it appears to, REALLY cool!!
July 15, 2014, 11:40:00 PM
very impressive updates, now i will jump ship from minepeon
i sent some ltc your way its not much but its somthing
tx 7f86774ecc67a581e7e1f418ab460f2e498fe4318d6ee1ce280485befd8069c5
i sent some ltc your way its not much but its somthing
tx 7f86774ecc67a581e7e1f418ab460f2e498fe4318d6ee1ce280485befd8069c5
July 15, 2014, 11:15:34 PM
took few tries 2 updates 2 reboots and finally a setting change and restart for it to fully update to the latest version but now I have all 3 of mine on the latest edition running great as usual. Thank you !!!
What command do you use to restart your pi? I have tried "sudo init 6", "sudo coldreboot", "sudo sync && coldreboot" and all of them seem to hang the pi. "sudo reboot" works for me.
July 15, 2014, 11:14:05 PM
took few tries 2 updates 2 reboots and finally a setting change and restart for it to fully update to the latest version but now I have all 3 of mine on the latest edition running great as usual. Thank you !!!
What command do you use to restart your pi? I have tried "sudo init 6", "sudo coldreboot", "sudo sync && coldreboot" and all of them seem to hang the pi. "sudo reboot" works for me.
July 15, 2014, 11:13:27 PM
took few tries 2 updates 2 reboots and finally a setting change and restart for it to fully update to the latest version but now I have all 3 of mine on the latest edition running great as usual. Thank you !!!
What command do you use to restart your pi? I have tried "sudo init 6", "sudo coldreboot", "sudo sync && coldreboot" and all of them seem to hang the pi. July 15, 2014, 10:59:26 PM
Would we be able to run Fury's and Seeds on 1 instance of Minera\CG\BFg?
I have 14 Fury's and it doesn't seem to like that many. My other Pi has 2 Seeds. So I want to balance it out.
Also I can't get CGMiner Dmaxl fork to work at all, never starts
Using combinations of these extra settings
--scrypt --zeus-chips 6 --zeus-clock 328 --scan-serial zeus:auto --nocheck-golden (Golden I need for my older Furys. On BFG I couldn't get all of them to get accepts unless I did)
I have 14 Fury's and it doesn't seem to like that many. My other Pi has 2 Seeds. So I want to balance it out.
Also I can't get CGMiner Dmaxl fork to work at all, never starts
Using combinations of these extra settings
--scrypt --zeus-chips 6 --zeus-clock 328 --scan-serial zeus:auto --nocheck-golden (Golden I need for my older Furys. On BFG I couldn't get all of them to get accepts unless I did)
July 15, 2014, 10:38:55 PM
Hey there. Love Minera so far. Not a problem per se with Minera but I wanted to reach out to those who may be running gridseeds and furies with Minera.
What miner software are you using and are you doing any manual settings for either one/both? I assume that the manual config on the Settings page passes to the miner. I'm trying out the cgdmaxizeus miner at the moment but getting consistent 50-60% error rate and the Gridseed will only do max 250 kh/s. All miners are brand new and work independently of each other at advertised speeds.BGminer works fine for the Fury but no Gridseed. BFGminer works fine with Gridseed, excuse me.
I passed --zeus-clock 328 to cgdmaxizeus, restarted & now my error rates are 5-7%, rejected 6%. I would say that's much better. Still curious at any optimizations that could be done and the Gridseed still maxes at same 250 kh/s.
Any help would be appreciated.
What miner software are you using and are you doing any manual settings for either one/both? I assume that the manual config on the Settings page passes to the miner. I'm trying out the cgdmaxizeus miner at the moment but getting consistent 50-60% error rate and the Gridseed will only do max 250 kh/s. All miners are brand new and work independently of each other at advertised speeds.
I passed --zeus-clock 328 to cgdmaxizeus, restarted & now my error rates are 5-7%, rejected 6%. I would say that's much better. Still curious at any optimizations that could be done and the Gridseed still maxes at same 250 kh/s.
Any help would be appreciated.
July 15, 2014, 09:41:33 PM
Just setting things up, etc....
When trying to use the terminal I get this...
When trying to use the terminal I get this...
I get the same issue what browser are you using? I am using Chrome
Too funny.......look at the picture bro:-) Me thinks he using Firefox.
Jump to: