Need help:
Rig has been running for like a month no issues, got this https://ibb.co/i85CWR error 2 days ago.. system will restart and go into Linux but won't pass the login screen, inserted minrr1 password, it works, doesn't say password is wrong but won't load it up.. fine, I reinstalled a fresh copy of nvoc on the hard drive and it worked for 24 hours and now I'm getting the same exact message and Won't go pass the login screen
https://ibb.co/i85CWR
Topic: [ mining os ] nvoc - page 168. (Read 418546 times)
Vi is the best and powerfull text editor that i 'd never seen. Notepad++ is a beautiful toy for a windowsian, but never, never powerful as vi
:-)
:-)
Agreed. Regex is right there. I have been using vim as of late for syntax highlighting but I have to install it myself:
sudu apt-get install vim -y
It would be nice if @fullzero could include it in v. 20.
How long 'til v20 btw?
fullzero perhaps working on a stable version, it may take a little longer because there are many requests need to be added (probably BTG as well). But we are not missing much when you see the 1.3 version.
Coming to all the updates, guys make sure you only have the 'stable' updates option setup on your 1bash, don't just go for every update because most of the sub level updates are 'beta', wait until they are tested by our community (fullzero can't test, its highly impossible to test those)
If you don't know much about linux or what's going on, let the RIG run on its current version and wait for the stable updates.
Vi is the best and powerfull text editor that i 'd never seen. Notepad++ is a beautiful toy for a windowsian, but never, never powerful as vi
:-)
:-)
Agreed. Regex is right there. I have been using vim as of late for syntax highlighting but I have to install it myself:
sudu apt-get install vim -y
It would be nice if @fullzero could include it in v. 20.
How long 'til v20 btw?
Vi is the best and powerfull text editor that i 'd never seen. Notepad++ is a beautiful toy for a windowsian, but never, never powerful as vi
:-)
:-)
Agreed. Regex is right there. I have been using vim as of late for syntax highlighting but I have to install it myself:
sudu apt-get install vim -y
It would be nice if @fullzero could include it in v. 20.
full member
Activity: 340
Merit: 103
It is easier to break an atom than partialities AE
How do I enable root access (miner1) in linux? I would like to troubleshoot by editing 1bash without returning to windows.
My error is line 137: 1861 terminated bash '/home/m1/3main'
My error is line 137: 1861 terminated bash '/home/m1/3main'
There is no need to enable anything. Just ssh to your host and login with user m1 password miner1. This will drop you right into directory /home/m1 where 1bash lives. You can then edit with your favorite editor - e.g., vi 1bash.
Code:
nano 1bash
Yes, but, in the same time, they need to learn tu use nano... So, i think, it is better to learn vi now without waiting or facility because vi text editor is installed on any UNIX/ LINUX system. vim is more confortable, but not installed everywhere as vi.
Basis editings and utilizations are easy to use and undertsand for everyone. it's just confusing the first time because all you need is a keybord and not any mouses.
Vi is the best and powerfull text editor that i 'd never seen. Notepad++ is a beautiful toy for a windowsian, but never, never powerful as vi
:-)
Have a look at page 245 and 246
Should be the interrupted Nvidia driver upgrade problem
Should be the interrupted Nvidia driver upgrade problem
Thanks for quick response, it works!
Max GPUs i have in one rig is 13. In case this doesn't help we need to see nvidia-xconfig output and xorg.conf that it makes, so we can try to find what's wrong.
Also you can try to reflash the latest version of nvOC to usb stick, edit 1bash at windows partition (don't forget to enable headless mode) and make the first boot from usb stick without monitor attached. After the first boot in headless mode you need to wait for autoconfiguration and auto reboot. Then use network scanner or see DHCP leases on the server side to find the IP of your rig (in most cases it will be the same as in previous attempts), ssh to it and see if xorg was correctly configured.
Thank you very much for your help!
My rig is now running with all those settings: New USB, Headless, no monitor attached, know IP, have SSH and mining. Here's the weird thing: See below for my current xorg.conf that is running and I'm getting all 19 GPUs mining but only the 1st one is OC'd. What's weird about it is that:
When I run
Code:
sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration
Bus IDs lose the "@" symbol, and mining does not work.
Any ideas why some BusIDs use the @ while most I've seen don't, and why this seems to be allowing mining to run?
Also weird is that if you notice, there are only BusIDs for 0-3 (4 and 5 are missing), then it continues from 6-11 and that's it.
What are your thoughts on this?
Current xorg.conf:
Code:
Section "ServerLayout"
Identifier "layout"
Screen 0 "nvidia"
Inactive "intel"
EndSection
Section "Device"
Identifier "intel"
Driver "modesetting"
BusID "PCI:0@0:2:0"
Option "AccelMethod" "None"
EndSection
Section "Screen"
Identifier "intel"
Device "intel"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:1@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:2@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:3@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:6@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:7@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:8@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:9@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:10@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
Section "Device"
Identifier "nvidia"
Driver "nvidia"
BusID "PCI:11@0:0:0"
Option "ConstrainCursor" "off"
EndSection
Section "Screen"
Identifier "nvidia"
Device "nvidia"
Option "AllowEmptyInitialConfiguration" "on"
Option "IgnoreDisplayDevices" "CRT"
EndSection
current lspci:
Code:
00:00.0 Host bridge: Intel Corporation Sky Lake Host Bridge/DRAM
00:01.0 PCI bridge: Intel Corporation Sky Lake PCIe Controller (
00:02.0 VGA compatible controller: Intel Corporation Device 1902
00:14.0 USB controller: Intel Corporation Device a2af
00:16.0 Communication controller: Intel Corporation Device a2ba
00:1b.0 PCI bridge: Intel Corporation Device a2eb (rev f0)
00:1b.5 PCI bridge: Intel Corporation Device a2ec (rev f0)
00:1b.6 PCI bridge: Intel Corporation Device a2ed (rev f0)
00:1b.7 PCI bridge: Intel Corporation Device a2ee (rev f0)
00:1c.0 PCI bridge: Intel Corporation Device a294 (rev f0)
00:1c.5 PCI bridge: Intel Corporation Device a295 (rev f0)
00:1c.6 PCI bridge: Intel Corporation Device a296 (rev f0)
00:1c.7 PCI bridge: Intel Corporation Device a297 (rev f0)
00:1d.0 PCI bridge: Intel Corporation Device a298 (rev f0)
00:1d.1 PCI bridge: Intel Corporation Device a299 (rev f0)
00:1d.2 PCI bridge: Intel Corporation Device a29a (rev f0)
00:1d.3 PCI bridge: Intel Corporation Device a29b (rev f0)
00:1f.0 ISA bridge: Intel Corporation Device a2c8
00:1f.2 Memory controller: Intel Corporation Device a2a1
00:1f.4 SMBus: Intel Corporation Device a2a3
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connecti
01:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
02:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
03:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
04:00.0 PCI bridge: ASMedia Technology Inc. Device 1187
05:01.0 PCI bridge: ASMedia Technology Inc. Device 1187
05:02.0 PCI bridge: ASMedia Technology Inc. Device 1187
05:03.0 PCI bridge: ASMedia Technology Inc. Device 1187
05:04.0 PCI bridge: ASMedia Technology Inc. Device 1187
05:05.0 PCI bridge: ASMedia Technology Inc. Device 1187
05:06.0 PCI bridge: ASMedia Technology Inc. Device 1187
05:07.0 PCI bridge: ASMedia Technology Inc. Device 1187
06:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
07:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
08:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
09:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
0a:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
0b:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
0c:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
0d:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
0e:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
0f:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
10:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
11:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
12:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
13:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
14:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
15:00.0 3D controller: NVIDIA Corporation Device 1c07 (rev a1)
Pretty sure this is something really simple...but I can't get a login to the desktop 
I get a prompt with either m1 or Guest session and the password miner1 doesn't work for me at all.
It seems to take it but just jumps back to the login screen again
I get a prompt with either m1 or Guest session and the password miner1 doesn't work for me at all.
It seems to take it but just jumps back to the login screen again
I have very same issue on 2 rigs. They both worked. Then suddenly my pool reported they stopped mining (maybe there was some reboot but I dont know). I connect to them via TeamViewer through unattended access that was setup earlier. TeamViewer works and shows this login screen. Either reboot from this screen or power-off-power-on gives the same result. System boots into this non-loginable login screen.
One rig is 7x1070 evga on asus z270-a, usb3 stick, it worked flawlesly for maybe 10 days.
Another rig is on gigabyte 970 ud3, hdd - also worked for several days after last OC tuning. I've reinstalled system yesterday to fix this but it appeared in less than a day again. Is there some resolution?
I'm running without monitor, build v0019 on both. Will try to update to latest v0019-1.3.
BTW Crtl+Alt+F1 doesn't work - doesn't show terminal through TW
Have a look at page 245 and 246
Should be the interrupted Nvidia driver upgrade problem
Pretty sure this is something really simple...but I can't get a login to the desktop
I get a prompt with either m1 or Guest session and the password miner1 doesn't work for me at all.
It seems to take it but just jumps back to the login screen again
https://i.imgur.com/VfFlm8I.png
I get a prompt with either m1 or Guest session and the password miner1 doesn't work for me at all.
It seems to take it but just jumps back to the login screen again
https://i.imgur.com/VfFlm8I.png
I have very same issue on 2 rigs. They both worked. Then suddenly my pool reported they stopped mining (maybe there was some reboot but I dont know). I connect to them via TeamViewer through unattended access that was setup earlier. TeamViewer works and shows this login screen. Either reboot from this screen or power-off-power-on gives the same result. System boots into this non-loginable login screen.
One rig is 7x1070 evga on asus z270-a, usb3 stick, it worked flawlesly for maybe 10 days.
Another rig is on gigabyte 970 ud3, hdd - also worked for several days after last OC tuning. I've reinstalled system yesterday to fix this but it appeared in less than a day again. Is there some resolution?
I'm running without monitor, build v0019 on both. Will try to update to latest v0019-1.3.
Update:
Crtl+Alt+F1 shows terminal but it needs to reconnect TeamViewer to see this. Logged in in terminal, rebooted with 'reboot' command but it shows same login screen
. Will try to update packages as it suggest after the login.
Hello!
What is the algorithm now when using P106 (Mining Editon) cards?
What is the correct sequence:
I downloaded a clean system. Connect the monitor to the integrated graphics. In the settings, 1bash enabled P106_100_FULL_HEADLESS_MODE = "YES"
Then he started the miner, waited until he formed a new Xorg. Then reboot, and I go on SSH.
Next, I try to run the bash 2unix minor, it again tries to form a new xorg and starts the mining process, but without overclocking. Then reboot and everything works well.
But now, something this does not work
I have a question would it be possible to add one BTC address for nicehash and one for others like zpool and miningpoolhub the reason if you use the nicehash in-house address assigned to you account the fee is smaller than use my regular address for the rest
You can, you have to add something like
BTC_ADDRESS2=""
Put second BTC address in ""
You have to modify 3main to add this variable where you want to use this one.
I have a question would it be possible to add one BTC address for nicehash and one for others like zpool and miningpoolhub the reason if you use the nicehash in-house address assigned to you account the fee is smaller than use my regular address for the rest
the TG bot is receiving data from NVOC but it doesn't look like it's getting everything.
it only shows gpu utilizations, temps, and pd. i tried to add but didn't work - though CURRENTHASH: did come up on the TG feed, just without any values
i'm not a programmer though, just making a guess about how to get it to work
edit: played around a bit more - it looks like currenthash either isn't pulling any data or isn't forwarding it to TG. is there a fix for this?
it only shows gpu utilizations, temps, and pd. i tried to add
Code:
CURRENTHASH: $CURRENTHASH
i'm not a programmer though, just making a guess about how to get it to work
edit: played around a bit more - it looks like currenthash either isn't pulling any data or isn't forwarding it to TG. is there a fix for this?
https://i.imgur.com/A6z4wuM.png
click link if image is too big https://i.imgur.com/A6z4wuM.png
This is all invidivual workers
Anybody got possible explinations for the inconsistency?
click link if image is too big https://i.imgur.com/A6z4wuM.png
This is all invidivual workers
Anybody got possible explinations for the inconsistency?
Hi fullzero, Hi Guys,
(Long time i was in r/o mode. This is my first post.)
What you think about implementing into NVOC nvidia-docker and run miner for each isolated GPU in docker container?
It will be more fail-safe for rig with many GPU`s, more flexible to individual OC and give a way to launch several different miners.
for example: One of my rig have 13 GPU different models => OC settings are different for each others.
If one GPU crash then crash all GPU`s and whatchdog restart miner. In my case restartin 3main takes wery long time, actually wery much time takes running nvidia-settings.
I was forced to set in sleep timeout in wdog equal to 120s otherwise i have loop when wdog restarts 3mian.
p.s. exuse me for poor english
(Long time i was in r/o mode. This is my first post.)
What you think about implementing into NVOC nvidia-docker and run miner for each isolated GPU in docker container?
It will be more fail-safe for rig with many GPU`s, more flexible to individual OC and give a way to launch several different miners.
for example: One of my rig have 13 GPU different models => OC settings are different for each others.
If one GPU crash then crash all GPU`s and whatchdog restart miner. In my case restartin 3main takes wery long time, actually wery much time takes running nvidia-settings.
I was forced to set in sleep timeout in wdog equal to 120s otherwise i have loop when wdog restarts 3mian.
p.s. exuse me for poor english
Hi,
I need some support.
I have installed nvoc 0019 in my two rigs:
motherboard: ASUS B250 MIning
Videos: ASUS 106-100 mining edition.
I have disabled IAmNotAJeep_and_Maxximus007_WATCHDOG="NO", because miner is restarting periodically.
In first RIG In temp Screen I have following errors for all GPUs:
ERROR: The GPU has fallen off the bus or has otherwise become inaccessible
ERROR: Error assigning value 57 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:13]) as specified in assignment '[fan:13]/GPUTargetFanSpeed=57' (Unknown Error).
------------------------
IN Second in temp Screen the following:
ERROR: Error assigning value 52 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:7]) as specified in assignment '[fan:7]/GPUTargetFanSpeed=52' (Unknown Error).
GPU 8, Target temp: 70, Current: 46, Diff: 24, Fan: 51, Power: 99.41
Sun Oct 22 00:35:58 EDT 2017 - Adjusting Fan for gpu:8. Old: 51 New: 46 Temp: 46
------------------------------
Please help, What I'm doing wrong or what is missing in my config.
I need some support.
I have installed nvoc 0019 in my two rigs:
motherboard: ASUS B250 MIning
Videos: ASUS 106-100 mining edition.
I have disabled IAmNotAJeep_and_Maxximus007_WATCHDOG="NO", because miner is restarting periodically.
In first RIG In temp Screen I have following errors for all GPUs:
ERROR: The GPU has fallen off the bus or has otherwise become inaccessible
ERROR: Error assigning value 57 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:13]) as specified in assignment '[fan:13]/GPUTargetFanSpeed=57' (Unknown Error).
------------------------
IN Second in temp Screen the following:
ERROR: Error assigning value 52 to attribute 'GPUTargetFanSpeed' (m1-desktop:0[fan:7]) as specified in assignment '[fan:7]/GPUTargetFanSpeed=52' (Unknown Error).
GPU 8, Target temp: 70, Current: 46, Diff: 24, Fan: 51, Power: 99.41
Sun Oct 22 00:35:58 EDT 2017 - Adjusting Fan for gpu:8. Old: 51 New: 46 Temp: 46
------------------------------
Please help, What I'm doing wrong or what is missing in my config.
are you using:
Code:
P106_100_FULL_HEADLESS_MODE="YES"
?
My configuration was set to "NO".
I changed on one rig to "YES" and getting this error in the "temp" screen:
----------------
Mon Oct 23 01:24:05 EDT 2017 - Adjusting Fan for gpu:8. Old: 50 New: 45 Temp: 46
Failed to connect to Mir: Failed to connect to server socket: No such file or directory
Unable to init server: Could not connect: Connection refused
ERROR: The control display is undefined; please run `nvidia-settings --help` for usage information.
Mon Oct 23 01:24:05 EDT 2017 - All good, will check again soon
----------
Also there was an error related to "persistence mode". I have enabled it manually for all GPUs.
Please Help!
Hi fullzero, Guys,
I have digged and try lot of things.
Unfortunately, without good results.
Now, I'm sure that very small thing I have missed and that's killing me.
What is I'm doing wrong?? Please support.
Don't worry about persistence mode, it's not fatal, just ignore that message.
Not many of us have those P106 cards to help troubleshoot. Hopefuly someone that has them and have a working setup can help you.
Your problem might be related to your motherboard. Apperantly there is known problem where motherboard doesn't work well with more than 12 or was it 13 GPU's. Asus is aware of the problem and they intend to fix it with new bios update. Check if they released new bios.
Thx for your soon feedback. I'll check the bios update.
Hope someone can help!!
Hi fullzero, Hi Guys,
I've found the solution. Also, I have changed to "YES" the IAmNotAJeep_and_Maxximus007_WATCHDOG. It's working fine around one hour. I'll monitor and let you know, if something new will come up.
Below is the steps:
1. Changes in 1bash:
LOCALorREMOTE="REMOTE"
SSH="YES"
P106_100_FULL_HEADLESS_MODE="NO"
2. Reboot
NO Monitors starting from now!!!
3.
sudo -i
rm /etc/X11/xorg.conf
nvidia-xconfig -a --allow-empty-initial-configuration --cool-bits=28 --use-display-device="DFP-0" --connected-monitor="DFP-0"
reboot
4. Change in 1bash:
__CORE_OVERCLOCK=100
MEMORY_OVERCLOCK=500 (getting 22 Mh/s)
Need to check in process tab. for all GPU's should be exists "Xorg - /usr/lib/xorg/Xorg"
-------------
m1@miner1:~$ nvidia-smi
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 1073 G /usr/lib/xorg/Xorg 30MiB |
| 0 1646 G compiz 11MiB |
| 0 6160 C /home/m1/eth/Genoil-U/ethminer 2253MiB |
| 1 1073 G /usr/lib/xorg/Xorg 7MiB |
| 1 6160 C /home/m1/eth/Genoil-U/ethminer 2253MiB |
| 2 1073 G /usr/lib/xorg/Xorg 7MiB |
| 2 6160 C /home/m1/eth/Genoil-U/ethminer 2253MiB |
| 3 1073 G /usr/lib/xorg/Xorg 7MiB |
| 3 6160 C /home/m1/eth/Genoil-U/ethminer 2253MiB |
-----------------------------------------------------
Hope this will help also to others.
Hi! According to the same issue with all my P106-100 rigs, i suppose you need to do this:
1) check that you have set P106_100_FULL_HEADLESS_MODE="YES" in 1bash
2) check that you can control your rig without monitor attached (SSH or Teamviewer enabled)
3) disconnect monitor
4) run the following:
Code:
sudo nvidia-xconfig -a --cool-bits=28 --allow-empty-initial-configuration
sudo reboot
After the rig reboots, overclocking will work as supposed to. Sometimes i had to do number 4 again after reboot to make it working.
Thanks, trying now. Did you have more than 16 GPUs?
(edit)I tried this and mining would not start. Had to do
Code:
sudo mv /etc/X11/xorg.conf.nvidia.backup /etc/X11/xorg.conf
I've read that you can add the coolbits part to either screen or device; the code you gave me I think put it in whichever was the wrong one.
Any other ideas?
Max GPUs i have in one rig is 13. In case this doesn't help we need to see nvidia-xconfig output and xorg.conf that it makes, so we can try to find what's wrong.
Also you can try to reflash the latest version of nvOC to usb stick, edit 1bash at windows partition (don't forget to enable headless mode) and make the first boot from usb stick without monitor attached. After the first boot in headless mode you need to wait for autoconfiguration and auto reboot. Then use network scanner or see DHCP leases on the server side to find the IP of your rig (in most cases it will be the same as in previous attempts), ssh to it and see if xorg was correctly configured.
Anybody knows how this is possible?
i have this since beginnning,, don't mind the 1 miner that dropped beginning of 24h history.. that I m aware off.
How come it is usntable like ths , possible causes?
I am on internet all day gaming and stuff, never have internet connection problems?
I use a http://www.tp-link.com/us/products/details/cat-42_TL-SG1016D.html
for switch and this is plugged in directly into my ethernet router. only miners are on this switch.
i have this since beginnning,, don't mind the 1 miner that dropped beginning of 24h history.. that I m aware off.
How come it is usntable like ths , possible causes?
I am on internet all day gaming and stuff, never have internet connection problems?
I use a http://www.tp-link.com/us/products/details/cat-42_TL-SG1016D.html
for switch and this is plugged in directly into my ethernet router. only miners are on this switch.
it doesnt drop to zero, you need to check the workers stats and not your "account" stats and see which of them are having the issue.
How do I enable root access (miner1) in linux? I would like to troubleshoot by editing 1bash without returning to windows.
My error is line 137: 1861 terminated bash '/home/m1/3main'
My error is line 137: 1861 terminated bash '/home/m1/3main'
There is no need to enable anything. Just ssh to your host and login with user m1 password miner1. This will drop you right into directory /home/m1 where 1bash lives. You can then edit with your favorite editor - e.g., vi 1bash.
Code:
nano 1bash
You have got that right. I haven’t used VI in probably 15 years but still :q! pops into my head. VI is very hard at first but I remember it becoming pretty fast after a while though I will stick with nano now.
I suggest you to test mc :
apt-get install mc
Although a minimum knowledge of vi and nano are a must. Especially vi as almost always is installed by default,
If you feel happy with mc I can pass you some tips that will make your experience easier. Let me know if so.
Better use sudo
Anybody knows how this is possible?
https://image.prntscr.com/image/EF0jexu5QKOeimJCiW-XpA.png
i have this since beginnning,, don't mind the 1 miner that dropped beginning of 24h history.. that I m aware off.
How come it is usntable like ths , possible causes?
I am on internet all day gaming and stuff, never have internet connection problems?
I use a http://www.tp-link.com/us/products/details/cat-42_TL-SG1016D.html
for switch and this is plugged in directly into my ethernet router. only miners are on this switch.
https://image.prntscr.com/image/EF0jexu5QKOeimJCiW-XpA.png
i have this since beginnning,, don't mind the 1 miner that dropped beginning of 24h history.. that I m aware off.
How come it is usntable like ths , possible causes?
I am on internet all day gaming and stuff, never have internet connection problems?
I use a http://www.tp-link.com/us/products/details/cat-42_TL-SG1016D.html
for switch and this is plugged in directly into my ethernet router. only miners are on this switch.
Jump to: