Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 107. (Read 167182 times)
June 10, 2017, 08:31:15 AM
I did it from windows but when i'm changing my HardDrive, the speed remains the same, how can I change my bios from Ubuntu ? I don't find any tuto
June 10, 2017, 07:52:31 AM
I have sapphire GPUs, I'm about to flash my bios.
But then under Ubuntu, do you know a tool to undervolt ?
But then under Ubuntu, do you know a tool to undervolt ?
you cant currently. you need to put your voltage settings to your bios after work with linux
The post linked in the OP about COIN ALGO says that users donating 5$ will be able to use it. Does that need to be updated? I didn't see a 5$ donation option anywhere on the website.
its free. only one thing limited. worker / accesskey.
June 10, 2017, 07:42:56 AM
The post linked in the OP about COIN ALGO says that users donating 5$ will be able to use it. Does that need to be updated? I didn't see a 5$ donation option anywhere on the website.
June 10, 2017, 07:41:45 AM
I have sapphire GPUs, I'm about to flash my bios.
But then under Ubuntu, do you know a tool to undervolt ?
But then under Ubuntu, do you know a tool to undervolt ?
June 10, 2017, 06:15:54 AM
Ok I am still having issues... I have tried the auto-update inside the MS folder and after it is done it starts the page white page with the circle status in the bottom right but doesnt actually open a miner?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
Similar thing happened to me few weeks back and I found I was incorrectly using all caps for the miner type in the config file. Has to be lowercase and make sure there's no typos. Just one character off and it won't open anything. Check README in MS install directory for exact guidance.
you right!
next version v3.0 comes with integrated settings menu on the node, so i easier the setup.
Is there a way to optimize my GPUs to get more hash rate ? I only get 21MH on ETH per GPU.
And also to use less power ?
And also to use less power ?
thats not releated to the application. you need to edit the bios on the gpu and use some gpu tweak program.
amd: watttool, msi afterburner, depends on your gpu
June 10, 2017, 06:10:28 AM
Is there a way to optimize my GPUs to get more hash rate ? I only get 21MH on ETH per GPU.
And also to use less power ?
And also to use less power ?
June 09, 2017, 10:40:04 PM
Ok I am still having issues... I have tried the auto-update inside the MS folder and after it is done it starts the page white page with the circle status in the bottom right but doesnt actually open a miner?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
Similar thing happened to me few weeks back and I found I was incorrectly using all caps for the miner type in the config file. Has to be lowercase and make sure there's no typos. Just one character off and it won't open anything. Check README in MS install directory for exact guidance.
June 09, 2017, 07:39:15 PM
Ok I am still having issues... I have tried the auto-update inside the MS folder and after it is done it starts the page white page with the circle status in the bottom right but doesnt actually open a miner?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
did you edited prev. the hosts file?
June 09, 2017, 06:37:06 PM
Ok I am still having issues... I have tried the auto-update inside the MS folder and after it is done it starts the page white page with the circle status in the bottom right but doesnt actually open a miner?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
I have since deleted all MS files from my computer and downloaded/re-installed fresh 2.9.1 and it is still doing the same thing?
June 09, 2017, 12:30:50 PM
something wrong with the server
some rig offline
some rig offline
currently i didnt see any problem. can you describe your problem?
https://minerstat.com/public/truongdehv.html
sometime 5 minutes to update the database. and sometime the website report the rig offline
i updated the sync database a few hours ago, it can be cause some bad telegram, email message.
ok thank for your support.
June 09, 2017, 12:29:09 PM
something wrong with the server
some rig offline
some rig offline
currently i didnt see any problem. can you describe your problem?
https://minerstat.com/public/truongdehv.html
sometime 5 minutes to update the database. and sometime the website report the rig offline
i updated the sync database a few hours ago, it can be cause some bad telegram, email message.
June 09, 2017, 12:23:56 PM
something wrong with the server
some rig offline
some rig offline
currently i didnt see any problem. can you describe your problem?
https://minerstat.com/public/truongdehv.html
sometime 5 minutes to update the database. and sometime the website report the rig offline
June 09, 2017, 12:12:02 PM
something wrong with the server
some rig offline
some rig offline
I have gotten a few rig offline emails but when checking they were in face online and running. So probably just some side effects from the database migration.
June 09, 2017, 12:08:00 PM
something wrong with the server
some rig offline
some rig offline
currently i didnt see any problem. can you describe your problem?
June 09, 2017, 12:05:46 PM
something wrong with the server
some rig offline
some rig offline
June 09, 2017, 11:14:16 AM
yep all my config files were toast. I tried to update my config files on the site and now the site is down?
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
@Bones972 -Make sure you check the config.txt file in the Minerstat directory on your rigs. That's the file that has your access key, worker name, and specifies which miner to start when the node starts. Those files were getting set back to default during the updates at one point.
You might look into Chrome Remote Desktop or using the VNC feature so you can access your miners remotely. It's been very handy for me at times. I can even access miners desktop from my phone.
Yep I saw that the Config was reset. I always keep a copy of my Config on my desktop so it's a simple drag and drop into the miner when ever I update or re-install.
I have been using Team Viewer for remote in's but it sometimes causes issues on my Video cards, I can see the power fluctuate over Afterburner. I have thought about Chrome Remote Desktop but what is VNC? My problem this week was being on a cruise and not having reliable internet (and a secondary issue, a girlfriend who would have killed me if I had been online working on miners while on a cruise!)
Toss her overboard she will cost you money while your miners make you money! hahaha jk. I have the same issue with the wife. She complains I spend too much time working on my miners but I throw her a couple hundred dollars a month to appease her curiosity. Also don't tell her how much you make from mining otherwise she will ask you for more things!
June 09, 2017, 04:00:35 AM
yep all my config files were toast. I tried to update my config files on the site and now the site is down?
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
@Bones972 -Make sure you check the config.txt file in the Minerstat directory on your rigs. That's the file that has your access key, worker name, and specifies which miner to start when the node starts. Those files were getting set back to default during the updates at one point.
You might look into Chrome Remote Desktop or using the VNC feature so you can access your miners remotely. It's been very handy for me at times. I can even access miners desktop from my phone.
Yep I saw that the Config was reset. I always keep a copy of my Config on my desktop so it's a simple drag and drop into the miner when ever I update or re-install.
I have been using Team Viewer for remote in's but it sometimes causes issues on my Video cards, I can see the power fluctuate over Afterburner. I have thought about Chrome Remote Desktop but what is VNC? My problem this week was being on a cruise and not having reliable internet (and a secondary issue, a girlfriend who would have killed me if I had been online working on miners while on a cruise!)
June 09, 2017, 12:21:28 AM
I am waiting for
LINUX OS, COMING SOON!
not the app you have now, if you happen to notice, i don't use my account much I use ethos on my three four card RIGS and on my two PC with single cards for every day use , i use windows and don't care much for any of the LINUX desktops but love there server version and found out using LINUX on Rigs with 3 or more cards is much more stable then windows ... for me ,,, i know some use windows and not taking a way from it , i just don't have the patience, i use to any more.. and just want to set it up fast and have it boot every time at the same setting on a 16 GB SSD etc ....without adjusting a lot of shit to make it run stable ..... at one time i didn't mine, but do now .
LINUX OS, COMING SOON!
not the app you have now, if you happen to notice, i don't use my account much I use ethos on my three four card RIGS and on my two PC with single cards for every day use , i use windows and don't care much for any of the LINUX desktops but love there server version and found out using LINUX on Rigs with 3 or more cards is much more stable then windows ... for me ,,, i know some use windows and not taking a way from it , i just don't have the patience, i use to any more.. and just want to set it up fast and have it boot every time at the same setting on a 16 GB SSD etc ....without adjusting a lot of shit to make it run stable ..... at one time i didn't mine, but do now .
June 08, 2017, 09:28:05 PM
yep all my config files were toast. I tried to update my config files on the site and now the site is down?
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
Not a huge issue I just have them all running miners outside of Minerstat I mainly only use minerstat for monitoring them when I am away.... Really sucked being away for a week with no access to my miners!
@Bones972 -Make sure you check the config.txt file in the Minerstat directory on your rigs. That's the file that has your access key, worker name, and specifies which miner to start when the node starts. Those files were getting set back to default during the updates at one point.
You might look into Chrome Remote Desktop or using the VNC feature so you can access your miners remotely. It's been very handy for me at times. I can even access miners desktop from my phone.
June 08, 2017, 09:13:09 PM
yep all my config files were toast. I tried to update my config files on the site and now the site is down?
IMPORTANT!!!
03:10 UTC (now) i made a full backup of the database, i fixed the issues.
CURRENTLY WE USE ONLY TEMP DATABASE, BECAUSE SOMEONE DOING BIND SQL INJECT ON THE SERVER.
it changes everything to 0, 1 VALUE.
.. So lonely, boring hacker. Give a thanks to him.
I need to update the website full script to prevent these folks.. within 24 hour, if playing again i will put back the current database backup..
Sorry guys, thats not effect on mining, just website.
** UPDATE: Almost all vulnerability has been patched. Backups are ready
Jump to: