Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 18. (Read 850495 times)

okay I have a spare rasp pi 3

so is a 16gb card big enough?


can this run  avalon 721's and avalon 741's  and s-9's and gpus  in different ip's

at the moment you are mining  with my cpu in my mac mini





and your website causes huge cpu usage  on a mac.

Are you talking about getminera.com? Let me check.

I just fixed my update to v0.8.1 problem.  For some reason my gridseed black miner stop working after upgrading.....

1) Just SSH into your minera.
2) Delete the minera folder from /var/www
3) CD back to /var/www
4) sudo git clone https://github.com/michelem09/minera
5) sudo ./install_minera.sh ( after adding execute rights to the file)

6) lastly restall the miners software....

cd /var/www/minera
./build_miner.sh [miner-name | or empty for usage]


*** Hope this is helpful to anyone who needs it....

The miner that is running in the background on your website makes my PC so slow I cant navigate the site properly

And now old problems..

Minera kicked out my Miner

No active local devices found
  ZUS0   n.a.   240 MHz   43.25Mh/s   0   0   0.00%   0   0.00%   1   100.00%   0 secs ago
  ZUS1   n.a.   240 MHz   43.11Mh/s   0   0   0.00%   0   0.00%   0   0.00%   0 secs ago


Local Pools details (cgdmaxlzeus)
No active pools data available.

And the Local Accepted/Rejected/Errors
0
1,500
3,000
4,500
6,000

goes bigger and bigger.. Think i have 10 Meters to scroll down... And it goes on and on and on. 

5 Day´s no Hashrate.. not so fine

Same on other pools

How i start the log in realtime ?

here is the raw log

/var/www/minera/minera-bin/cgminer-dmaxl-zeus: /lib/arm-linux-gnueabihf/libtinfo.so.5: no version information available (required by /var/www/minera/minera-bin/cgminer-dmaxl-zeus)
/var/www/minera/minera-bin/cgminer-dmaxl-zeus: /lib/arm-linux-gnueabihf/libncurses.so.5: no version information available (required by /var/www/minera/minera-bin/cgminer-dmaxl-zeus)
 [2017-10-01 12:11:03] Started cgminer 4.3.5-scrypt.2
 [2017-10-01 12:11:03] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2017-10-01 12:11:06] Found Zeus at /dev/ttyUSB0, mark as 0
 [2017-10-01 12:11:08] Found Zeus at /dev/ttyUSB1, mark as 0
 [2017-10-01 12:11:08] ZUS0 opened on /dev/ttyUSB0
 [2017-10-01 12:11:08] ZUS1 opened on /dev/ttyUSB1
 [2017-10-01 12:11:08] Probing for an alive pool
 [2017-10-01 12:11:08] Pool 2 difficulty changed to 2048
 [2017-10-01 12:11:08] Pool 0 difficulty changed to 65536
 [2017-10-01 12:11:08] Network diff set to 400K
 [2017-10-01 12:11:14] API running in IP access mode on port 4028 (15)
 [2017-10-01 12:11:25] Stratum from pool 0 detected new block
 [2017-10-01 12:11:31] Network diff set to 376K
 [2017-10-01 12:11:31] Stratum from pool 0 detected new block
 [2017-10-01 12:11:38] Pool 1 difficulty changed to 65536

Check the miner log, try to change the pool.

So, all done.
Doestn´t know that you mean to update the code in the Minera frontpage under System(open terminal.

So aktually no more loading rings.

But no shares, Just 100% HW errors.

CG miner ( Dmaxl zeus fork )
and BFG Miner

DEV   Temp   Frequency   Dev HR   Shares   AC   % AC   RE   % RE   HW   % HW   Last share   Last share time
  ZUS0   n.a.   240 MHz   42.88Mh/s   0   0   0.00%   0   0.00%   0   0.00%   0 secs ago   Thu, 01 Jan 1970 00:00:00 GMT
  ZUS1   n.a.   240 MHz   66.61Mh/s   0   0   0.00%   0   0.00%   291   100.00%   0 secs ago   Thu, 01 Jan 1970 00:00:00 GMT
  total   n.a.   240MHz   109.48Mh/s   0   0   0.00%   0   0.00%   291   100.00%   0 secs ago   Sun, 01 Oct 2017 09:38:50 GMT

Miners stability isn't related to Minera in any way because Minera acts only as web interface, the mining job is done by the miner software and only Cgminer and Bfgminer were updated since 0.8.0. Cgminerdmaxl and Cpuminer are the same of 0.7.0.

To update the code via WinSCP, you need to open a terminal to your Minera IP and login as user: minera, pass: minera

Then just copy and paste these two lines and hit enter.

cd /var/www/minera
sudo git fetch --all && sudo git reset --hard origin/master

i just install 0.7 i can not even open the terminal anymore

Same here.. But i switch back to 0.7 and have the same problems like 0.8 /0.8.1
And my wife is now a little bit angry becourse the clothes not dry in the Garage

minera 0.7 was stable for me i run it 24/7 without any problem
with minera 0.8 it runs a few hours then it freeze or i get errors.

0.7 is also not stable. Have test it.

And i dont know how do i update the Code


Im with WinSCP in my Raspberry and see the strukture.

root/var/www/minera

but didnt find the

sudo git fetch --all && sudo git reset --hard origin/master


can anyone tell me step by step for dummy´s ?

is there a link for minera 0.7 the new minera is not stable for me.

You are trying to start a miner process with API enabled in the same port another process is running yet.
Stop the other process or change the API port to something like 4029

does some one know what this mean and what i can do about it.
 


[2017-09-30 19:50:11.133] API bind to port 4028 failed - trying again in 30sec
 [2017-09-30 19:50:41.134] API bind to port 4028 failed - trying again in 30sec
 [2017-09-30 19:51:11.135] API bind to port 4028 failed - trying again in 30sec
 [2017-09-30 19:51:22.860] Stratum from pool 0 detected new block at height 487715
 [2017-09-30 19:51:41.135] API bind to port 4028 failed (Address already in use) - API will not be available
 [2017-09-30 20:00:34.131] Stratum from pool 0 detected new block at height 487716
 [2017-09-30 20:15:05.828] Stratum from pool 0 detected new block at height 487717
 [2017-09-30 20:15:05.829] Failed to create restart thread errno=12 in cgminer.c restart_threads():5046

You need to SSH into your Minera, user and pass are "minera"

where i find this to update ?

Raspberry Pi 2 - 0.8.1 Gridseed (5 chip model) with cgdmaxlzeus

Please tell me miner software used