Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 27. (Read 167182 times)

Enjoy 15-32% OFF with coupon code JOLLY2020 🎁

msOS Update
 Updated mhelp command. More detailed and more structured now.
 New experimental command rmpci to auto-remove all audio devices and selected PCIe devices from the system.
 Support for OCTOMINER and MINERDUDE motherboard and chassis. Including updating the mini display, consumption, chassis fan control, discovery blue light, error led lights, and reboot/shutdown integration to watchdog and system scripts.
 Boot process no longer attaching to agent screen instead of showing detected GPUs and short version of mhelp. On future, msOS repacks this will be the defaulted option, currently newly flashed rigs still going to show mining until the first reboot.
 Resolved a rare issue with ClockTune and internal GPU when clocks were not applied if only one AMD GPU were available in the system.

msOS Miner Update
 gminer v2.36

Windows Miner Update
 gminer v2.36

gminer: Added support for extra nonce length up to 6 bytes for Ethash/KAWPOW algorithms (now miner will works on f2pool, miningpoolhub and other pools). Fixed a bug with stale job logic on beam and cortex (it will increase hashrate on pool side). Ethash devfee is now 0.65%.

Bulk commands

We have added Send command option to Workers list.
You can now send bulk console command (msOS and also general Linux commands) directly to multiple rigs without the need to log in to the console. This is useful for driver updates or similar actions that would otherwise require a lot of time to do it.

msOS Miner Update
 phoenix-eth v5.4c

Windows Miner Update
 phoenix-eth v5.4c

phoenix-eth: Added support for DAG epochs up to 500. Resolved a crash on Windows when using the latest Nvidia drivers 460.79 and 460.89. Added new kernels to allow mining on AMD Hawaii cards. Note that the AMD Windows drivers do not supports compute mode for Hawaii cards, therefore the hashrate will be low (14-15 MH/s with the current ETH DAG epoch). You can get the full 29-30 MH/s speed out of the Hawaii cards on Linux.

msOS Miner Update
 teamredminer v0.7.21

Windows Miner Update
 teamredminer v0.7.21

teamredminer: Improved probability for high (4078-4080MB) Ethash 4GB capped allocation. Improves situations where Ethash with capped DAG on 4GBs would crash after 5-10 mins when running at 4078-4080MB.

Eth epoch #382
 Dag size is approaching 4GB on ETH. At this moment it's 3.98GB so it's expected to see reduced hash rates (1-4%) with the current epoch even with more than 4GB VRAM GPUs.
Some miners will stop working around 25th Dec 2020 and hash rate will further be reduced. Make sure to use recently updated miners such as: teamredminer, lolminer with 4GB GPUs and nbminer, trex, phoenix-eth with above 4GB GPUs.

msOS Miner Update
 lolminer v1.17
 gminer v2.35

Windows Miner Update
 lolminer v1.17
 gminer v2.35

lolminer: Significantly reduced Ethash power draw on Navi GPUs and slightly improved performance of 6800 (XT) / 6900. Reduced number of stale shares on Cortex algorithm. Added parameter --singlethread to work with Ethash and Equihash algorithm. Several other performance improvements and bug fixes.
gminer: Removed algorithms: Eaglesong, Handshake, Kadena, BeamHashI, BeamHashII, Grimm, Cuckaroo29, Cuckaroom29, Equihash 96,5. Significantly reduced binary size. Bug fixes and other improvements.

Diagnostic
Added Driver version check under Misc. Missing/undetected drivers will show an error and how to fix it.
You have to redo the diag to get latest update.

msOS Miner Update
 nbminer v35.0

Windows Miner Update
 nbminer v35.0

nbminer: Removed limitation of not running under Virtual Machine. Added statistics for health of AMD GPUs. Reduced CPU usage.

Profit switch

Added new automated feature: Update on the go
When you enable this feature on your profit switch page then system will regularly and automatically update your hashrate and power consumption values in regard to your latest data as reported in your hashrate and power charts.

msOS Miner Update
 teamredminer v0.7.20

Windows Miner Update
 teamredminer v0.7.20

teamredminer: Added default capped DAG allocation for 4GBs at 4072MB (--eth_4g_max_alloc). Resolved an issue with crashes using --eth_dag_cache on 4GB gpus.

Triggers
Added GPU count drop trigger. Also introduced Power cycle option to use with it.

msOS Update
 Updated mrecovery/netrecovery to work better in certain regions.
 Checking host file health periodically.
 Improved method to apply ClockTune upon boot.
 New Power Cycle option to power off the rig and boot it back after 30 seconds. This can help with multi PSU setups when GPUs are not getting properly recognized by the motherboard. If action is not supported by your motherboard then the machine will just reboot.
 Resolved a bug in the agent that could cause an Idle state in poor network conditions.

Bios Flasher
 Previously you were able to download bios .rom backups from the worker's profile, but now backups can also be downloaded directly from the bios flasher page.
 Allowing to flash same BIOS without force method. (Bypassing Flash already programmed message). This reduces the risk to flash non-suitable or invalid bios. Only use force flash if you are aware of what you are doing.

msOS Miner Update
 trex 0.19.4
 gminer 2.34

Windows Miner Update
 trex 0.19.4
 gminer 2.34

trex: Miner not starting with various TREX: xxxx (base64 encoded) errors. Other Bug fixes and improvements.
gminer: Improved compatibility with Ethash pools. added DAG check after generation for Ethash and ProgPoW/KAWPOW algorithms, this feature helps to detect overclock issues. Improved compatibility with AMD GPUs under Windows, now miner display temperature and power consumption for newest AMD cards. Decreased stale share percentage on ProgPoW/KAWPOW algorithms. When DAG generation failed on some GPU client will not just stop.

Minerstat Merch
Added three new designs to our collection.
 https://minerstat.com/merch

msOS Miner Update
 phoenix-eth v5.4b
 srbminer-multi v0.5.9

Windows Miner Update
 phoenix-eth v5.4b
 srbminer-multi v0.5.9

phoenix-eth: New kernels for AMD Vega and Navi GPUs that are slightly faster when the DAG buffer is approaching or passing 4GB in size (the current ETH DAG is close to 4GB). To use these new kernels, you need to use drivers 20.5.1 or later under Win10, or 20.10.x or later under Linux. Added support for the latest AMD Windows 10 drivers 20.12.1 and 20.11.3. Other small fixes and improvements.
srbminer-multi: Fixed a bug on RandomX algorithm that could cause miners to create invalid shares for some jobs and other bug fixes.

msOS Miner Update
 trex v0.19.3

Windows Miner Update
 trex v0.19.3

trex: Performance improvements by 1-2% on some configurations and reduction of invalid shares on Octopus algorithm. Windows resolved issue with v460.79 video drivers.

NVML patcher for 460.79
 If you are mining on Windows and unlucky enough to install recent Nvidia drivers, then you want to use our simple NVML patcher. Usage is simple: Just close down every application/driver control panel that can use NVML, then run the .exe file. After that you can continue to mine with any miner without a reboot. Enjoy.

 Download: https://static-ssl.minerstat.farm/miners/windows/nvmlpatch.zip

msOS Miner Update
 nanominer v3.1.4

Windows Miner Update
 nanominer v3.1.4

nanominer: Fixed detecting 0 Nvidia devices in case NVML fails with the latest Nvidia driver. Fixed stability issue with AMD RX 5700 mining Ethash in Linux.

msOS Update
 General AMD Fan Script improvements to apply fan speed quicker on some GPUs.
 Support to set different static fan speed per GPU basis.
 Better support for GTX/RTX mixed rigs.

Bios Backup
 For AMD GPUs, you can now download current .rom file with one easy click from the hardware's table on the worker's page.

msOS Miner Update
 teamredminer v0.7.19

Windows Miner Update
 teamredminer v0.7.19

teamredminer: Ethash solo-miner share high-score list added. Ethash single buffer dag for a small power save. Only available on recent drivers and should in theory always be an improvement. Miner GPU initialization procedure got rewritten. The init procedure should now hopefully be much more stable, especially on Navis in general and even more so for 5600(XT)s. Other performance and stability improvements.

msOS Repack
v1.4 Recommended for all mining motherboards such as H110, B250, H81.
v1.6 Recommended for newer motherboards such as Z490, B550, X570.

Both images support GTX, RTX, P10X, RX400/500, VII, NAVI/5000 GPUs.

v1.6 having a much more recent kernel and more pre-installed ethernet and wifi drivers.

For working rigs no reason to reflash.

msOS Miner Update
 miniz v1.6x

Windows Miner Update
 miniz v1.6x

miniz: Up to 8% improvements depend on GPU with Equihash 144,5 algorithm.

msOS Miner Update
 nbminer v34.5

Windows Miner Update
 nbminer v34.5

nbminer: Improved Ethash hashrate by ~1% on some Nvidia GPUs. Improvements on Octopus on some 20 & 30 series Nvidia GPUs. Fixed crash on KAWPOW and progpow_sero on some AMD & Nvidia rigs.

Diagnostic
Improved GEN detection.

Stratu.ms
 Resolved charting issue with Ethash stratums when the AVG chart was half of the actual avg value. To Apply the fix just restart your stratum.

msOS Miner Update
 nanominer v3.1.3

Windows Miner Update
 nanominer v3.1.3

nanominer: Performance improvements for Octopus and Ethash algorithms on Nvidia GPUs. Ethash improvements: +1.7% on Turing (16xx, 20xx), +0.5% on Ampere (30xx). Octopus improvements: +4% on Turing (16xx, 20xx), +2% on Ampere (30xx).

Remote Console
 Improved expired session handling.

msOS Update
 AMD and Nvidia Driver Update Utility will now ask for confirmation if you are trying to update drivers manually with less than 2GB of free space.
 New Nvidia driver update parameter --silent prevents asking any question during the install.

msOS
 msOS v1.4 package got updated with the latest Nvidia 455.45.01 driver, which brings support for RTX 3060Ti.
 For working rigs no reason to reflash. However, you can update the driver manually with nvidia-update command.

msOS Update
 Updated NVFlash to support RTX 3000 Series Graphics Cards.
 New debug command mgpu will list all detected GPUs in the system.
 AMD Driver Update Utility will now ask for confirmation, if you are trying to update drivers manually with less than 8GB RAM.
 New AMD driver update parameter --silent prevents asking any question during the install.
 New AMD driver update parameter --reboot will automatically reboot the system after a successful install.
 New Nvidia driver update parameter --reboot will automatically reboot the system after a successful install.

GPU BIOS flasher
 After flashing you will find the output (if available) under Latest activity log.