The version is 3.4.1.0
that is what is displayed on the Node
https://s9.postimg.org/pqr60dva7/bug2jpg.jpg
that is what is displayed on the Node
https://s9.postimg.org/pqr60dva7/bug2jpg.jpg
update it
Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 66. (Read 167182 times)
January 10, 2018, 06:10:13 AM
update it
January 09, 2018, 09:26:41 PM
The version is 3.4.1.0
that is what is displayed on the Node
https://s9.postimg.org/pqr60dva7/bug2jpg.jpg
that is what is displayed on the Node
https://s9.postimg.org/pqr60dva7/bug2jpg.jpg
January 09, 2018, 09:12:21 PM
OK i understand now
Thank you for the clarification.
Btw
this sometimes happens to mi miner :
https://postimg.org/image/a2pytcnbf/
For some reason it restarts the miner either from short temporary loss of internet connection or for some other reason and then just stays like this until i manually click on "Click to stop", and then i restart it and it works for another period..
any thoughts ?
Nvidia gtx 1080Ti rig ..
CC-Tprouvot
Thank you for the clarification.
Btw
this sometimes happens to mi miner :
https://postimg.org/image/a2pytcnbf/
For some reason it restarts the miner either from short temporary loss of internet connection or for some other reason and then just stays like this until i manually click on "Click to stop", and then i restart it and it works for another period..
any thoughts ?
Nvidia gtx 1080Ti rig ..
CC-Tprouvot
v3.4.2 ?
January 09, 2018, 09:03:54 PM
OK i understand now
Thank you for the clarification.
Btw
this sometimes happens to mi miner :
https://postimg.org/image/a2pytcnbf/
For some reason it restarts the miner either from short temporary loss of internet connection or for some other reason and then just stays like this until i manually click on "Click to stop", and then i restart it and it works for another period..
any thoughts ?
Nvidia gtx 1080Ti rig ..
CC-Tprouvot
Thank you for the clarification.
Btw
this sometimes happens to mi miner :
https://postimg.org/image/a2pytcnbf/
For some reason it restarts the miner either from short temporary loss of internet connection or for some other reason and then just stays like this until i manually click on "Click to stop", and then i restart it and it works for another period..
any thoughts ?
Nvidia gtx 1080Ti rig ..
CC-Tprouvot
January 09, 2018, 08:45:20 PM
@coinscrow
I like the new version of Minerstat for android app, especially the dark mode
BUT i have a question ?
How do you access Minerstat functions when out in the real world, (lets say in a bar or at school/work) because the Reboot/Restart rig/miner options are only available if 2FA i enabled.
When you enable 2Fa you get to Phone Factor and when you try to login with the android app , since 2fa is enabled, the Minerstat app requires you to scan the PhoneFactor QR code.
To get the Phone Factor QR you have to be logged on desktop !!!
So how to use the android app outside if you can not 2FA it without the desktop ?
Or is it meant to be used once activated, and then left to work in the background of the phone?
I like the new version of Minerstat for android app, especially the dark mode
BUT i have a question ?
How do you access Minerstat functions when out in the real world, (lets say in a bar or at school/work) because the Reboot/Restart rig/miner options are only available if 2FA i enabled.
When you enable 2Fa you get to Phone Factor and when you try to login with the android app , since 2fa is enabled, the Minerstat app requires you to scan the PhoneFactor QR code.
To get the Phone Factor QR you have to be logged on desktop !!!
So how to use the android app outside if you can not 2FA it without the desktop ?
Or is it meant to be used once activated, and then left to work in the background of the phone?
not always need to scan the 2FA key, only once.
Once you scanned you got full access to every functions. That's all.
If you have Google Auth enabled on your account after re-login you will see "PhoneFactor" menu on the left. Scan this code, and you are in!
Also if you want to sign in to the browser, select Phonefactor login option and scan the code with your mobile (Menu > PhoneFactor)
January 09, 2018, 07:49:40 PM
@coinscrow
I like the new version of Minerstat for android app, especially the dark mode
BUT i have a question ?
How do you access Minerstat functions when out in the real world, (lets say in a bar or at school/work) because the Reboot/Restart rig/miner options are only available if 2FA i enabled.
When you enable 2Fa you get to Phone Factor and when you try to login with the android app , since 2fa is enabled, the Minerstat app requires you to scan the PhoneFactor QR code.
To get the Phone Factor QR you have to be logged on desktop !!!
So how to use the android app outside if you can not 2FA it without the desktop ?
Or is it meant to be used once activated, and then left to work in the background of the phone?
I like the new version of Minerstat for android app, especially the dark mode
BUT i have a question ?
How do you access Minerstat functions when out in the real world, (lets say in a bar or at school/work) because the Reboot/Restart rig/miner options are only available if 2FA i enabled.
When you enable 2Fa you get to Phone Factor and when you try to login with the android app , since 2fa is enabled, the Minerstat app requires you to scan the PhoneFactor QR code.
To get the Phone Factor QR you have to be logged on desktop !!!
So how to use the android app outside if you can not 2FA it without the desktop ?
Or is it meant to be used once activated, and then left to work in the background of the phone?
January 09, 2018, 04:07:42 PM
👋🏻 Welcome to Minestat 2.0.
- Improved Design ⚡️
- Dark mode 🌗
and much more waiting for you!
⬇️ iOS: https://goo.gl/kcKyTU
⬇️ Android: https://goo.gl/SLKDPs
- Improved Design ⚡️
- Dark mode 🌗
and much more waiting for you!
⬇️ iOS: https://goo.gl/kcKyTU
⬇️ Android: https://goo.gl/SLKDPs
January 05, 2018, 04:43:36 AM
what happened? is there any other active channel?
December 28, 2017, 12:01:46 AM
Thanks for your work on this project. Only problem I'm having right now is that with profit switch enabled, every time Hush is the top coin to mine with my rigs, Node will restart and the miner will close with a line that says invalid entries, then watchdog will restart the miner with blank settings for (MAIN_POOL), (MAIN_PORT), etc.
This only happens with Hush regardless of worker name, pool address, or AMD and Nvidia. Happens with both ewbf and claymore. Everything else works fine with all the settings for other coins filled out appropriately for profit switch. It switches normally between coins when Hush is disabled in the address editor.
Not sure if I'm doing anything wrong. Any help would be appreciated.
This only happens with Hush regardless of worker name, pool address, or AMD and Nvidia. Happens with both ewbf and claymore. Everything else works fine with all the settings for other coins filled out appropriately for profit switch. It switches normally between coins when Hush is disabled in the address editor.
Not sure if I'm doing anything wrong. Any help would be appreciated.
December 26, 2017, 11:58:04 PM
This is very interesting! I will have to look at it more after my vacation... so far 64 workers and managing it a bit difficult remotely. And I plan to build 300+ workers in total so finding a solution now would be good =)
December 26, 2017, 11:52:17 PM
I really hope you will add a feature that I really like about Simplemining.net - namely that I don't have to add a mining rig to the web interface - simply putting in my email address in the rig config is enough and the rig will show up on the web interface. In your case, I guess it would be the access/token. Then I can rename it on your web interface etc.
Would be nicer than having to manually add each rig as I add them.
I would also be interested in testing the minerstat OS when it is available to test.
Jim
Would be nicer than having to manually add each rig as I add them.
I would also be interested in testing the minerstat OS when it is available to test.
Jim
December 26, 2017, 10:46:01 AM
Hi,
A new user of Minerstat here.
I use the profit switch function.
The problem is when Minerstat is switching to a profitable coin it gets stuck i have to go
to the rig and manually click run before it works.
Is this normal or i made a mistake during setup.
BTW : i use the portable version 3.4.2
A new user of Minerstat here.
I use the profit switch function.
The problem is when Minerstat is switching to a profitable coin it gets stuck i have to go
to the rig and manually click run before it works.
Is this normal or i made a mistake during setup.
BTW : i use the portable version 3.4.2
December 23, 2017, 03:43:52 PM
Thanks for update.
But algo x11-gost(sib in ccminer) and SibCoin not detected at all
But algo x11-gost(sib in ccminer) and SibCoin not detected at all
December 23, 2017, 03:41:14 PM
Watchdog = Disabled.
task.conf = false.
client = 3.4.1
Still the client will restart and restart the miner randomly, i guess it thinks it lost internet connection.
Client restart every 5 minutes.
Is there a way to disable any type of restart.
I will release an update within 14 hour.
* Fixed
https://github.com/coinscrow/minerstat-windows/releases/tag/3.4.2
Confirmed, it is fixed, no restart for the past 3 hours.
Thanks a lot.
https://i.imgur.com/HulqMZj.jpg
December 23, 2017, 01:31:30 PM
Ⓜ️ Wishing you a merry Christmas!
Windows Node updated to: v3.4.2
airNode (for antminers): v0.3.4
Linux Beta: v0.3 (with hardware monitor, server side not finished yet)
Minerstat OS: Almost ready for private testing.
Windows Node updated to: v3.4.2
airNode (for antminers): v0.3.4
Linux Beta: v0.3 (with hardware monitor, server side not finished yet)
Minerstat OS: Almost ready for private testing.
December 23, 2017, 01:31:04 PM
cast-xmr webserver not responding
can this issue figure out ?
thanks
—telemetry
i think. api not started
or firewall / antivirus block the api
What can I reset api? I already close my firewall
same problem, but eth mining is well update.
thanks
add --remoteaccess
to your config
December 23, 2017, 01:23:51 PM
—telemetry
i think. api not started
or firewall / antivirus block the api
What can I reset api? I already close my firewall
same problem, but eth mining is well update.
thanks
December 23, 2017, 12:37:23 PM
cast-xmr webserver not responding
can this issue figure out ?
thanks
—telemetry
i think. api not started
or firewall / antivirus block the api
December 23, 2017, 12:34:20 PM
December 23, 2017, 10:14:44 AM
Watchdog = Disabled.
task.conf = false.
client = 3.4.1
Still the client will restart and restart the miner randomly, i guess it thinks it lost internet connection.
Client restart every 5 minutes.
Is there a way to disable any type of restart.
https://github.com/coinscrow/minerstat-windows/releases/tag/3.4.2
Jump to: