Algorithm Settings -> Most profitable coin -> All workers, Select this view option CLICK
CSRF Missing
Topic: Ⓜ️ minerstat - mining monitor and management (mining OS, Windows, ASIC) - page 91. (Read 167182 times)
August 06, 2017, 02:22:01 PM
August 06, 2017, 01:25:12 PM
Of course online. I did just like that and it's ok.
thanks
thanks
August 06, 2017, 01:12:55 PM
Just worker - so what should I do? Use config editor?
I also found a bug (or just didn't read all things.
I added my ZEC address in pool setings.
After that I run two rigs, but lost updates of hashes on flypool. So I checked config editor. An ther is address showed as example. Also this address is seen on "Algo/Pool/Wallet/Coin editor".
I changed that on my address.
I hecked bat files, so it should work. But all addresses hould be empty, because I even didn't know that I was digging not for me.
I think there should be option in rigs panel in dashboard that shows, what really is in bat files.
I also found a bug (or just didn't read all things.
I added my ZEC address in pool setings.
After that I run two rigs, but lost updates of hashes on flypool. So I checked config editor. An ther is address showed as example. Also this address is seen on "Algo/Pool/Wallet/Coin editor".
I changed that on my address.
I hecked bat files, so it should work. But all addresses hould be empty, because I even didn't know that I was digging not for me.
I think there should be option in rigs panel in dashboard that shows, what really is in bat files.
no offline edit.
bat file always contains what you put on the config editor online.
you need to change online after node reset you will ise the latest configs what you saved.
address editor only for algo mining
August 06, 2017, 01:08:44 PM
Just worker - so what should I do? Use config editor?
I also found a bug (or just didn't read all things.
I added my ZEC address in pool setings.
After that I run two rigs, but lost updates of hashes on flypool. So I checked config editor. An there is address showed as example. Also this address is seen on "Algo/Pool/Wallet/Coin editor".
I changed that onto my address.
I hecked bat files, so it should work. But all addresses should be empty, because I even didn't know that I was digging not for me.
I think there should be option in rigs panel in dashboard that shows, what really is in bat files.
I also found a bug (or just didn't read all things.
I added my ZEC address in pool setings.
After that I run two rigs, but lost updates of hashes on flypool. So I checked config editor. An there is address showed as example. Also this address is seen on "Algo/Pool/Wallet/Coin editor".
I changed that onto my address.
I hecked bat files, so it should work. But all addresses should be empty, because I even didn't know that I was digging not for me.
I think there should be option in rigs panel in dashboard that shows, what really is in bat files.
August 06, 2017, 12:11:30 PM
How can I add and config Dwarfpool and use EXP (Expanse) coin?
There is no Dwarfpool (EXP) in pool settings.
There is no Dwarfpool (EXP) in pool settings.
dwarfpool doesn't support mining apis.
i contacted 2 times with the dwarf admin about 3 months ago, he said it comes soon
but he didnt maked it.
so no option for monitoring revenue with their api just worker
*** UPDATE: Revenue chart ZERO (0) Values fixed
August 06, 2017, 12:08:05 PM
How can I add and config Dwarfpool and use EXP (Expanse) coin?
There is no Dwarfpool (EXP) in pool settings.
There is no Dwarfpool (EXP) in pool settings.
August 06, 2017, 11:10:01 AM
ok.
login / register fixed. (i needed to tweak the sql)
algo / config file downloads now not just a single line.
login / register fixed. (i needed to tweak the sql)
algo / config file downloads now not just a single line.
August 06, 2017, 10:35:45 AM
Thanks 
I'm in
I'm in
August 06, 2017, 10:25:33 AM
Hello - I have problem with register.
I use this link https://minerstat.com/auth.html
After weryfying, I'm not a robot I click "Give me new access key"
I get the access key - three letters, three digits, fe. aaA111.
After click "log in" I have message - "This access key does not exits."
plz help
I use this link https://minerstat.com/auth.html
After weryfying, I'm not a robot I click "Give me new access key"
I get the access key - three letters, three digits, fe. aaA111.
After click "log in" I have message - "This access key does not exits."
plz help
ok fixed.
i'm fixing the another issues now, i will post it about.
August 06, 2017, 08:59:33 AM
Chart double bug fixed.
Known issues:
- Registration not work
- Algo not generating working config file
due im in vacation i can fix it within few hours when i get back to the hotel.
i will post when its ready to use again.
Known issues:
- Registration not work
- Algo not generating working config file
due im in vacation i can fix it within few hours when i get back to the hotel.
i will post when its ready to use again.
August 06, 2017, 07:02:26 AM
Hello - I have problem with register.
I use this link https://minerstat.com/auth.html
After weryfying, I'm not a robot I click "Give me new access key"
I get the access key - three letters, three digits, fe. aaA111.
After click "log in" I have message - "This access key does not exits."
plz help
I use this link https://minerstat.com/auth.html
After weryfying, I'm not a robot I click "Give me new access key"
I get the access key - three letters, three digits, fe. aaA111.
After click "log in" I have message - "This access key does not exits."
plz help
August 05, 2017, 04:28:06 AM
I wanted to report back that it looks like the latest update is running way smoother. Thanks for it
edit:
Does anyone use CPU mining too? I got this from the readme:
It says it will mine with the CPU too but it is not starting. Anyone knows how to get this going?
edit:
Does anyone use CPU mining too? I got this from the readme:
Code:
Edit cpuminer-multi config file on the website to your algo/pool/address. And the node start CPU mining too.
If you want to donate me with "Dev Fee", just enable CPU mining and do not edit the config file online. Thank you!
It says it will mine with the CPU too but it is not starting. Anyone knows how to get this going?
i just working on the new FAQ. but i will write here how to use.
Looking forward to it..
Can you take a look at the "UPTIME / HASHRATE / WORKER" chart? It shows every rig twice. Same for the "REVENUE / HOUR / WORKER" chart
August 03, 2017, 11:18:27 AM
after last update view console works not properly
https://ibb.co/hScYCF
https://ibb.co/hScYCF
August 03, 2017, 08:28:44 AM
Is there any function planned, where i can switch the miner which is mining ? So i can change to the profitablest mining ?
Thank you
If you are referring to, while it's running connect to it and tell it to start a different miner, then the functionality is already there. On the webpage under the worker you want to switch, click the monitor icon and there is remote control options. Give it a pin and then you can change miner to which one you want. Then restart the miner and wait for it to check in. It works pretty well, just make sure your config online is set before switching coins/miner. Thank you
August 03, 2017, 03:48:40 AM
Is there any function planned, where i can switch the miner which is mining ? So i can change to the profitablest mining ?
Thank you
Thank you
August 02, 2017, 11:57:24 AM
It might be helpful to provide more information like what is the error or maybe even a screenshot.
Updated node and now getting error. Node has stopped working.
delete config_backup.txt
August 02, 2017, 11:51:40 AM
It might be helpful to provide more information like what is the error or maybe even a screenshot.
Updated node and now getting error. Node has stopped working.
delete config_backup.txt
August 02, 2017, 11:51:27 AM
Updated node and now getting error. Node has stopped working.
https://gyazo.com/f9eee6e7ded17392ec535643f3bc11ac August 02, 2017, 11:42:55 AM
It might be helpful to provide more information like what is the error or maybe even a screenshot.
Updated node and now getting error. Node has stopped working.
August 02, 2017, 11:35:38 AM
Updated node and now getting error. Node has stopped working.
Jump to: