All you need to know about our latest tool GPU BIOS flasher https://medium.com/minerstat/gpu-bios-flasher-26d00d1d0e37
Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 28. (Read 167182 times)
December 03, 2020, 03:34:11 AM
December 02, 2020, 10:19:34 AM
msOS Update
Added support for a few additional memory types to the worker page.
Solved an issue when instant OC values from worker profile did not apply accordingly.
Support for the new RTX 3060Ti. Install the newest 455.45.01 Nvidia driver with nvidia-update --install 455.45.01
msOS Miner Update
srbminer-multi v0.5.8
trex v0.19.1
Windows Miner Update
srbminer-multi v0.5.8
trex v0.19.1
srbminer-multi: Increased hashrate on Curvehash algorithm by ~10-13%. Fixed issue with MRR. Added parameter '--a0-is-zil', use it with '--multi-algorithm-job-mode 3' to mine ZIL.
trex: Minor performance improvements on Octopus algorithm.
Added support for a few additional memory types to the worker page.
Solved an issue when instant OC values from worker profile did not apply accordingly.
Support for the new RTX 3060Ti. Install the newest 455.45.01 Nvidia driver with nvidia-update --install 455.45.01
msOS Miner Update
srbminer-multi v0.5.8
trex v0.19.1
Windows Miner Update
srbminer-multi v0.5.8
trex v0.19.1
srbminer-multi: Increased hashrate on Curvehash algorithm by ~10-13%. Fixed issue with MRR. Added parameter '--a0-is-zil', use it with '--multi-algorithm-job-mode 3' to mine ZIL.
trex: Minor performance improvements on Octopus algorithm.
December 01, 2020, 09:54:08 PM
ETH Epoch #379
If you see any DAG generation error or error messages such as clcreatebuffer(-61).
Try to switch to a recently updated miner in the config editor, such as teamredminer, lolminer, nbminer, nanominer, trex.
All supported miner listed on this link: https://minerstat.com/coin/ETH
If you see any DAG generation error or error messages such as clcreatebuffer(-61).
Try to switch to a recently updated miner in the config editor, such as teamredminer, lolminer, nbminer, nanominer, trex.
All supported miner listed on this link: https://minerstat.com/coin/ETH
December 01, 2020, 02:09:53 PM
Hello coinscrow
I don't understand very well the msOS.
I want to test it but I am not sure if my Windows install will still stay alive after booting with the usb flashed key.
Is your OS able to run on its own using only USB drive ?
Thanks
I don't understand very well the msOS.
I want to test it but I am not sure if my Windows install will still stay alive after booting with the usb flashed key.
Is your OS able to run on its own using only USB drive ?
Thanks
Hello,
Sure you can flash to SSD/USB and boot from those.
You can start with this video: https://www.youtube.com/watch?v=gcwEcQFVDoo
There are lot of help content to start with on these links:
https://minerstat.com/help
https://medium.com/@minerstat
We are available on Discord for live chat, if you need any help:
https://minerstat.com/discord
December 01, 2020, 02:05:52 PM
msOS Miner Update
nbminer v34.4
trex v0.19.0
Windows Miner Update
nbminer v34.4
trex v0.19.0
nbminer: Etchash epoch switch fix, update recommended. More stable hashrate on Ethash under Windows. Improved hashrate 1-5% for Octopus on Nvidia 16, 20, 30 series GPUs, 29.2M on 1660s.
trex: Added Octopus algorithm (trex dev fee 2%)
BIOS flasher
Added BIOS flashing option to the dashboard for AMD GPUs. You can now flash multiple GPUs/Workers at once. Status is then saved to the activity log.
https://my.minerstat.com/bios-flasher Please report possible bugs/errors. Backups are automatically made from current BIOSes to /home/minerstat/bios folder.
Coins
Added Current 7 days and Current 30 days to coins pages. Try it on https://minerstat.com/coin/ETH
nbminer v34.4
trex v0.19.0
Windows Miner Update
nbminer v34.4
trex v0.19.0
nbminer: Etchash epoch switch fix, update recommended. More stable hashrate on Ethash under Windows. Improved hashrate 1-5% for Octopus on Nvidia 16, 20, 30 series GPUs, 29.2M on 1660s.
trex: Added Octopus algorithm (trex dev fee 2%)
BIOS flasher
Added BIOS flashing option to the dashboard for AMD GPUs. You can now flash multiple GPUs/Workers at once. Status is then saved to the activity log.
https://my.minerstat.com/bios-flasher Please report possible bugs/errors. Backups are automatically made from current BIOSes to /home/minerstat/bios folder.
Coins
Added Current 7 days and Current 30 days to coins pages. Try it on https://minerstat.com/coin/ETH
December 01, 2020, 10:26:28 AM
Hello coinscrow
I don't understand very well the msOS.
I want to test it but I am not sure if my Windows install will still stay alive after booting with the usb flashed key.
Is your OS able to run on its own using only USB drive ?
Thanks
I don't understand very well the msOS.
I want to test it but I am not sure if my Windows install will still stay alive after booting with the usb flashed key.
Is your OS able to run on its own using only USB drive ?
Thanks
November 30, 2020, 07:27:59 PM
November 29, 2020, 01:48:08 PM
msOS Update
Resolved an issue when mixed generation AMD GPU rigs some data were in the wrong place.
Resolved an issue with diagnostics script reporting false missing BUS ID.
msOS Miner Update
nbminer v34.2
Windows Miner Update
nbminer v34.2
nbminer: Reduced stale share ratio on Ethash algorithm.
Resolved an issue when mixed generation AMD GPU rigs some data were in the wrong place.
Resolved an issue with diagnostics script reporting false missing BUS ID.
msOS Miner Update
nbminer v34.2
Windows Miner Update
nbminer v34.2
nbminer: Reduced stale share ratio on Ethash algorithm.
November 28, 2020, 02:01:50 PM
msOS Update
New command: watchdog-reboot will reboot the rig with USB watchdog and makes it easier to test if hardware watchdog is working.
msOS Miner Update
ttminer v6.1.0
nbminer v34.1
Windows Miner Update
ttminer v6.1.0
nbminer v34.1
ttminer: Added support for Etchash algorithm.
nbminer: Improved hashrate for Ethash on Nvidia 10 series GPUs，3% higher hashrate under the same PowerLimit, or same hashrate with 5%-10% lower PowerLimit.
New command: watchdog-reboot will reboot the rig with USB watchdog and makes it easier to test if hardware watchdog is working.
msOS Miner Update
ttminer v6.1.0
nbminer v34.1
Windows Miner Update
ttminer v6.1.0
nbminer v34.1
ttminer: Added support for Etchash algorithm.
nbminer: Improved hashrate for Ethash on Nvidia 10 series GPUs，3% higher hashrate under the same PowerLimit, or same hashrate with 5%-10% lower PowerLimit.
November 27, 2020, 06:28:27 PM
msOS Miner Update
gminer v2.33
Windows Miner Update
gminer v2.33
gminer: Fixed critical bug caused miner restarts when running under watchdog. This bug appears in v2.30 and v2.31
gminer v2.33
Windows Miner Update
gminer v2.33
gminer: Fixed critical bug caused miner restarts when running under watchdog. This bug appears in v2.30 and v2.31
November 27, 2020, 05:20:48 PM
msOS Update
New command: logs
Toggle between saving log files to disk or RAM. Once storage is selected, a folder going to be created on /home/minerstat/logs. Every miner start resulting in one text file with a timestamp for an easier overlook. To turn off just enter logs again.
New command: netcheck
Find out the root cause of connection errors more quickly. This tool checking minerstat servers, name servers, host files, and local gateway too.
New command: logs
Toggle between saving log files to disk or RAM. Once storage is selected, a folder going to be created on /home/minerstat/logs. Every miner start resulting in one text file with a timestamp for an easier overlook. To turn off just enter logs again.
New command: netcheck
Find out the root cause of connection errors more quickly. This tool checking minerstat servers, name servers, host files, and local gateway too.
November 27, 2020, 09:41:01 AM
msOS Miner Update
nanominer v3.1.2
phoenix-eth v5.3b
Windows Miner Update
nanominer v3.1.2
phoenix-eth v5.3b
nanominer: Octopus algorithm (Conflux) performance improvements for Nvidia GPUs.
phoenix-eth: Added support for the new Etchash algorithm. If you want to mine ETC, you should add -coin etc to your command-line.
nanominer v3.1.2
phoenix-eth v5.3b
Windows Miner Update
nanominer v3.1.2
phoenix-eth v5.3b
nanominer: Octopus algorithm (Conflux) performance improvements for Nvidia GPUs.
phoenix-eth: Added support for the new Etchash algorithm. If you want to mine ETC, you should add -coin etc to your command-line.
November 27, 2020, 05:03:25 AM
Use coupon code BLACK2020 on your next order to get 20-36% OFF!
November 26, 2020, 02:14:21 PM
msOS Miner Update
nbminer v33.8
gminer v2.32
srbminer-multi v0.5.7
Windows Miner Update
nbminer v33.8
gminer v2.32
srbminer-multi v0.5.7
nbminer: Added support for Octopus (NH).
gminer: Fixed stale share bug. Significant performance improvement for Ethash/Etchash algorithm on AMD cards in OC mode. Fixed "out of memory" error for Ethash on Nvidia rigs.
srbminer-multi: General improvements and small fixes.
nbminer v33.8
gminer v2.32
srbminer-multi v0.5.7
Windows Miner Update
nbminer v33.8
gminer v2.32
srbminer-multi v0.5.7
nbminer: Added support for Octopus (NH).
gminer: Fixed stale share bug. Significant performance improvement for Ethash/Etchash algorithm on AMD cards in OC mode. Fixed "out of memory" error for Ethash on Nvidia rigs.
srbminer-multi: General improvements and small fixes.
November 25, 2020, 03:11:42 PM
You can enter promo code under Referral tab on their website.
November 25, 2020, 12:46:16 PM
Will this still apply after the DAG size reduction? I would love to try the pool with this bonus...hard to do with smaller GPUs
Interesting question. Best that you head to https://t.me/ezil_me and get direct answer from them.
I dont use telegram. But i really appreciate your response...
Now to just figure out where to enter the promo code haha
November 25, 2020, 01:38:06 AM
Balance monitoring
Added CFX (Conflux) to F2Pool balance monitoring.
Added CFX (Conflux) to F2Pool balance monitoring.
November 24, 2020, 11:31:29 AM
Will this still apply after the DAG size reduction? I would love to try the pool with this bonus...hard to do with smaller GPUs
Interesting question. Best that you head to https://t.me/ezil_me and get direct answer from them.
November 24, 2020, 11:22:54 AM
Minerstat partners with Ezil.me pool and offers you a limited time bonus + 10 Gh/s to your hashrate!
Quote
How to participate:
1. If you are a GPU miner, join Ezil.me dual-mining pool with the promo code MINERSTAT
2. Stay connected to the pool for at least 7 days and get a bonus of +10 Gh/s to your hashrate for an hour! Everyone who qualifies gets a bonus regardless of your hashrate as long as you mine with Ezil. This is a limited time promotion until further notice.
In addition to that Ezil.me offers +4% to your mining profits thanks to dual-mining solution.
Grab your bonus and increase your profit now!
1. If you are a GPU miner, join Ezil.me dual-mining pool with the promo code MINERSTAT
2. Stay connected to the pool for at least 7 days and get a bonus of +10 Gh/s to your hashrate for an hour! Everyone who qualifies gets a bonus regardless of your hashrate as long as you mine with Ezil. This is a limited time promotion until further notice.
In addition to that Ezil.me offers +4% to your mining profits thanks to dual-mining solution.
Grab your bonus and increase your profit now!
Will this still apply after the DAG size reduction? I would love to try the pool with this bonus...hard to do with smaller GPUs
November 24, 2020, 10:33:03 AM
Stratu.ms (https://stratu.ms)
Updated devfee method and charting for Ethash GPU miners. Machines and stratums with above GH/s hashrate should see more consistent hashrate on pool side. To Apply new settings just restart your stratum.
Updated devfee method and charting for Ethash GPU miners. Machines and stratums with above GH/s hashrate should see more consistent hashrate on pool side. To Apply new settings just restart your stratum.
Jump to: