Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 70.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: notepal on November 28, 2017, 10:02:56 AM

Hi
is it there some problem today?
my minerstat will auto restart miner
the minerstat is work fine but when it restart miner, info will clean just like new open.
what's the probem like this ?
it happen very common. just reopen the miner and look fine.

the users reported some issues with watchdog if you experience issues just disable it.

notepal

newbie

Activity: 8

Merit: 0

Hi
is it there some problem today?
my minerstat will auto restart miner
the minerstat is work fine but when it restart miner, info will clean just like new open.
what's the probem like this ?
it happen very common. just reopen the miner and look fine.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Something new.
Statistics >> Global Statistics

After you first visit that page, your workers set up automatically for monitoring. :slightly_smiling_face:

The next charts come shortly.
- GPU TEMP / WORKER
- HASHRATE / COIN / WORKER

Have a nice week Grin

https://i.imgur.com/GQEoEBQ.png (if the image not loading)

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Qazo on November 26, 2017, 06:59:37 AM

price is not important now (for me personally), it would be nice to see calculation how much ella i get
maybe you can get that info mining yield from here - https://minerpool.net/

tnx

i think i found a method for it, i post it about when ready to use or you will see if you mine this coin.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: lostboynimit on November 26, 2017, 01:50:45 PM

Even after putting in my nicehash wallet address and enabling it in profit switch, I never really see my node switch ever even though nicehash wouldve been more profitable at that time. What could be causing the issue? Im using the .msi version RC2

this function will available again within 1 week.

lostboynimit

newbie

Activity: 2

Merit: 0

Even after putting in my nicehash wallet address and enabling it in profit switch, I never really see my node switch ever even though nicehash wouldve been more profitable at that time. What could be causing the issue? Im using the .msi version RC2

Qazo

full member

Activity: 211

Merit: 101

price is not important now (for me personally), it would be nice to see calculation how much ella i get
maybe you can get that info mining yield from here - https://minerpool.net/

tnx

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Qazo on November 26, 2017, 06:33:24 AM

When $ella?

[ANN] Ellaism: Ethereum network with no premine and no contentious hard forks
https://bitcointalksearch.org/topic/ann-ellaism-ethereum-network-with-no-premine-and-no-contentious-hard-forks-2168042

i can add it to detect but it has very small cap and not huge support by third parties so, revenue calcuation it will missing or delayed.

Qazo

full member

Activity: 211

Merit: 101

When $ella?

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

⭐️ Our coin support is growing!
Here are four other. 🚀🤑Ⓜ️

$BTX $BTCZ $LUX $PIRL

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Bones972 on November 25, 2017, 07:02:27 PM

Ok thanks and that is what we would use the messenger button on the dashboard for...
I could have sent this issue to you over messenger and you would have had my account info and everything you needed to see it on my end.

FYI It is showing my dual rig in the Total online, total working and Total Hashrate. Its the Rev/day Rev/week and Rev per month that are the issue

I was just trying to figure out how to quote the above post about the messenger button. I liked that feature when I was having issues before!

FIXED

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Bones972 on November 25, 2017, 07:02:27 PM

Ok thanks and that is what we would use the messenger button on the dashboard for...
I could have sent this issue to you over messenger and you would have had my account info and everything you needed to see it on my end.

FYI It is showing my dual rig in the Total online, total working and Total Hashrate. Its the Rev/day Rev/week and Rev per month that are the issue

I was just trying to figure out how to quote the above post about the messenger button. I liked that feature when I was having issues before!

i put these back and correct the revenue issue with nicehash within few hour

mobile app and anothers work un the giod way?
also the total revenue is must be correct. i can imagine detailed revenue calc issue

Bones972

full member

Activity: 198

Merit: 101

Ok thanks and that is what we would use the messenger button on the dashboard for...
I could have sent this issue to you over messenger and you would have had my account info and everything you needed to see it on my end.

FYI It is showing my dual rig in the Total online, total working and Total Hashrate. Its the Rev/day Rev/week and Rev per month that are the issue

I was just trying to figure out how to quote the above post about the messenger button. I liked that feature when I was having issues before!

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Bones972 on November 25, 2017, 06:52:08 PM

Coin profit on the web site is way off.
I have 1 Zec rig pointed to Nicehash and 1 dual mine rig with Eth going to my wallet and LBC going to Nicehash.

You combined the dual mining rig into one single rig on payout so now it doesn't show my having any rig on Eth and only the Nicehash payout.

i check on that within few hours.
if i wont find your accesskey would be good to send to me.
i pointed two my rigs to nicehash with these combination i did not experienced this issue
maybe 1-2 line mistake easily can be fixed

Bones972

full member

Activity: 198

Merit: 101

Coin profit on the web site is way off.
I have 1 Zec rig pointed to Nicehash and 1 dual mine rig with Eth going to my wallet and LBC going to Nicehash.

You combined the dual mining rig into one single rig on payout so now it doesn't show my having any rig on Eth and only the Nicehash payout.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: coinscrow on November 24, 2017, 12:29:51 PM

- Fully rewritten Dashboard backend.
More faster, more lightweight according to the cutting edge technologies.
.... That will be make possible to us to add huge coin / pool support to GPU miners within seconds! So you can guess the second point

DONE

You can except huge coin support very soon.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: killerelite on November 25, 2017, 03:54:16 AM

there used to be a message icon on the website to contact support now its gone , miss that feature

what do you think and what do you used for?

Quote from: killerelite on November 25, 2017, 03:54:16 AM

Anyways I have a rig running 1 7990 and 2 290s
I want a way that the 7990 mines music coin and the 290 mines ethereum
What I basically want is for 2 claymore bats to run
I was thinking of just running 2 nodes on single rig , It works but gives some port error

https://minerstat.com/helper/6.html

killerelite

full member

Activity: 205

Merit: 100

there used to be a message icon on the website to contact support now its gone , miss that feature
Anyways I have a rig running 1 7990 and 2 290s
I want a way that the 7990 mines music coin and the 290 mines ethereum
What I basically want is for 2 claymore bats to run
I was thinking of just running 2 nodes on single rig , It works but gives some port error

mrde12

newbie

Activity: 25

Merit: 0

Quote from: coinscrow on November 23, 2017, 11:52:29 AM

Quote from: mrde12 on November 23, 2017, 11:51:37 AM

Quote from: coinscrow on November 22, 2017, 11:26:12 AM

Quote from: suilow1991 on November 22, 2017, 11:19:48 AM

Is it normal that the launched miner will restart every few minutes and continue mining for awhile? The node seems ok. This happens when I mine with ccminer and ewbf.
It's annoying because the hashrate have to slowly build up every time the miner restart. Do take note, my rig can run these miners stably with no issue all the time without the node. Help please.

i noticed similar on one of my rigs. i run debug now, if i found something. i going to release a hotfix within 24 hour.

try to ctrl + alt + del and close the minerstat guard, hope it helps.

close the guard cant fix this issue. something wrong with the node.

watchdog off?

disable watchdog and the rig stably again

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Some changes for today:

- New main page on minerstat.com
- Dark Mode on the Dashboard (for boring nights when you tired)

- API - CPU mining

Code:

 "cpu": {
            "active": "hashing",
            "crypto": "XMR",
            "client": "xmr-stak-cpu",
            "hashrate": 268.4,
            "hashrate_unit": "H",
            "revenue_usd_day": 0.848166,
            "revenue_btc_day": 0.00010388711894822
        }

- API - Subscription

Code:

"plan": {
        "tier": 3,
        "tier_expire": "2117-07-09 15:13:43",
        "tier_expired": "no"
    },

What's next? (Not in time order)

- Fully rewritten Dashboard backend.
More faster, more lightweight according to the cutting edge technologies.
.... That will be make possible to us to add huge coin / pool support to GPU miners within seconds! So you can guess the second point Wink

- Bulk Remote Settings
Currently you can restart the node on all of your rig on the config editor, and modify client, but you can't disable watchdog on all Worker, send reboot command to a worker group.. So we make it possible!

- Linux Beta Client
You can install standalone or to your current distro with pre-installed graphics drivers and modules. That going to make possible to monitor your rigs on our system.

- Windows Node Bug Fixes
Some maintenance and improvements.

Black Friday
Our last discount for this year end by:
25/11/2017 12:00 UTC

Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 70. (Read 167182 times)