Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 87.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

In the days i'll publish a "new feature".
I remaked the old "remote control" panel.

- Now will be faster.
- Only one pin code for all of your rigs.
- Status BAR (pending command, in progress, done)
- Send command to all of your rigs (Autoupdate, restart)..

Schedule commands.. and lot more stuff Grin

Stay tuned..

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: quick1unc on August 21, 2017, 10:37:27 AM

weird it seems to be GPU 1 and 2 on all my rigs that I've updated. they keep fluctuating and running a bit slower than all the other cards.

node not effect on mining speed. quit from remote desktop.
v3.1.1 is more lightweight use less resources.
integrated ohm, proxy, webserver etc.. not run third party apps. needs to be more faster.

for me no differences between versions.

quick1unc

full member

Activity: 289

Merit: 107

weird it seems to be GPU 1 and 2 on all my rigs that I've updated. they keep fluctuating and running a bit slower than all the other cards.

quick1unc

full member

Activity: 289

Merit: 107

auto update still didn't work. Had to close 8 command line windows and just run the update.exe manually.

also mining speeds seem much more unstable now. Getting alot more bouncing around and lower speeds for hashing compared to 3.04 or whatever it was.

mrde12

newbie

Activity: 25

Merit: 0

Quote from: coinscrow on August 21, 2017, 09:42:05 AM

v3.1.1
UPDATE button removed -> New RESTART button.
- Restart whole running client, download configs, start the default client.
New Background Process for Protection.
- Re-Initalize client after (1200 * 10) rounds. (approx 4 hour) that will protect the node from UI issues and solve all crash issues what the huge buffer can cause after long running.
- Sync time reduced to 60/80 sec depend on client.

I'm sorry for the trouble. I'll extend all paid plan with +1 week.

thank for your work hard

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

v3.1.1
UPDATE button removed -> New RESTART button.
- Restart whole running client, download configs, start the default client.
New Background Process for Protection.
- Re-Initalize client after (1200 * 10) rounds. (approx 4 hour) that will protect the node from UI issues and solve all crash issues what the huge buffer can cause after long running.
- Sync time reduced to 60/80 sec depend on client.

I'm sorry for the trouble. I'll extend all paid plan with +1 week.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: mrde12 on August 21, 2017, 07:05:08 AM

3.1v9
node.exe has stopped working every 16 hours in all my rig
i just disable windows defender. pls fix it soon

I successfully fixed all issuses Grin

all node will update itself in few hours.

mrde12

newbie

Activity: 25

Merit: 0

3.1v9
node.exe has stopped working every 16 hours in all my rig
i just disable windows defender. pls fix it soon

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Few new coin support for Today.
$BCN $GAME $XZC

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: cryptofriendz on August 20, 2017, 03:51:11 PM

At a glance it looks amazing. Exactly what I was looking for. I'm testing things and if everything works out I'll purchase Tier 3. Quick feedback from playing around:

* Environment variables to use in the configs would be great [like (WORKER), (ETHWALLET), (EMAIL) etc.]
* Showing versions of miners in dashboard (ccminer-tpruvot, which version for example)
* 9 GPUs are shown in a 8 GPU rig, and there is no temp data for one of them (not a big deal, just mentioning)
* Autoconvert to BTC on exchanges would be nice, for now I integrated Cryptopia but can't Sell now (button is grey), withdraws are disabled in API

Look forward to more soon. Cheers!

Very good ideas! Thank you for your feedback.
I have few new thing on my to-do-list.

cryptofriendz

member

Activity: 111

Merit: 10

Do or do not.

At a glance it looks amazing. Exactly what I was looking for. I'm testing things and if everything works out I'll purchase Tier 3. Quick feedback from playing around:

* Environment variables to use in the configs would be great [like (WORKER), (ETHWALLET), (EMAIL) etc.]
* Showing versions of miners in dashboard (ccminer-tpruvot, which version for example)
* 9 GPUs are shown in a 8 GPU rig, and there is no temp data for one of them (not a big deal, just mentioning)
* Autoconvert to BTC on exchanges would be nice, for now I integrated Cryptopia but can't Sell now (button is grey), withdraws are disabled in API

Look forward to more soon. Cheers!

FFI2013

hero member

Activity: 906

Merit: 507

Quote from: coinscrow on August 20, 2017, 10:47:23 AM

Quote from: FFI2013 on August 20, 2017, 10:44:02 AM

Hi xmr-stak won't start so I copied the one from 3.004 into 3.1 and worked fine I think it said something about api but I'll double check it when I get home also on this same rig the node crashes every day the windows box pops up saying it can no longer run this program I have 16gb virtual memory set 16gb or ram fx-8350 so I no it has enough resources all my other rigs with 3.1 runs fine how can I look into windows and see why it crashing

I think i found the crash issue today and i put a v3.1.0.9 version.
From the 006 version had a new updater.exe what autoupdate all of your rigs will no problem in the future. (older autoupdaters only download the node.exe half and thats why the win say it can't run.

XMR-STAK-CPU need new cfg heres a working example:

Code:

"cpu_threads_conf" : 
[ 
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
],
"use_slow_memory" : "warn",
"nicehash_nonce" : false,
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",
"pool_address" : "xmr-eu.suprnova.cc:5222",
"wallet_address" : "coinscrow.1",
"pool_password" : "x",
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,
"verbose_level" : 6,
"h_print_time" : 60,
"output_file" : "",
"httpd_port" : 2222,
"prefer_ipv4" : true,
"aes_override" : false,
"daemon_mode": false,

Thanks on my way home now to fix it
Also to run two nodes do I put this in conf
node_1 WORKER - WORKERNAME1
node_2 mport.txt - WORKERNAME2
Or is that a typo and supposed to be
node_2 WORKER - workername2

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: FFI2013 on August 20, 2017, 10:44:02 AM

Hi xmr-stak won't start so I copied the one from 3.004 into 3.1 and worked fine I think it said something about api but I'll double check it when I get home also on this same rig the node crashes every day the windows box pops up saying it can no longer run this program I have 16gb virtual memory set 16gb or ram fx-8350 so I no it has enough resources all my other rigs with 3.1 runs fine how can I look into windows and see why it crashing

I think i found the crash issue today and i put a v3.1.0.9 version.
From the 006 version had a new updater.exe what autoupdate all of your rigs will no problem in the future. (older autoupdaters only download the node.exe half and thats why the win say it can't run.

XMR-STAK-CPU need new cfg heres a working example:

Code:

"cpu_threads_conf" : 
[ 
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
       { "low_power_mode" : true, "no_prefetch" : true, "affine_to_cpu" : 0 },
],
"use_slow_memory" : "warn",
"nicehash_nonce" : false,
"use_tls" : false,
"tls_secure_algo" : true,
"tls_fingerprint" : "",
"pool_address" : "xmr-eu.suprnova.cc:5222",
"wallet_address" : "coinscrow.1",
"pool_password" : "x",
"call_timeout" : 10,
"retry_time" : 10,
"giveup_limit" : 0,
"verbose_level" : 6,
"h_print_time" : 60,
"output_file" : "",
"httpd_port" : 2222,
"prefer_ipv4" : true,
"aes_override" : false,
"daemon_mode": false,

FFI2013

hero member

Activity: 906

Merit: 507

Hi xmr-stak won't start so I copied the one from 3.004 into 3.1 and worked fine I think it said something about api but I'll double check it when I get home also on this same rig the node crashes every day the windows box pops up saying it can no longer run this program I have 16gb virtual memory set 16gb or ram fx-8350 so I no it has enough resources all my other rigs with 3.1 runs fine how can I look into windows and see why it crashing

Destro15

newbie

Activity: 6

Merit: 0

Quote from: coinscrow on August 20, 2017, 01:58:04 AM

Quote from: Destro15 on August 20, 2017, 01:53:05 AM

Quote from: coinscrow on August 20, 2017, 01:31:30 AM

Quote from: mrde12 on August 20, 2017, 01:06:46 AM

3.1v8
node.exe has stopped working every 13 hours in all my rig

yes me too, error.log if you tell you Timeout, it was the same

Quote from: Destro15 on August 19, 2017, 06:41:05 PM

Quote from: coinscrow on August 19, 2017, 10:11:21 AM

Quote from: mrde12 on August 19, 2017, 10:01:53 AM

i try to reset client and node updating...

008 Update:

- XMR-STAK-CPU miner fee removed. 0% from now. (original devfee was 2%)
- Ethminer client support has been added: We forked the Original Ethminer.. stratum/farm API has been added to the code, now the ethminer can sync with minerstat.com, [NO! devfee included]
- Stability improvements

https://i.imgur.com/D6SbusS.jpg

I'd like to use the Ethminer, but it does not seem to recognize AMD cards using the new Blockchain driver from AMD. Do you have any workaround or fix for this?

https://1drv.ms/i/s!Ao4N7O_zJuTAkZEKvxpVlIk0XxvWcg
https://1drv.ms/i/s!Ao4N7O_zJuTAkZEJ6pI6e0NsBBnGhw

if you have AMD (OPEN CL) why you running with CUDA?

delete the -U command or siwtch it to -G

I deleted the -U already. It just crashes. I have also tried it with the -G. It doesn't crash with the -G but does not mine with the Open Cl cards either. Here is my config:

@echo off
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
powershell ./ethminer.exe -v 3 -G -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O 0x243A6BdC00000420DcB6d6870000836bdFA69A2.(WORKER)

Maybe you can tell me what I have done wrong. When I switch to Claymore Dual. Everything works fine.

Disable your integrated graphics (Intel HD) that can cause troubles.
- pull out the cable from the motherboard
- disable Multi-GPU in bios -> you must use only the PCI-E cards.
- if needed put 1 cable to one of your cards, or a dummy plug.

will definitely works! the image tell me the program found an OpenCL device, your processor, of course it crashes on daggerhashimoto (ETH)

Thank you. The issue is related to the integrated graphics.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

I just pushed an another patch.

Code:

- Wait for internet connection
- Wait for minerstat connection
- If connection lost wait for connection again
- Major bug fixes maybe prevent random crashes (high buffer)

If your client still not updated it will on the next node start.

** Tutorial video for beginners: https://www.youtube.com/watch?v=jXGJ0MicSsM

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: Destro15 on August 20, 2017, 01:53:05 AM

Quote from: coinscrow on August 20, 2017, 01:31:30 AM

Quote from: mrde12 on August 20, 2017, 01:06:46 AM

3.1v8
node.exe has stopped working every 13 hours in all my rig

yes me too, error.log if you tell you Timeout, it was the same

Quote from: Destro15 on August 19, 2017, 06:41:05 PM

Quote from: coinscrow on August 19, 2017, 10:11:21 AM

Quote from: mrde12 on August 19, 2017, 10:01:53 AM

i try to reset client and node updating...

008 Update:

- XMR-STAK-CPU miner fee removed. 0% from now. (original devfee was 2%)
- Ethminer client support has been added: We forked the Original Ethminer.. stratum/farm API has been added to the code, now the ethminer can sync with minerstat.com, [NO! devfee included]
- Stability improvements

I'd like to use the Ethminer, but it does not seem to recognize AMD cards using the new Blockchain driver from AMD. Do you have any workaround or fix for this?

if you have AMD (OPEN CL) why you running with CUDA?

delete the -U command or siwtch it to -G

I deleted the -U already. It just crashes. I have also tried it with the -G. It doesn't crash with the -G but does not mine with the Open Cl cards either. Here is my config:

@echo off
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
powershell ./ethminer.exe -v 3 -G -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O 0x243A6BdC00000420DcB6d6870000836bdFA69A2.(WORKER)

Maybe you can tell me what I have done wrong. When I switch to Claymore Dual. Everything works fine.

Disable your integrated graphics (Intel HD) that can cause troubles.
- pull out the cable from the motherboard
- disable Multi-GPU in bios -> you must use only the PCI-E cards.
- if needed put 1 cable to one of your cards, or a dummy plug.

will definitely works! the image tell me the program found an OpenCL device, your processor, of course it crashes on daggerhashimoto (ETH)

Destro15

newbie

Activity: 6

Merit: 0

Quote from: coinscrow on August 20, 2017, 01:31:30 AM

Quote from: mrde12 on August 20, 2017, 01:06:46 AM

3.1v8
node.exe has stopped working every 13 hours in all my rig

yes me too, error.log if you tell you Timeout, it was the same

Quote from: Destro15 on August 19, 2017, 06:41:05 PM

Quote from: coinscrow on August 19, 2017, 10:11:21 AM

Quote from: mrde12 on August 19, 2017, 10:01:53 AM

i try to reset client and node updating...

008 Update:

- XMR-STAK-CPU miner fee removed. 0% from now. (original devfee was 2%)
- Ethminer client support has been added: We forked the Original Ethminer.. stratum/farm API has been added to the code, now the ethminer can sync with minerstat.com, [NO! devfee included]
- Stability improvements

https://i.imgur.com/D6SbusS.jpg

I'd like to use the Ethminer, but it does not seem to recognize AMD cards using the new Blockchain driver from AMD. Do you have any workaround or fix for this?

https://1drv.ms/i/s!Ao4N7O_zJuTAkZEKvxpVlIk0XxvWcg
https://1drv.ms/i/s!Ao4N7O_zJuTAkZEJ6pI6e0NsBBnGhw

if you have AMD (OPEN CL) why you running with CUDA?

delete the -U command or siwtch it to -G

I deleted the -U already. It just crashes. I have also tried it with the -G. It doesn't crash with the -G but does not mine with the Open Cl cards either. Here is my config:

@echo off
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
powershell ./ethminer.exe -v 3 -G -S eu1.ethermine.org:4444 -FS us1.ethermine.org:4444 -O 0x243A6BdC00000420DcB6d6870000836bdFA69A2.(WORKER)

Maybe you can tell me what I have done wrong. When I switch to Claymore Dual. Everything works fine.

coinscrow

sr. member

Activity: 1596

Merit: 305

minerstat CEO

Quote from: mrde12 on August 20, 2017, 01:06:46 AM

3.1v8
node.exe has stopped working every 13 hours in all my rig

yes me too, error.log if you tell you Timeout, it was the same

Quote from: Destro15 on August 19, 2017, 06:41:05 PM

Quote from: coinscrow on August 19, 2017, 10:11:21 AM

Quote from: mrde12 on August 19, 2017, 10:01:53 AM

i try to reset client and node updating...

008 Update:

- XMR-STAK-CPU miner fee removed. 0% from now. (original devfee was 2%)
- Ethminer client support has been added: We forked the Original Ethminer.. stratum/farm API has been added to the code, now the ethminer can sync with minerstat.com, [NO! devfee included]
- Stability improvements

I'd like to use the Ethminer, but it does not seem to recognize AMD cards using the new Blockchain driver from AMD. Do you have any workaround or fix for this?

if you have AMD (OPEN CL) why you running with CUDA?

delete the -U command or siwtch it to -G

mrde12

newbie

Activity: 25

Merit: 0

3.1v8
node.exe has stopped working every 13 hours in all my rig

Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 87. (Read 167182 times)