We started using twitter, if you interested with the developement,
news, or just want faster response to your question.. follow us on twitter.
http://twitter.com/minerstatcom
Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 104. (Read 167182 times)
June 15, 2017, 12:32:33 PM
June 15, 2017, 12:27:32 PM
Not sure if it's a minerstat problem but for some reason my Eth per month just went from 8.3 to 6.4 in a matter of minutes with no change in hashrate. Was there some massive difficulty spike. The online calculators I check still say I should be at 8.3 Eth/month.
June 14, 2017, 03:37:58 PM
Feature Request : If we switch the miner using Remote , can the default miner in config.txt be changed to this miner
As when ever Computer restarts its goes back to the miner in the config.txt
As when ever Computer restarts its goes back to the miner in the config.txt
is it necessary to basically run a micro pool server on that PC and then point the mini miners toward your micro pool and go from there?
i don't clearly understand this question.
Basically If I have setup ewfb-zec in config.txt , when ever i open node(restart pc or pc crashes and reboots) it starts ewfb-zec.
This is good.
But if I use remote to switch to ccminer-tp, it starts ccminer and closes ewfb
but if my pc crashes or reboots , it starts ewfb instead of ccminer
What I want is for node app to modify the config.txt in root folder to change miner when ever we use remote to switch miner
i fix that with the next version
June 14, 2017, 02:59:30 PM
Feature Request : If we switch the miner using Remote , can the default miner in config.txt be changed to this miner
As when ever Computer restarts its goes back to the miner in the config.txt
As when ever Computer restarts its goes back to the miner in the config.txt
is it necessary to basically run a micro pool server on that PC and then point the mini miners toward your micro pool and go from there?
i don't clearly understand this question.
Basically If I have setup ewfb-zec in config.txt , when ever i open node(restart pc or pc crashes and reboots) it starts ewfb-zec.
This is good.
But if I use remote to switch to ccminer-tp, it starts ccminer and closes ewfb
but if my pc crashes or reboots , it starts ewfb instead of ccminer
What I want is for node app to modify the config.txt in root folder to change miner when ever we use remote to switch miner
June 14, 2017, 12:53:05 PM
I just set up another rig only a few cards cause the lack of them but I wanted to give ubuntu a try so I have 2 xfx rx570 installed Ubuntu 16.04 downloaded the recent amd pro drivers and got a warning about having to run in under secure mode for Bios so I ok it than installed minerstat by your directions all was good but it wouldn't start it loaded claymore miner but than said something about something txt sorry it was late anyway I just installed win 10 but could you give me some advice on how to get Ubuntu setup with rx570 and how do I set the clocks if I do get it going does claymore miner clock settings work in Linux thank you
You need to put all of your settings to the gpu bios (gpu clock, offset, voltages, default memory clock etc..). After work at the same on linux. Maybe 1-2% higher at the same consumption.
June 14, 2017, 11:32:26 AM
I just set up another rig only a few cards cause the lack of them but I wanted to give ubuntu a try so I have 2 xfx rx570 installed Ubuntu 16.04 downloaded the recent amd pro drivers and got a warning about having to run in under secure mode for Bios so I ok it than installed minerstat by your directions all was good but it wouldn't start it loaded claymore miner but than said something about something txt sorry it was late anyway I just installed win 10 but could you give me some advice on how to get Ubuntu setup with rx570 and how do I set the clocks if I do get it going does claymore miner clock settings work in Linux thank you
You need to put all of your settings to the gpu bios (gpu clock, offset, voltages, default memory clock etc..). After work at the same on linux. Maybe 1-2% higher at the same consumption.
June 14, 2017, 11:27:39 AM
I just set up another rig only a few cards cause the lack of them but I wanted to give ubuntu a try so I have 2 xfx rx570 installed Ubuntu 16.04 downloaded the recent amd pro drivers and got a warning about having to run in under secure mode for Bios so I ok it than installed minerstat by your directions all was good but it wouldn't start it loaded claymore miner but than said something about something txt sorry it was late anyway I just installed win 10 but could you give me some advice on how to get Ubuntu setup with rx570 and how do I set the clocks if I do get it going does claymore miner clock settings work in Linux thank you
June 14, 2017, 10:45:12 AM
Feature Request : If we switch the miner using Remote , can the default miner in config.txt be changed to this miner
As when ever Computer restarts its goes back to the miner in the config.txt
As when ever Computer restarts its goes back to the miner in the config.txt
is it necessary to basically run a micro pool server on that PC and then point the mini miners toward your micro pool and go from there?
i don't clearly understand this question.
How soon to wait for the launch of the pool or if it already has a way to start mining at pool minerstat.com
really soon. backend works well, i need to finish the frontend to easily can manage your workers, charts etc..
Also i want an optional (you can get your coin, but if you want you can autoconvert it) convert system to get your payout in ETH, BTC, LTC auto convert. 0.3-0.5% Fee only.
Not easy to develop, i'm the only one who create this. It can be easier if i have a team for this (Maybe one time
) June 14, 2017, 10:26:51 AM
How soon to wait for the launch of the pool or if it already has a way to start mining at pool minerstat.com
June 14, 2017, 07:32:25 AM
Feature Request : If we switch the miner using Remote , can the default miner in config.txt be changed to this miner
As when ever Computer restarts its goes back to the miner in the config.txt
As when ever Computer restarts its goes back to the miner in the config.txt
is it necessary to basically run a micro pool server on that PC and then point the mini miners toward your micro pool and go from there?
June 14, 2017, 04:08:45 AM
coinscrow, what happen to my minerstat. it can't sync, so all my rigs shown as "DOWN" on web, but the reality it still mining. I changed nothing, its started yesterday, I get notification from telegram that all of my rig was DOWN, but after I checked, they're still UP.
I had the same problem. There was a windows defender update deleting the node.exe file (again big FU to windows).
To fix this go to windows defender security center. Click the left icon, anti virus and security something (I dont use English windows). Click the 2nd option from the bottom, should say something like settings. In this screen again click the 2nd link from the bottom and add the folder where you keep your mining software to the exclusion. Re-download the miningsoftware and put it in the folder you excluded.
Happy mining again
With all the crap windows is tossing at us lately the need for linux OS becomes more urgent every day. In the git page I see the comment "Tested on Ubuntu, with Nvidia & AMD GPU's..". Coinscrow can you please share a link of the exact distro I can download? My experience with linux is too limited to find this out myself.
-_-'' windows..
i dont know why my software detected as virus, maybe the disassembly protection.
in a rig i think should disable windows update and defender to can keep away these problems..
June 14, 2017, 04:02:33 AM
Feature Request : If we switch the miner using Remote , can the default miner in config.txt be changed to this miner
As when ever Computer restarts its goes back to the miner in the config.txt
As when ever Computer restarts its goes back to the miner in the config.txt
June 14, 2017, 01:54:24 AM
coinscrow, what happen to my minerstat. it can't sync, so all my rigs shown as "DOWN" on web, but the reality it still mining. I changed nothing, its started yesterday, I get notification from telegram that all of my rig was DOWN, but after I checked, they're still UP.
I had the same problem. There was a windows defender update deleting the node.exe file (again big FU to windows).
To fix this go to windows defender security center. Click the left icon, anti virus and security something (I dont use English windows). Click the 2nd option from the bottom, should say something like settings. In this screen again click the 2nd link from the bottom and add the folder where you keep your mining software to the exclusion. Re-download the miningsoftware and put it in the folder you excluded.
Happy mining again
With all the crap windows is tossing at us lately the need for linux OS becomes more urgent every day. In the git page I see the comment "Tested on Ubuntu, with Nvidia & AMD GPU's..". Coinscrow can you please share a link of the exact distro I can download? My experience with linux is too limited to find this out myself.
June 14, 2017, 01:45:34 AM
Since the update it can no longer find the client. I changed it to claymore-dual and updated settings in minerstat webpage, it is not finding the client
June 13, 2017, 08:52:58 PM
coinscrow, what happen to my minerstat. it can't sync, so all my rigs shown as "DOWN" on web, but the reality it still mining. I changed nothing, its started yesterday, I get notification from telegram that all of my rig was DOWN, but after I checked, they're still UP.
June 13, 2017, 07:34:35 PM
Couple quick questions. Is it possible to point the app/software at just a normal PC or is it just ASIC's and purpose-built rigs?
If the answer to the first question is yes, then can a person with perhaps a bunch of USB miners, not these days lol, all running connected to a single PC to have that data "pooled" treating the PC as a single mining unit
At this time the Minerstat application only supports Windows and Linux GPU mining rigs. (Thus far no ASIC and no USB miners support but yes you can use a normal PC with a single or more GPU)
June 13, 2017, 05:27:43 PM
Couple quick questions. Is it possible to point the app/software at just a normal PC or is it just ASIC's and purpose-built rigs?
If the answer to the first question is yes, then can a person with perhaps a bunch of USB miners, not these days lol, all running connected to a single PC to have that data "pooled" treating the PC as a single mining unit
June 13, 2017, 05:25:44 PM
Couple quick questions. Is it possible to point the app/software at just a normal PC or is it just ASIC's and purpose-built rigs?
June 13, 2017, 11:47:07 AM
Coincrow I have run into some issues since the update from the other day. I am getting errors in CCMiner and can not get ewbf to work at all.
I have some screen shots of each here. I am able to get Claymore Eth to work just fine though?
These are all fresh uploads of 2.9.1.0. I cant even get it to open a window for ewbf and I have the --pause command at the end so it should open and freeze if there is an issue right?
I have some screen shots of each here. I am able to get Claymore Eth to work just fine though?
These are all fresh uploads of 2.9.1.0. I cant even get it to open a window for ewbf and I have the --pause command at the end so it should open and freeze if there is an issue right?
--pause is wrong ..
just pause the stop command.
Work me perfect (all miner), but the new client will easier your job.
Telegram ... Go to the website and select worker.
Can someone point me to the screen where i can set this one, only email alert visible.
Thx.
Can someone point me to the screen where i can set this one, only email alert visible.
Thx.
i fixed telegram webhook to point the new server.
If you now write your accesskey to the bot you will show the Telegram option at the Alerts menu.
June 13, 2017, 10:39:30 AM
Coincrow I have run into some issues since the update from the other day. I am getting errors in CCMiner and can not get ewbf to work at all.
I have some screen shots of each here. I am able to get Claymore Eth to work just fine though?
These are all fresh uploads of 2.9.1.0. I cant even get it to open a window for ewbf and I have the --pause command at the end so it should open and freeze if there is an issue right?
I have some screen shots of each here. I am able to get Claymore Eth to work just fine though?
These are all fresh uploads of 2.9.1.0. I cant even get it to open a window for ewbf and I have the --pause command at the end so it should open and freeze if there is an issue right?
Jump to: