[Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 92.

ntsdm

full member

Activity: 157

Merit: 100

hi everyone,
i know this question has been asked before but is there support and what would i need to do for this to work with a A2 TERMINATOR 86MHs by innosilicon?
please try to give a clear answer understandable by everyone.

Merick

full member

Activity: 129

Merit: 100

Any idea what could cause the Minera UI to suddenly stop loading?

If I SSH into the PI and send a Screen -r command I can see that my miners are working fine, and the pool also confirms this. However when I try to access the UI I get this.

and when I enter in my password and hit ENTER I get this..

I have rebooted the PI and miners with a hard power reset but this is still the result. I suppose I will just re-image the SD card shortly but I figured I would ask on here first.

Thanks in advance.

** Updated **
Never mind, this turned out to be a cached image problem in chrome. I deleted the cache and now everything works fine.

astutiumRob

full member

Activity: 201

Merit: 100

Quote from: Axiste on November 06, 2014, 04:45:03 AM

address: VqSPcvUXVc2tg9sFSKHS8kKGNNZXYTG5sx.2

that .2 on the end makes me think someone has gotten access to your minera, and this is the second machine they have pointed to mining on that address.

means they can keep track of how much they earn of each hacked machine, but still only use a coin address so as to make it harder to track. (ie not a registered user at the site)

I'd hazard a guess that there is some 'backdoor' or default password in minera or something minera is including by default.

Whomever 'VqSPcvUXVc2tg9sFSKHS8kKGNNZXYTG5sx' address belongs to appears to be mining with several machines I was asked to look at this week (and managed to switch the miner and blow up a psu by massive overclocking on one !)

So far I've seen eight different minera users who've been hacked and had mining co-opted to the same address (but different bits-after-the-dot)

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Riley600 on November 29, 2014, 05:37:44 PM

Quote from: nwoolls on November 29, 2014, 03:51:16 AM

Thanks Riley.

The issue I am currently looking to reproduce is the report that ZeusMiner hardware does not work at all. I am leaning towards this being an issue with the default clock being set too high in the driver as discussed in the BFGMiner thread here.

If you are having an issue with hashrate dropping, are you using a multipool? If so this is a known issue with BFGMiner and I'd recommend posting the issue in the BFGMiner thread.

Hi Nate,

I am using a multipool, yes (Clevermining). Perhaps that's the cause then - I'll post it in the BFGminer thread.

I've found my Blizzard is not detected unless I use --set zeusminer:ignore_golden_nonce=1. It seems to be detected fine after putting in that flag.

Thanks for following up. That sounds expected with BFGMiner unfortunately. When the Multipool changes blockchains the hashrate in BFGMiner drops.

Riley600

full member

Activity: 186

Merit: 100

Quote from: nwoolls on November 29, 2014, 03:51:16 AM

Quote from: Riley600 on November 29, 2014, 01:21:19 AM

Hi Nate - I'm having issues with BFGminer in Minera. The hashrate for my 7 Gridseed Orbs and 1 Zeusminer Blizzard will start normally but begin to taper off as time goes on. The CGminer fork seems to produce much more consistent hashrates but does seem to crash after a few days. I'd like to use BFGminer but I'd need to resolve the decaying hashrate issue before I can. When I was using it on Windows with the same setup, BFGminer also exhibited similar behaviour.

I would be happy to let you remote into my Minera installation to take a look. I'll PM to discuss. Thanks for your support!

Thanks Riley.

The issue I am currently looking to reproduce is the report that ZeusMiner hardware does not work at all. I am leaning towards this being an issue with the default clock being set too high in the driver as discussed in the BFGMiner thread here.

If you are having an issue with hashrate dropping, are you using a multipool? If so this is a known issue with BFGMiner and I'd recommend posting the issue in the BFGMiner thread.

Hi Nate,

I am using a multipool, yes (Clevermining). Perhaps that's the cause then - I'll post it in the BFGminer thread.

I've found my Blizzard is not detected unless I use --set zeusminer:ignore_golden_nonce=1. It seems to be detected fine after putting in that flag.

nwoolls

hero member

Activity: 840

Merit: 1002

Quote from: Riley600 on November 29, 2014, 01:21:19 AM

Hi Nate - I'm having issues with BFGminer in Minera. The hashrate for my 7 Gridseed Orbs and 1 Zeusminer Blizzard will start normally but begin to taper off as time goes on. The CGminer fork seems to produce much more consistent hashrates but does seem to crash after a few days. I'd like to use BFGminer but I'd need to resolve the decaying hashrate issue before I can. When I was using it on Windows with the same setup, BFGminer also exhibited similar behaviour.

I would be happy to let you remote into my Minera installation to take a look. I'll PM to discuss. Thanks for your support!

Thanks Riley.

The issue I am currently looking to reproduce is the report that ZeusMiner hardware does not work at all. I am leaning towards this being an issue with the default clock being set too high in the driver as discussed in the BFGMiner thread here.

If you are having an issue with hashrate dropping, are you using a multipool? If so this is a known issue with BFGMiner and I'd recommend posting the issue in the BFGMiner thread.

Riley600

full member

Activity: 186

Merit: 100

Quote from: nwoolls on November 18, 2014, 12:19:09 PM

Quote from: toptek on November 18, 2014, 11:07:19 AM

that's it no other reason the miners don't like any other version of BFGMINER . I read a lot of post and complaints from other on these forums as well about that it , even on the Zeus's forums .

Where are you seeing these complaints? They aren't in the BFGMiner thread.

It would be awesome if you or any of these other numerous users could spend a little more time than you are already to post these details in the BFGMiner thread. I (the author of the ZeusMiner driver) have already offered to help address the situation.

I'd be happy to remote in (via SSH, VNC, RDP, whatever works) and help. And while supporting forks is I'm sure a great feature for Minera, what you are asking for specifically is support for a fork that hasn't been touched or worked on in months, since before the official BFGMiner driver for ZeusMiner was released, while the author of said driver is offering to help you fix the issue Wink

Hi Nate - I'm having issues with BFGminer in Minera. The hashrate for my 7 Gridseed Orbs and 1 Zeusminer Blizzard will start normally but begin to taper off as time goes on. The CGminer fork seems to produce much more consistent hashrates but does seem to crash after a few days. I'd like to use BFGminer but I'd need to resolve the decaying hashrate issue before I can. When I was using it on Windows with the same setup, BFGminer also exhibited similar behaviour.

I would be happy to let you remote into my Minera installation to take a look. I'll PM to discuss. Thanks for your support!

xx3

newbie

Activity: 30

Merit: 0

Quote from: michelem on November 28, 2014, 01:00:42 PM

Quote from: xx3 on November 27, 2014, 05:57:13 PM

Quote from: toptek on November 27, 2014, 05:24:14 PM

Quote from: xx3 on November 27, 2014, 04:41:24 PM

I managed to install Minera on my Raspberry Pi.

My miner is ASICMiner Prisma and i have trouble with detecting the miner in Minera.

Any guide for this particular device ?

This might help not sure https://www.wtcr.ca/content/block-erupter-controller-setup I only really evry had one tube and never got it to work right so sold it .

I do not have a block erupter controller, so this surely does not apply. Anyone ever used Minera with ASICMiner Prisma ?
Thanks.

Please read here https://www.cryptocoinsnews.com/review-asicminer-returns-prisma-1-4-ths-bitcoin-miner/
As it has only an ethernet connection you have a couple of chances:

1 you use another controller to proxy it to Minera
2 buy a usb adapter

I have the USB adapter. Kinda need a guide to make it work using this USB adapter.

Chryses

newbie

Activity: 55

Merit: 0

Quote from: toptek on November 25, 2014, 11:30:55 PM

honestly this is only thing ive found that works well with any zeus miner or seeds thu the seeds work with all most anything . i looked for hours on end and you can use it in Minera, Mich told me how to

[...]

Wow, tnx, is an huge works, tnx.

For now, with the solution that I posted works.

I've only one question if I use balance option, or load balance and I activate the donation option, I don't know what minera do, because the donation make a new pool but the balance option, distribute all power hash to all pool.

So, what minera do in this case?

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: xx3 on November 27, 2014, 05:57:13 PM

Quote from: toptek on November 27, 2014, 05:24:14 PM

Quote from: xx3 on November 27, 2014, 04:41:24 PM

I managed to install Minera on my Raspberry Pi.

My miner is ASICMiner Prisma and i have trouble with detecting the miner in Minera.

Any guide for this particular device ?

This might help not sure https://www.wtcr.ca/content/block-erupter-controller-setup I only really evry had one tube and never got it to work right so sold it .

I do not have a block erupter controller, so this surely does not apply. Anyone ever used Minera with ASICMiner Prisma ?
Thanks.

Please read here https://www.cryptocoinsnews.com/review-asicminer-returns-prisma-1-4-ths-bitcoin-miner/
As it has only an ethernet connection you have a couple of chances:

1 you use another controller to proxy it to Minera
2 buy a usb adapter

xx3

newbie

Activity: 30

Merit: 0

Quote from: toptek on November 27, 2014, 05:24:14 PM

Quote from: xx3 on November 27, 2014, 04:41:24 PM

I managed to install Minera on my Raspberry Pi.

My miner is ASICMiner Prisma and i have trouble with detecting the miner in Minera.

Any guide for this particular device ?

This might help not sure https://www.wtcr.ca/content/block-erupter-controller-setup I only really evry had one tube and never got it to work right so sold it .

I do not have a block erupter controller, so this surely does not apply. Anyone ever used Minera with ASICMiner Prisma ?
Thanks.

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: xx3 on November 27, 2014, 04:41:24 PM

I managed to install Minera on my Raspberry Pi.

My miner is ASICMiner Prisma and i have trouble with detecting the miner in Minera.

Any guide for this particular device ?

This might help not sure https://www.wtcr.ca/content/block-erupter-controller-setup I only really evry had one tube and never got it to work right so sold it .

xx3

newbie

Activity: 30

Merit: 0

I managed to install Minera on my Raspberry Pi.

My miner is ASICMiner Prisma and i have trouble with detecting the miner in Minera.

Any guide for this particular device ?

AzurePlatinum

newbie

Activity: 1

Merit: 0

Hello, I have set up Minera just fine, and I love it. Thanks! However, Minera has trouble detecting my device. I am using an ethernet cord, and a regular 333mhz ASICMiner. It's connected to a port which has worked fine on other devices, etc. Any suggestions?

toptek

legendary

Activity: 1274

Merit: 1000

Quote from: Chryses on November 25, 2014, 03:45:11 PM

I looked at the logs:

Code:

[2014-11-23 12:52:02] Started cgminer 4.3.5
 [2014-11-23 12:52:02] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2014-11-23 12:52:03] USB init, open device failed, err -3, you don't have privilege to access - GSD device 1:13
 [2014-11-23 12:52:03] See README file included for help
 [2014-11-23 12:52:03] gridseed detect (1:13) failed to initialise (incorrect device?)
 [2014-11-23 12:52:03] USB init, open device failed, err -3, you don't have privilege to access - GSD device 1:12
 [2014-11-23 12:52:03] See README file included for help
 [2014-11-23 12:52:03] gridseed detect (1:12) failed to initialise (incorrect device?)
 [2014-11-23 12:52:03] No devices detected!
...

If I start the ./cgmin.... with sudo, everything works, but I don't know how to make a command with screen. So I tried to activate the root option, but the command is always the same, on miner settings, with or without root activated:

Code:

/usr/bin/screen -dmS cgminerdmaxlzeus /var/www/minera/minera-bin/cgminer-dmaxl-zeus --scrypt --balance --gridseed-options=baud=115200,freq=850,chips=5 -c /var/www/minera/conf/miner_conf.json

Anyway I found a solution, I don't know exactly what kind of solution worked, but now works.
I applied 2 modif:
1. sudo usermod -G plugdev -a `whoami`
But don't work, so I applied sudo usermod -G minera -a `whoami`
2. I copied sudo cp 01-cgminer.rules /etc/udev/rules.d/ but I used the 01-cgminer.rules from cgminer-dmaxl-zeus, the file is lightly different, contains the gridseed configuration

J

honestly this is only thing ive found that works well with any zeus miner or seeds thu the seeds work with all most anything . i looked for hours on end and you can use it in Minera, Mich told me how to

http://blog.rastating.com/mining-dogecoin-with-a-zeusminer-blizzard-and-a-raspberry-pi/ even on zoomhash there latest version has that version in it . http://zoomhash.com/pages/raspberry-pi-software-update

that works with the Seeds i tested before i sold what i had . below

what you do to make it work in Minera is log into minera by SHH then do this http://blog.rastating.com/mining-dogecoin-with-a-zeusminer-blizzard-and-a-raspberry-pi/ once you have it inside minera just over write the BFGMINER file in cd /var/www/minera/minera-bin then look for the BFGMINER Progarm under cd /var/www/minera/minera-bin/src and over the whole Directly with the one you made form this post http://blog.rastating.com/mining-dogecoin-with-a-zeusminer-blizzard-and-a-raspberry-pi/ and your set . i also used this http://winscp.net/eng/index.php?#utm_source=winscp&utm_medium=app&utm_campaign=5.5.6 to make the copy and paste easier .

check this out

https://litecointalk.org/index.php?topic=20477.0 it may say frozen but a lot of Zeus owner use that fork I've noticed .

and the BFG version in minera should just work out of the box i just sold my Seeds so i can get some cash ready for the L1s next month . it worked well with all the seeds i had and btw all the Gaw gear is one version or another of a zeus miner sense they have merged .

For the seeds try this https://github.com/dmaxl/cgminer

Gridseed

./autogen.sh
./configure --enable-scrypt --enable-gridseed
make

GC3355-specific options can be specified via --gridseed-options or "gridseed-options" in the configuration file as a comma-separated list of sub-options:

   baud - miner baud rate (default 115200)
   freq - any frequency multiple of 12.5 MHz, non-integer frequencies rounded up (default 600)
   pll_r, pll_f, pll_od - fine-grained frequency tuning; see below
   chips - number of chips per device (default 5)
   per_chip_stats - print per-chip nonce generations and hardware failures (only for 5-chip models)
   start_port - first port number for scrypt proxy mode (default 3350); see below
   voltage - switch the voltage to the GC3355 chips; see below
   led_off - turn off the LEDs on the Gridseed miner

When mining scrypt-only this version of cgminer does not initialize the SHA cores so that power usage is low. On a 5-chip USB miner, power usage is around 10 W.

Gridseed support is based largely on the original Gridseed CGMiner and dtbartle's scrypt modifications.
Frequency Tuning

If pll_r/pll_f/pll_od are specified, freq is ignored, and calculated as follows:

   Fin = 25
   Fref = int(Fin / (pll_r + 1))
   Fvco = int(Fref * (pll_f + 1))
   Fout = int(Fvco / (1 << pll_od))
   freq = Fout

Dual Mining

When dual-mining start_port will set the listening proxy port of the first gridseed device on the SHA256 instance of cgminer, with additional miners using successive ports. The scrypt instance of cgminer will attempt to connect starting at this port.

When dual mining, start the SHA mining instance of cgminer first, wait for it to begin mining and then start the scrypt version. The second instance will detect that the USB ports are in use and will attempt to connect to the first via UDP.

If everything is working the same devices will appear in both cgminer windows.
Voltage Modding

If voltage=1 is set the gridseed chips will be switched to an alternate voltage. Specifically, this flag will cause the MCU to assert the VID0 input to the voltage regulator. This requires a voltmodded miner. On a stock unit this will actually reduce the regulator's output voltage.
More Complex Options

The options can also be specified for each device individually by serial number via --gridseed-freq or --gridseed-override or their configuration file equivalents. --gridseed-freq takes a comma-separated list of serial number to frequency mappings while --gridseed-override takes the same format as --gridseed-options:

--gridseed-freq "=[,...]"

--gridseed-override ":freq=,voltage=<0/1>[,...];:freq=[,...[;.

OYEA FREE COINS every day just trade them up on that site

https://cryptex.biz/user/profile/coin-giveaway

Chryses

newbie

Activity: 55

Merit: 0

I looked at the logs:

Code:

[2014-11-23 12:52:02] Started cgminer 4.3.5
 [2014-11-23 12:52:02] Loaded configuration file /var/www/minera/conf/miner_conf.json
 [2014-11-23 12:52:03] USB init, open device failed, err -3, you don't have privilege to access - GSD device 1:13
 [2014-11-23 12:52:03] See README file included for help
 [2014-11-23 12:52:03] gridseed detect (1:13) failed to initialise (incorrect device?)
 [2014-11-23 12:52:03] USB init, open device failed, err -3, you don't have privilege to access - GSD device 1:12
 [2014-11-23 12:52:03] See README file included for help
 [2014-11-23 12:52:03] gridseed detect (1:12) failed to initialise (incorrect device?)
 [2014-11-23 12:52:03] No devices detected!
...

If I start the ./cgmin.... with sudo, everything works, but I don't know how to make a command with screen. So I tried to activate the root option, but the command is always the same, on miner settings, with or without root activated:

Code:

/usr/bin/screen -dmS cgminerdmaxlzeus /var/www/minera/minera-bin/cgminer-dmaxl-zeus --scrypt --balance --gridseed-options=baud=115200,freq=850,chips=5 -c /var/www/minera/conf/miner_conf.json

Anyway I found a solution, I don't know exactly what kind of solution worked, but now works.
I applied 2 modif:
1. sudo usermod -G plugdev -a `whoami`
But don't work, so I applied sudo usermod -G minera -a `whoami`
2. I copied sudo cp 01-cgminer.rules /etc/udev/rules.d/ but I used the 01-cgminer.rules from cgminer-dmaxl-zeus, the file is lightly different, contains the gridseed configuration

J

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: Chryses on November 25, 2014, 05:31:23 AM

Hi, I'm using the CGminer Dmaxl Zeus fork, but on start the miner can't access to the usb, so I tried to enable the superuser/root, but the situation don't change, how can I fix it?

Tnx

That's weird, how can you say it's a USB problem? Did you look at logs? Can we look at them? /var/logs/minera keep the dmaxl one (don't remember the exact name).

Chryses

newbie

Activity: 55

Merit: 0

Hi, I'm using the CGminer Dmaxl Zeus fork, but on start the miner can't access to the usb, so I tried to enable the superuser/root, but the situation don't change, how can I fix it?

Tnx

michelem

legendary

Activity: 1015

Merit: 1000

Quote from: Lumanet on November 24, 2014, 10:53:28 PM

[...]
Can anyone help me ?? I did setup nginx this way :

root@RP-SM01:/etc/nginx/sites-enabled# cat default

server {
listen 80;
#listen [::]:80 default_server ipv6only=on;

location / {
rewrite ^(.*) https://192.168.1.117/$1 permanent;
}
}

server {
listen 443 ssl;
#listen [::]:443 default_server ipv6only=on;

ssl on;
ssl_certificate /etc/ssl/certs/nginx.crt;
ssl_certificate_key /etc/ssl/certs/nginx.key;

ssl_session_timeout 5m;

ssl_protocols SSLv3 TLSv1;
ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP;
ssl_prefer_server_ciphers on;

root /usr/share/nginx/www;
index index.html index.htm index.php;

server_name RP-SM01.lumanet.info;

location / {
# First attempt to serve request as file, then
# as directory, then fall back to displaying a 404.
try_files $uri $uri/ /index.html;
# Uncomment to enable naxsi on this location
# include /etc/nginx/naxsi.rules
allow all;
}
location ~ \.php($|/) {
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fastcgi_params;
fastcgi_param HTTPS on;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
allow all;
}
location /minera {
autoindex on;
allow all;
}

}

#########################################################################

anyone any ideas Huh

THX

Nginx should be fine. Did you install Redis? Did you run the install script?
Please follow the manual installation section here: https://github.com/michelem09/minera#installing or check to have done this:

Code:

sudo apt-get install -y redis-server git screen php5-cli php5-curl
cd /var/www
sudo git clone https://github.com/michelem09/minera
cd minera
sudo ./install_minera.sh

Then, if something goes wrong again, check the PHP logs not the Nginx ones.

Lumanet

newbie

Activity: 46

Merit: 0

Hey,

I do have a PI B+ with nginx and php5-fpm running but ran out of ideas why in the world minera which shows up don't let me sign in.....

Anyone has some ideas how I can troubleshoot this? nginx error log is clean just access log shows :

192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/AdminLTE.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/font-awesome.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/ion.rangeSlider.skinFlat.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/ion.rangeSlider.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/datatables/dataTables.bootstrap.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/custom.css?ver=20140819 HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/jquery.fileupload-ui.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/morris.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/css/jquery.fileupload.css HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/js/bootstrap.min.js HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/js/jquery-2.1.1.min.js HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/img/avatar.png HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:46:11 +0000] "GET /minera/assets/img/bg-dark.jpg HTTP/1.1" 304 0 "https://192.168.1.117/minera/assets/css/custom.css?ver=20140819" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:47:03 +0000] "POST /minera/index.php/app/login HTTP/1.1" 302 5 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:47:05 +0000] "GET /minera/index.php/app/index HTTP/1.1" 200 1746 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"
192.168.1.109 - - [25/Nov/2014:03:47:05 +0000] "GET /minera/assets/css/custom.css?ver=20140819 HTTP/1.1" 304 0 "https://192.168.1.117/minera/index.php/app/index" "Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0"

Can anyone help me ?? I did setup nginx this way :

root@RP-SM01:/etc/nginx/sites-enabled# cat default

server {
listen 80;
#listen [::]:80 default_server ipv6only=on;

location / {
rewrite ^(.*) https://192.168.1.117/$1 permanent;
}
}

server {
listen 443 ssl;
#listen [::]:443 default_server ipv6only=on;

ssl on;
ssl_certificate /etc/ssl/certs/nginx.crt;
ssl_certificate_key /etc/ssl/certs/nginx.key;

ssl_session_timeout 5m;

ssl_protocols SSLv3 TLSv1;
ssl_ciphers ALL:!ADH:!EXPORT56:RC4+RSA:+HIGH:+MEDIUM:+LOW:+SSLv3:+EXP;
ssl_prefer_server_ciphers on;

root /usr/share/nginx/www;
index index.html index.htm index.php;

server_name RP-SM01.lumanet.info;

location / {
# First attempt to serve request as file, then
# as directory, then fall back to displaying a 404.
try_files $uri $uri/ /index.html;
# Uncomment to enable naxsi on this location
# include /etc/nginx/naxsi.rules
allow all;
}
location ~ \.php($|/) {
fastcgi_split_path_info ^(.+\.php)(/.+)$;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
include fastcgi_params;
fastcgi_param HTTPS on;
fastcgi_param PATH_INFO $fastcgi_path_info;
fastcgi_param PATH_TRANSLATED $document_root$fastcgi_path_info;
fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
fastcgi_param SCRIPT_NAME $fastcgi_script_name;
allow all;
}
location /minera {
autoindex on;
allow all;
}

}

#########################################################################

anyone any ideas Huh

THX

Topic: [Minera v0.9.0] Your next mining dashboard - S9/L3+/D3/CPUminer/CGminer/BFGminer - page 92. (Read 850502 times)