[ mining os ] nvoc - page 215. | Bitcointalksearch.org

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 04:51:35 PM

Quote from: hendivalentino on September 24, 2017, 04:44:26 PM

oh, i added in 1bash, sudo nano 1bash
and my version is v0019

Code:

UBQ_WORKER="$WORKERNAME"
UBQ_ADDRESS="my ubq wallet"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008"

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"

These lines already exist in 1bash; please check (you can see it after EXP coin details). You need to delete the newly added lines and edit the existing ones.

If you are using claymore the above settings should work.

If you still facing issue, when you see this error

Code:

ETH AUTHORIZATION FAILED.. stratum reading socket failed

please run this command:

Code:

ps aux | grep miner

& paste the result here; I can help you from that.

I don't see anything after EXP... that is why i added them manually..

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 04:44:26 PM

oh, i added in 1bash, sudo nano 1bash
and my version is v0019

Code:

UBQ_WORKER="$WORKERNAME"
UBQ_ADDRESS="my ubq wallet"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008"

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"

These lines already exist in 1bash; please check (you can see it after EXP coin details). You need to delete the newly added lines and edit the existing ones.

If you are using claymore the above settings should work.

If you still facing issue, when you see this error

Code:

ETH AUTHORIZATION FAILED.. stratum reading socket failed

please run this command:

Code:

ps aux | grep miner

& paste the result here; I can help you from that.

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 04:37:00 PM

Quote from: hendivalentino on September 24, 2017, 04:29:15 PM

Quote from: damNmad on September 24, 2017, 04:27:17 PM

Quote from: hendivalentino on September 24, 2017, 04:24:22 PM

Quote from: damNmad on September 24, 2017, 04:18:02 PM

Quote from: hendivalentino on September 24, 2017, 04:11:21 PM

anybody can help with UBQ settings?

can you put down a screen shot of your Coin/pool details and the error you getting please??

What miner you are using?

I choose claymore
and then i add new lines, since it doesnt have UBQ lines, so I added:

UBQ_WORKER="$WORKERNAME"
UBQ_ADDRESS="my ubq wallet"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008" I tried without startum, and tried other pool still didnt work.

and the error was
ETH AUTHORIZATION FAILED.. stratum reading socket failed

https://imgur.com/YoJ0UuL

Where did you add these lines?? What version of nvOC you are on??

I added after the claymore sections, how can i see what version?

I mean in which file you have added those lines??

What do you mean by claymore section??

You can see the version of nvOC on top of 1bash file, like this

Code:

#!/bin/bash

# nvOC v0019-1.1 by fullzero

oh, i added in 1bash, sudo nano 1bash
and my version is v0019

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 04:29:15 PM

Quote from: damNmad on September 24, 2017, 04:27:17 PM

Quote from: hendivalentino on September 24, 2017, 04:24:22 PM

Quote from: damNmad on September 24, 2017, 04:18:02 PM

Quote from: hendivalentino on September 24, 2017, 04:11:21 PM

anybody can help with UBQ settings?

can you put down a screen shot of your Coin/pool details and the error you getting please??

What miner you are using?

I choose claymore
and then i add new lines, since it doesnt have UBQ lines, so I added:

UBQ_WORKER="$WORKERNAME"
UBQ_ADDRESS="my ubq wallet"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008" I tried without startum, and tried other pool still didnt work.

and the error was
ETH AUTHORIZATION FAILED.. stratum reading socket failed

Where did you add these lines?? What version of nvOC you are on??

I added after the claymore sections, how can i see what version?

I mean in which file you have added those lines??

What do you mean by claymore section??

You can see the version of nvOC on top of 1bash file, like this

Code:

#!/bin/bash

# nvOC v0019-1.1 by fullzero

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 04:27:17 PM

Quote from: hendivalentino on September 24, 2017, 04:24:22 PM

Quote from: damNmad on September 24, 2017, 04:18:02 PM

Quote from: hendivalentino on September 24, 2017, 04:11:21 PM

anybody can help with UBQ settings?

can you put down a screen shot of your Coin/pool details and the error you getting please??

What miner you are using?

I choose claymore
and then i add new lines, since it doesnt have UBQ lines, so I added:

UBQ_WORKER="$WORKERNAME"
UBQ_ADDRESS="my ubq wallet"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008" I tried without startum, and tried other pool still didnt work.

and the error was
ETH AUTHORIZATION FAILED.. stratum reading socket failed

https://imgur.com/YoJ0UuL

Where did you add these lines?? What version of nvOC you are on??

I added after the claymore sections, how can i see what version?

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 04:24:22 PM

Quote from: damNmad on September 24, 2017, 04:18:02 PM

Quote from: hendivalentino on September 24, 2017, 04:11:21 PM

anybody can help with UBQ settings?

can you put down a screen shot of your Coin/pool details and the error you getting please??

What miner you are using?

I choose claymore
and then i add new lines, since it doesnt have UBQ lines, so I added:

UBQ_WORKER="$WORKERNAME"
UBQ_ADDRESS="my ubq wallet"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008" I tried without startum, and tried other pool still didnt work.

and the error was
ETH AUTHORIZATION FAILED.. stratum reading socket failed

Where did you add these lines?? What version of nvOC you are on??

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 04:18:02 PM

Quote from: hendivalentino on September 24, 2017, 04:11:21 PM

anybody can help with UBQ settings?

can you put down a screen shot of your Coin/pool details and the error you getting please??

What miner you are using?

I choose claymore
and then i add new lines, since it doesnt have UBQ lines, so I added:

UBQ_WORKER="$WORKERNAME"
UBQ_ADDRESS="my ubq wallet"
UBQ_POOL="stratum+tcp://us.ubiqpool.io:8008" I tried without startum, and tried other pool still didnt work.

and the error was
ETH AUTHORIZATION FAILED.. stratum reading socket failed

https://imgur.com/YoJ0UuL

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 04:11:21 PM

anybody can help with UBQ settings?

can you put down a screen shot of your Coin/pool details and the error you getting please??

What miner you are using?

hendivalentino

newbie

Activity: 31

Merit: 0

anybody can help with UBQ settings?

mikespax

full member

Activity: 362

Merit: 102

Yeah, I'm updated. No temp or visual clock controls on the last two cards now. No big deal, seems to be mining okay anyways.

Has anyone gotten over 13 cards in one rig by mixing the manufacturers? I'm planning to buy some Vega 56s to mix in with my 13 1080tis and would love to know if anyone's done this already and how I would do so on nvOS or whatever.

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 03:22:03 PM

Quote from: hendivalentino on September 24, 2017, 03:17:58 PM

Quote from: damNmad on September 24, 2017, 03:09:59 PM

Quote from: hendivalentino on September 24, 2017, 03:01:55 PM

Quote from: damNmad on September 24, 2017, 02:14:28 PM

Quote from: hendivalentino on September 24, 2017, 01:42:40 PM

Quote from: damNmad on September 24, 2017, 01:35:17 PM

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

and where should i add this? thanks!

At Coin details:

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

i tried both and still saying could not resolve host,.... and i tried to put stratum still the same..

Make sure you had this option setup right

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"

&&

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

Let me know if you still see issue.

ahh so this is at ETHMINER or CLAYMORE section?... okay i got it.. I did that, do i need to use claymore or ethminer? also do i need to say YES on the one that says using environment variable? thanks!

you can use any miner using the above settings, environment variables doesn't matter. You are welcome

im getting this.. ETH AUTHORIZATION FAILED.. stratum reading socket failed

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 03:17:58 PM

Quote from: damNmad on September 24, 2017, 03:09:59 PM

Quote from: hendivalentino on September 24, 2017, 03:01:55 PM

Quote from: damNmad on September 24, 2017, 02:14:28 PM

Quote from: hendivalentino on September 24, 2017, 01:42:40 PM

Quote from: damNmad on September 24, 2017, 01:35:17 PM

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

and where should i add this? thanks!

At Coin details:

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

i tried both and still saying could not resolve host,.... and i tried to put stratum still the same..

Make sure you had this option setup right

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"

&&

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

Let me know if you still see issue.

ahh so this is at ETHMINER or CLAYMORE section?... okay i got it.. I did that, do i need to use claymore or ethminer? also do i need to say YES on the one that says using environment variable? thanks!

you can use any miner using the above settings, environment variables doesn't matter. You are welcome

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 03:09:59 PM

Quote from: hendivalentino on September 24, 2017, 03:01:55 PM

Quote from: damNmad on September 24, 2017, 02:14:28 PM

Quote from: hendivalentino on September 24, 2017, 01:42:40 PM

Quote from: damNmad on September 24, 2017, 01:35:17 PM

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

and where should i add this? thanks!

At Coin details:

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

i tried both and still saying could not resolve host,.... and i tried to put stratum still the same..

Make sure you had this option setup right

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"

&&

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

Let me know if you still see issue.

ahh so this is at ETHMINER or CLAYMORE section?... okay i got it.. I did that, do i need to use claymore or ethminer? also do i need to say YES on the one that says using environment variable? thanks!

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 03:01:55 PM

Quote from: damNmad on September 24, 2017, 02:14:28 PM

Quote from: hendivalentino on September 24, 2017, 01:42:40 PM

Quote from: damNmad on September 24, 2017, 01:35:17 PM

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

and where should i add this? thanks!

At Coin details:

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

i tried both and still saying could not resolve host,.... and i tried to put stratum still the same..

Make sure you had this option setup right

Code:

DOT_POOL_FORMAT_or_FORWARD_SLASH_POOL_FORMAT="DOT"

&&

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

Let me know if you still see issue.

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 02:14:28 PM

Quote from: hendivalentino on September 24, 2017, 01:42:40 PM

Quote from: damNmad on September 24, 2017, 01:35:17 PM

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

and where should i add this? thanks!

At Coin details:

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

i tried both and still saying could not resolve host,.... and i tried to put stratum still the same..

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 01:42:40 PM

Quote from: damNmad on September 24, 2017, 01:35:17 PM

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

and where should i add this? thanks!

At Coin details:

Code:

UBQ_WORKER=$WORKERNAME
UBQ_ADDRESS="replace_with_your_UBIQ_address"
UBQ_POOL="eu.ubiqpool.io:8008"

hendivalentino

newbie

Activity: 31

Merit: 0

Quote from: damNmad on September 24, 2017, 01:35:17 PM

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

and where should i add this? thanks!

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: hendivalentino on September 24, 2017, 12:31:31 PM

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

Try this:

Code:

UBQ_POOL="eu.ubiqpool.io:8008"

hendivalentino

newbie

Activity: 31

Merit: 0

guys, i cant do UBQ... i choose the coin UBQ and put the stratum but didnt work.... do we need to use claymore? if yes can someone give me the settings? thanks!

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: mikespax on September 24, 2017, 10:52:13 AM

I think I'm having some errors with the beta where it can't set fan speed on the last card.

"Error assigning value 80 to attribute 'GPUTargetFanSpeed' ...... (Unknown Error)

Doesn't matter if I have 13 or 8 cards, always has an issue with the last card. Also doesn't seem that the OC settings or power limits are getting set on the last card. Either way, it still mines with all cards, I'm just worried about what potential overheat dangers I might be exposing myself to if I have no temperature controls on one of the cards.

Also, when I hook up 14 or more GPUs to my B250 Expert mobo, I can't get it to boot at all. (Of course this is probably an issue with how I have my stuff hooked up and absolutely nothing with nvOS.)

Did you updated to 19-1.1 ?

Topic: [ mining os ] nvoc - page 215. (Read 418546 times)