Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 171. (Read 850502 times)

Quote from: SilentH on May 17, 2014, 05:56:55 PM

Any option to change frequency on each blade or GS individually?

Example:

--gc3355-freq=123456789:888:0,123456789:750:1

will set serialnumber 123456789 to frequency 888 MHz on chip 0 and 750 MHz on chip 1 and so on

You can add this line under extra options in the settings

Confused.

I have 5pcs of the 5 chip infinitys.
Serials are:
6D863F8C5650
6D82366F5650
6D92278D4853
6D7615775650
6D8E07755251

I've run autotune and the freqs that are best for each are:
6D863F8C5650:868
6D82366F5650:863
6D92278D4853:868
6D7615775650:908
6D8E07755251:883

If I run this: --gc3355-freq=6D863F8C5650:868,6D82366F5650:863,6D92278D4853:868,6D7615775650:908,6D8E07755251:883
It defaults to 600 (if Minera is on "default" for --freq)
It defaults to 850 (if Minera is set to 850 for --freq)

If I run this: --gc3355-freq=6D863F8C5650:868:0,6D82366F5650:863:0,6D92278D4853:868:0,6D7615775650:908:0,6D8E07755251:883:0
I get really wacky freqs, as I think I am only setting 1 chip to that freq.

What am I missing? lol, it is probably something insanely simple.

If I run this: --gc3355-freq=6D863F8C5650:868:0,6D82366F5650:863:0,6D92278D4853:868:0,6D7615775650:908:0,6D8E07755251:883:0 <-- you only set the first chip on each miner. Try this:

--gc3355-freq=6D863F8C5650:868:0,6D863F8C5650:868:1,6D863F8C5650:868:2,6D863F8C5650:868:3,6D863F8C5650:868:4,6D82366F5650:863:0,6D82366F5650:863:1,...,...,etc

Worked!

Thank you!

kaltar

sr. member

Activity: 805

Merit: 250

i just wanted to say OMFG you rock, i tried every rasberry image and Minera is THE BEST.

one quick question, on your rasberry image, ( i know i'm a newb when it comes to linux ) how do i change the
time zone to show the correct time on my minera web page.

thanks

edonkey

legendary

Activity: 1150

Merit: 1004

Hi michelem. Thanks to you and Sandor111 for all the hard work. The combo of Cpuminer and Minera is really shaping up to be the best option for GridSeeds.

How close are you to getting the start/stop daemon working? I'm interested in upgrading, but I'm holding off until this feature is in place.

quakefiend420

legendary

Activity: 784

Merit: 1000

Quote from: LexMine on May 17, 2014, 04:26:32 PM

Quote from: bexwhitt on May 17, 2014, 04:22:15 PM

Having looked at https://github.com/siklon/cpuminer-gc3355 I don't think you can set the frequency's by the serial number but only by the device number ttyACM.. as these move around on reboot it is pretty useless ATM.

You can. Sandor changed this yesterday on his version. You have to update to Minera 0.1.9 to use this feature. I tested it yesterday and it's working.

But remember, you can't set frequencies on a single chip when you're using blades. This works only for grids.

On blades you have to use Serialnumber:Frequency without ChipID.

And remember... blades don't support auto tuning!

This is exactly what I'm doing and everything defaults to 600 once launched

I'm having the same problem. Only way that I can set it is via tty and chipids, so i have 8 settings per blade.

unamis76

legendary

Activity: 1512

Merit: 1012

Guess I finally managed to get this working. Software is nice but a bit temperamental: failover pools have to have stratum before their link, and the protocol-dump option doesn't really work, even if put on the extra options. And I only managed to get it working after a fresh SD format, couldn't get it going installing on top of my raspbian install

SilentH

member

Activity: 65

Merit: 10

Quote from: LexMine on May 17, 2014, 04:26:32 PM

Quote from: bexwhitt on May 17, 2014, 04:22:15 PM

Having looked at https://github.com/siklon/cpuminer-gc3355 I don't think you can set the frequency's by the serial number but only by the device number ttyACM.. as these move around on reboot it is pretty useless ATM.

You can. Sandor changed this yesterday on his version. You have to update to Minera 0.1.9 to use this feature. I tested it yesterday and it's working.

But remember, you can't set frequencies on a single chip when you're using blades. This works only for grids.

On blades you have to use Serialnumber:Frequency without ChipID.

And remember... blades don't support auto tuning!

This is exactly what I'm doing and everything defaults to 600 once launched

LexMine

member

Activity: 84

Merit: 10

Quote from: michelem on May 16, 2014, 03:13:45 AM

PS you can add more languages/keyboards/spellings on iPad/iOS and select the right one while you are typing something

(icon is the world in the bottom left corner http://support.apple.com/kb/HT4509)

Thanks for this Tip. Live can be so easy, when you know how to handle your iPad Grin

LexMine

member

Activity: 84

Merit: 10

Quote from: bexwhitt on May 17, 2014, 04:22:15 PM

Having looked at https://github.com/siklon/cpuminer-gc3355 I don't think you can set the frequency's by the serial number but only by the device number ttyACM.. as these move around on reboot it is pretty useless ATM.

You can. Sandor changed this yesterday on his version. You have to update to Minera 0.1.9 to use this feature. I tested it yesterday and it's working.

But remember, you can't set frequencies on a single chip when you're using blades. This works only for grids.

On blades you have to use Serialnumber:Frequency without ChipID.

And remember... blades don't support auto tuning!

bexwhitt

newbie

Activity: 50

Merit: 0

Having looked at https://github.com/siklon/cpuminer-gc3355 I don't think you can set the frequency's by the serial number but only by the device number ttyACM.. as these move around on reboot it is pretty useless ATM.

LexMine

member

Activity: 84

Merit: 10

Quote from: SilentH on May 17, 2014, 04:10:13 PM

I have the same problem with my blades. no matter what i do other than freq=850, everything defaults to 600. I'm clearly doing something wrong and have just given up trying to set different freq for each blade. Im sure someone has it working but every time i ask for the correct syntax i never get a response.

I've got the same problem on my Laptop, when I'm testing modded grids.
Try raising the Frequency in 50 MHz Steps

SilentH

member

Activity: 65

Merit: 10

Any option to change frequency on each blade or GS individually?

Example:

--gc3355-freq=123456789:888:0,123456789:750:1

will set serialnumber 123456789 to frequency 888 MHz on chip 0 and 750 MHz on chip 1 and so on

You can add this line under extra options in the settings

Confused.

I have 5pcs of the 5 chip infinitys.
Serials are:
6D863F8C5650
6D82366F5650
6D92278D4853
6D7615775650
6D8E07755251

I've run autotune and the freqs that are best for each are:
6D863F8C5650:868
6D82366F5650:863
6D92278D4853:868
6D7615775650:908
6D8E07755251:883

If I run this: --gc3355-freq=6D863F8C5650:868,6D82366F5650:863,6D92278D4853:868,6D7615775650:908,6D8E07755251:883
It defaults to 600 (if Minera is on "default" for --freq)
It defaults to 850 (if Minera is set to 850 for --freq)

If I run this: --gc3355-freq=6D863F8C5650:868:0,6D82366F5650:863:0,6D92278D4853:868:0,6D7615775650:908:0,6D8E07755251:883:0
I get really wacky freqs, as I think I am only setting 1 chip to that freq.

What am I missing? lol, it is probably something insanely simple.

I have the same problem with my blades. no matter what i do other than freq=850, everything defaults to 600. I'm clearly doing something wrong and have just given up trying to set different freq for each blade. Im sure someone has it working but every time i ask for the correct syntax i never get a response.

LexMine

member

Activity: 84

Merit: 10

Quote from: michelem on May 15, 2014, 01:42:13 AM

Any option to change frequency on each blade or GS individually?

Example:

--gc3355-freq=123456789:888:0,123456789:750:1

will set serialnumber 123456789 to frequency 888 MHz on chip 0 and 750 MHz on chip 1 and so on

You can add this line under extra options in the settings

Confused.

I have 5pcs of the 5 chip infinitys.
Serials are:
6D863F8C5650
6D82366F5650
6D92278D4853
6D7615775650
6D8E07755251

I've run autotune and the freqs that are best for each are:
6D863F8C5650:868
6D82366F5650:863
6D92278D4853:868
6D7615775650:908
6D8E07755251:883

If I run this: --gc3355-freq=6D863F8C5650:868,6D82366F5650:863,6D92278D4853:868,6D7615775650:908,6D8E07755251:883
It defaults to 600 (if Minera is on "default" for --freq)
It defaults to 850 (if Minera is set to 850 for --freq)

If I run this: --gc3355-freq=6D863F8C5650:868:0,6D82366F5650:863:0,6D92278D4853:868:0,6D7615775650:908:0,6D8E07755251:883:0
I get really wacky freqs, as I think I am only setting 1 chip to that freq.

What am I missing? lol, it is probably something insanely simple.

Right, you're only setting chip 0

--gc3355-freq=123456789:888:0

means Serialnumber:Frequency:ChipID

You have to set the Frequency for every grid, for every chip (0-4) what means 5 Settings for one grid

--gc3355-freq=123456789:888:0,123456789:888:1,123456789:888:2,123456789:888:3,123456789:888:4

Fizikal

newbie

Activity: 25

Merit: 0

Quote from: Fizikal on May 15, 2014, 12:58:11 AM

Absolutely. I am running Ubuntu 13.10 (GNU/Linux 3.11.0-20-generic x86_64)

Code:

minera@robot:~$ sudo dpkg -l|grep php
ii  php5-cgi                               5.5.3+dfsg-1ubuntu2.3                  amd64        server-side, HTML-embedded scripting language (CGI binary)
ii  php5-cli                               5.5.3+dfsg-1ubuntu2.3                  amd64        command-line interpreter for the php5 scripting language
ii  php5-common                            5.5.3+dfsg-1ubuntu2.3                  amd64        Common files for packages built from the php5 source
ii  php5-json                              1.3.1+dfsg-2                           amd64        JSON module for php5
ii  php5-mysql                             5.5.3+dfsg-1ubuntu2.3                  amd64        MySQL module for php5
ii  php5-readline                          5.5.3+dfsg-1ubuntu2.3                  amd64        Readline module for php5

oh well, this sounds weird, but probably it is an issue with the php version which is different from the Raspbian one. I should do some tests.
Thanks

No worries, Michele. It is fixed, the timezone was simply a permissions issue with Log.php. Make sure php-json gets installed in case people are running Minera on Ubuntu x86_64. After that it was peachy. To note, I haven't plugged in my Blade yet. I wanted to get the setup perfect before I switched them over. I have a second RPi, so I may setup on that and plug them in to that after testing with Ubuntu x86_64 (xubuntu 13.10).

My Xubuntu machine runs bitpay's Insight software to explore the blockchain, also runs ABE too as a backup. It also runs a Coinpunk wallet. Kind of a little all in one with only 2 ports open to the interwebs.

stefna

newbie

Activity: 3

Merit: 0

Hi,

great piece of software! Thank you for your work Michelem,

Did anyone collect experience with how many gridseeds you can run this on a raspberry?

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: scryptminer on May 17, 2014, 12:45:33 PM

Yep testet it and it works fine. After starting it via command-line I can also refresh the GUI and it shows the stats. However the GUI (Start function) does nothing on my end.

Thanks

Can I ask you what kind of Minera installation you did? Image file or manual one? What Minera version do you have and what's the controller? (rpi? ubuntu pc?)
Thanks

tritiated

newbie

Activity: 3

Merit: 0