[ mining os ] nvoc - page 234. | Bitcointalksearch.org

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: papampi on September 09, 2017, 01:16:57 AM

Is it possible to compile latest ccminer klaust for linux ?
I'm getting +1000 kh/s neoscrypt with 1070 on windows with it
while SPccminer gives 800 kh/s on nvoc

Code:

m1@m1-desktop-101:~/Downloads/ccminer-klaust/ccminer-klaust$ ./ccminer --version
ccminer 8.13-KlausT (64bit) for nVidia GPUs
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 8.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

ccminer v8.13-KlausT
libcurl/7.47.0 GnuTLS/3.4.10 zlib/1.2.8 libidn/1.32 librtmp/2.3

I compiled it but gives me error :

Code:

[2017-09-09 15:28:05] GPU #3: waiting for data
[2017-09-09 15:28:05] GPU #0: waiting for data
[2017-09-09 15:28:05] GPU #4: waiting for data
[2017-09-09 15:28:05] GPU #5: waiting for data
[2017-09-09 15:28:05] GPU #1: waiting for data
[2017-09-09 15:28:06] Stratum difficulty set to 256
[2017-09-09 15:28:06] Stratum difficulty set to 64
[2017-09-09 15:28:06] hub.miningpoolhub.com:20510 neoscrypt block 1876969
Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1439 : invalid device symbol.
Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1428 : driver shutting down.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: gdemon on September 08, 2017, 10:55:37 PM

Quote from: gdemon on September 08, 2017, 12:12:07 AM

Hi
Help or assist to understand with a problem.
when starting this error
/ home / m1 / 3main: line 53: nvidia-smi: command not found

rig IP: 192.168.1.3

rig MAC: 70: 85: c2: 49: 78: 44

01: 00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
07: 00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
08: 00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)

/ home / m1 / 3main: line 144: nvidia-smi: command not found

Thu Sep 7 13:54:01 EDT 2017
Action: Installing daemon (12.0.76279) for 'systemd' ...
installing /etc/systemd/system/teamviewerd.service (/opt/teamviewer/tv_bin/script/teamviewerd.service)
Try: systemctl enable teamviewerd.service
systemctl start teamviewerd.service

[WARN] Unable to load the library libutempter!
[WARN] The command will not work in guake!
[WARN] libutempter.so.0: can not open shared object file: No such file or directory

LAUNCHING: IAmNotAJeep_and_Maxximus007_WATCHDOG

process in screen wdog; attach with: screen -r wdog

LAUNCHING: Maxximus007_AUTO_TEMPERATURE_CONTROL

process in screen temp; attach with: screen -r temp

/ home / m1 / 3main: line 450: [: NO: integer expression expected
/ home / m1 / 3main: line 455: nvidia-smi: command not found

ERROR: Error querying enabled displays on GPU 0 (Missing
   Extension).

ERROR: Error querying connected displays on GPU 0 (Missing
   Extension).

ERROR: Error resolving target specification 'gpu: 0' (No
   targets match target specification), specified in
   assignment '[gpu: 0] / GPUGraphicsClockOffset [3] = 50'.

ERROR: Error querying enabled displays on GPU 0 (Missing
   Extension).

ERROR: Error querying connected displays on GPU 0 (Missing
   Extension).

ERROR: Error resolving target specification 'gpu: 0' (No
   targets match target specification), specified in
   assignment
   '[gpu: 0] / GPUMemoryTransferRateOffset [3] = 200'.

/ home / m1 / 3main: line 877: [: ==: unary operator expected
/ home / m1 / 3main: line 883: [: ==: unary operator expected
/ home / m1 / 3main: line 891: [: ==: unary operator expected
/ home / m1 / 3main: line 901: [: ==: unary operator expected
/ home / m1 / 3main: line 913: [: ==: unary operator expected
/ home / m1 / 3main: line 927: [: ==: unary operator expected
/ home / m1 / 3main: line 943: [: ==: unary operator expected
/ home / m1 / 3main: line 961: [: ==: unary operator expected
/ home / m1 / 3main: line 981: [: ==: unary operator expected
/ home / m1 / 3main: line 1003: [: ==: unary operator expected
/ home / m1 / 3main: line 1027: [: ==: unary operator expected
/ home / m1 / 3main: line 1053: [: ==: unary operator expected
/ home / m1 / 3main: line 1081: [: ==: unary operator expected

LAUNCHING: Mining Process

process in screen miner; attach with: screen -r miner

please help me

Is integrated GPU disabled
And did you connect monitor to GTX GPU on first boot !

Also try to run these commands :

Code:

sudo apt update
sudo apt install nvidia-384

reboot, see if it fixed or not.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: mikespax on September 09, 2017, 03:56:15 AM

Quote from: davidadrake on September 09, 2017, 02:10:17 AM

I must be missing something stupid, but I cannot get this to boot off my USB. My computer boots from USB fine, because I tested it with a Ubuntu image written to that same stick. I usually use Win32 Disk Imager, but that didn't boot, and neither did rufus or etch. I tried YUMI, but I guess my 16GB USB drive is too small to fit that and this. I know it writes the image fine because I can open the drive in Windows to edit the 1bash file. I use SD Formatter to reclaim the whole drive each time prior to writing this image.

Any other ideas? Undecided

I'm running off of a 32 GB sd card in a USB card reader right now. You might give that a shot if you're just desperate to get something running. I burned the image using etcher on a Macbook.

Try HDD raw copy tool

http://hddguru.com/software/HDD-Raw-Copy-Tool/

mikespax

full member

Activity: 362

Merit: 102

Quote from: davidadrake on September 09, 2017, 02:10:17 AM

I must be missing something stupid, but I cannot get this to boot off my USB. My computer boots from USB fine, because I tested it with a Ubuntu image written to that same stick. I usually use Win32 Disk Imager, but that didn't boot, and neither did rufus or etch. I tried YUMI, but I guess my 16GB USB drive is too small to fit that and this. I know it writes the image fine because I can open the drive in Windows to edit the 1bash file. I use SD Formatter to reclaim the whole drive each time prior to writing this image.

Any other ideas? Undecided

I'm running off of a 32 GB sd card in a USB card reader right now. You might give that a shot if you're just desperate to get something running. I burned the image using etcher on a Macbook.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: salfter on September 08, 2017, 03:26:01 PM

Quote from: papampi on September 08, 2017, 05:09:14 AM

salfeter mph gives me error

Code:

Traceback (most recent call last):
  File "/home/m1/mph_switch", line 14, in
   cfg=json.loads(open(sys.argv[1]).read())
  File "/usr/lib/python2.7/json/__init__.py", line 339, in loads
   return _default_decoder.decode(s)
  File "/usr/lib/python2.7/json/decoder.py", line 364, in decode
   obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/lib/python2.7/json/decoder.py", line 382, in raw_decode
   raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded

That's the line that loads the config file. By the time it's run, 3main should have already generated mph_conf.json. What do you have in that file?

Now I'm getting new error

Code:

Traceback (most recent call last):
  File "/home/m1/mph_switch", line 36, in
   exchrate=float(json.loads(urllib2.urlopen("https://api.coinbase.com/v2/exchange-rates?currency=BTC").read())["data"]["rates"][currency])
  File "/usr/lib/python2.7/urllib2.py", line 154, in urlopen
   return opener.open(url, data, timeout)
  File "/usr/lib/python2.7/urllib2.py", line 435, in open
   response = meth(req, response)
  File "/usr/lib/python2.7/urllib2.py", line 548, in http_response
   'http', request, response, code, msg, hdrs)
  File "/usr/lib/python2.7/urllib2.py", line 473, in error
   return self._call_chain(*args)
  File "/usr/lib/python2.7/urllib2.py", line 407, in _call_chain
   result = func(*args)
  File "/usr/lib/python2.7/urllib2.py", line 556, in http_error_default
   raise HTTPError(req.get_full_url(), code, msg, hdrs, fp)
urllib2.HTTPError: HTTP Error 400: Bad Request

Seems like coinbase api blocks my country ip
cant open the url without vpn. Sad

Possible to disable exchange rate? and use btc as currency?

davidadrake

newbie

Activity: 41

Merit: 0

I must be missing something stupid, but I cannot get this to boot off my USB. My computer boots from USB fine, because I tested it with a Ubuntu image written to that same stick. I usually use Win32 Disk Imager, but that didn't boot, and neither did rufus or etch. I tried YUMI, but I guess my 16GB USB drive is too small to fit that and this. I know it writes the image fine because I can open the drive in Windows to edit the 1bash file. I use SD Formatter to reclaim the whole drive each time prior to writing this image.

Any other ideas? Undecided

rayd89

newbie

Activity: 28

Merit: 0

Happy to report -

Once i got rid of that shitty celeron processor and upgraded to the pentium G4560 - all issues went away immediately.
NVOC - greatest mining OS ever.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Is it possible to compile latest ccminer klaust for linux ?
I'm getting +1000 kh/s neoscrypt with 1070 on windows with it
while SPccminer gives 800 kh/s on nvoc

gdemon

newbie

Activity: 4

Merit: 0

Quote from: gdemon on September 08, 2017, 12:12:07 AM

Hi
Help or assist to understand with a problem.
when starting this error
/ home / m1 / 3main: line 53: nvidia-smi: command not found

rig IP: 192.168.1.3

rig MAC: 70: 85: c2: 49: 78: 44

01: 00.0 VGA compatible controller: NVIDIA Corporation Device 1b06 (rev a1)
07: 00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)
08: 00.0 VGA compatible controller: NVIDIA Corporation Device 1c03 (rev a1)

/ home / m1 / 3main: line 144: nvidia-smi: command not found

Thu Sep 7 13:54:01 EDT 2017
Action: Installing daemon (12.0.76279) for 'systemd' ...
installing /etc/systemd/system/teamviewerd.service (/opt/teamviewer/tv_bin/script/teamviewerd.service)
Try: systemctl enable teamviewerd.service
systemctl start teamviewerd.service

[WARN] Unable to load the library libutempter!
[WARN] The command will not work in guake!
[WARN] libutempter.so.0: can not open shared object file: No such file or directory

LAUNCHING: IAmNotAJeep_and_Maxximus007_WATCHDOG

process in screen wdog; attach with: screen -r wdog

LAUNCHING: Maxximus007_AUTO_TEMPERATURE_CONTROL

process in screen temp; attach with: screen -r temp

/ home / m1 / 3main: line 450: [: NO: integer expression expected
/ home / m1 / 3main: line 455: nvidia-smi: command not found

ERROR: Error querying enabled displays on GPU 0 (Missing
       Extension).

ERROR: Error querying connected displays on GPU 0 (Missing
       Extension).

ERROR: Error resolving target specification 'gpu: 0' (No
       targets match target specification), specified in
       assignment '[gpu: 0] / GPUGraphicsClockOffset [3] = 50'.

ERROR: Error querying enabled displays on GPU 0 (Missing
       Extension).

ERROR: Error querying connected displays on GPU 0 (Missing
       Extension).

ERROR: Error resolving target specification 'gpu: 0' (No
       targets match target specification), specified in
       assignment
       '[gpu: 0] / GPUMemoryTransferRateOffset [3] = 200'.

/ home / m1 / 3main: line 877: [: ==: unary operator expected
/ home / m1 / 3main: line 883: [: ==: unary operator expected
/ home / m1 / 3main: line 891: [: ==: unary operator expected
/ home / m1 / 3main: line 901: [: ==: unary operator expected
/ home / m1 / 3main: line 913: [: ==: unary operator expected
/ home / m1 / 3main: line 927: [: ==: unary operator expected
/ home / m1 / 3main: line 943: [: ==: unary operator expected
/ home / m1 / 3main: line 961: [: ==: unary operator expected
/ home / m1 / 3main: line 981: [: ==: unary operator expected
/ home / m1 / 3main: line 1003: [: ==: unary operator expected
/ home / m1 / 3main: line 1027: [: ==: unary operator expected
/ home / m1 / 3main: line 1053: [: ==: unary operator expected
/ home / m1 / 3main: line 1081: [: ==: unary operator expected

LAUNCHING: Mining Process

process in screen miner; attach with: screen -r miner

please help me

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: mibjt on September 08, 2017, 02:50:42 PM

It works fantastic! Thank You! Do you happen to have a solution where this can mine Ubiq coin?

There you go;

Quote from: damNmad on August 27, 2017, 02:45:35 PM

Quote from: Dhodge87 on August 27, 2017, 01:54:37 PM

Quote from: ?? on ??

Is there any way to mine ubiq with this software?

Add the following details to your 1bash :

Code:

COIN="UBQ"

Update your own address, pool and worker :

Code:

UBQ_WORKER="$IP_AS_WORKER"
UBQ_ADDRESS="xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx"
UBQ_POOL="stratum+tcp://eu.ubiqpool.io:8008"
UBQ_EXTENTION_ARGUMENTS=""

Add this in the right place in the bottom code

Code:

if [ $COIN == "UBQ" ]
then

if [ $CLAYMORE_VERSION == "9_7" ]
then
HCD='/home/m1/eth/9_7/ethdcrminer64'
fi

if [ $CLAYMORE_VERSION == "9_5" ]
then
HCD='/home/m1/eth/9_5/ethdcrminer64'
fi

if [ $CLAYMORE_VERSION == "9_4" ]
then
HCD='/home/m1/eth/9_4/ethdcrminer64'
fi

if [ $CLAYMORE_VERSION == "8_0" ]
then
HCD='/home/m1/eth/8_0/ethdcrminer64'
fi

UBQADDR="$UBQ_ADDRESS/$UBQ_WORKER"

screen -dmS miner $HCD -epool $UBQ_POOL -ewal $UBQADDR -epsw x -mode 1 -allpools 1 -dbg -1 $UBQ_EXTENTION_ARGUMENTS

if [ $LOCALorREMOTE == "LOCAL" ]
then
screen -r miner
fi

BITCOIN="theGROUND"

while [ $BITCOIN == "theGROUND" ]
do
sleep 60
done
fi

creepas

member

Activity: 67

Merit: 10

Quote from: damNmad on September 08, 2017, 05:00:18 PM

Quote from: creepas on September 08, 2017, 04:53:03 PM

Hello,

i just want to post here that we made with this system run 19 GPU.

Its amaizing.

cReepas

Wow that's good to know Grin

More info here: https://bitcointalksearch.org/topic/m.21649591

best regards

cReepas

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: creepas on September 08, 2017, 04:53:03 PM

Hello,

i just want to post here that we made with this system run 19 GPU.

Its amaizing.

cReepas

Wow that's good to know Grin

creepas

member

Activity: 67

Merit: 10

Hello,

i just want to post here that we made with this system run 19 GPU.

Its amaizing.

cReepas

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: damNmad on September 08, 2017, 04:41:01 PM

Quote from: papampi on September 08, 2017, 03:57:56 PM

Quote from: damNmad on September 08, 2017, 03:50:34 PM

Quote from: papampi on September 08, 2017, 03:37:05 PM

Zpool don't have worker and only way you can see your worker is in your password as an option
If you add worker next to address BTC address like other pools you don't see your worker.
My bad I added worker in address too . It should be in password only.

Code:

ZPOOLADDR="$BTC_ADDRESS"
ZPOOLPASS="$WORKERNAME,c=BTC"

You can search your stats using your BTC address right? But, that only give you over all info not RIG wise, is that what you are trying to say??

Exactly
when search for your btc address it shows worker/rig without name
only way to see which rig it is, is through password option as Extra

Perfect, thanks papampi for explanation

ZPOOLPASS variable will be useful for people with multiple RIG's pointing to ZPOOL, but don't think we need ZPOOLADDR as it only holds value of an existing variable ($BTC_ADDRESS)?

If all want to use BtC, which usually do it wont be needed
but zpool documentation says you can exchange to any coin you want so ...

its your choice to add more headache and options that wont be needed usually Wink

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: papampi on September 08, 2017, 03:57:56 PM

Quote from: damNmad on September 08, 2017, 03:50:34 PM

Quote from: papampi on September 08, 2017, 03:37:05 PM

Zpool don't have worker and only way you can see your worker is in your password as an option
If you add worker next to address BTC address like other pools you don't see your worker.
My bad I added worker in address too . It should be in password only.

Code:

ZPOOLADDR="$BTC_ADDRESS"
ZPOOLPASS="$WORKERNAME,c=BTC"

You can search your stats using your BTC address right? But, that only give you over all info not RIG wise, is that what you are trying to say??

Exactly
when search for your btc address it shows worker/rig without name
only way to see which rig it is, is through password option as Extra

Perfect, thanks papampi for explanation

ZPOOLPASS variable will be useful for people with multiple RIG's pointing to ZPOOL, but don't think we need ZPOOLADDR as it only holds value of an existing variable ($BTC_ADDRESS)?

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: salfter on September 08, 2017, 03:18:39 PM

Quote from: damNmad on September 07, 2017, 04:32:57 PM

MPH wise, we got the major ethash and equihash algos, we already have SALFTER's MPH switcher.

Only thing remaining is the zpool algos.

Someone asked me about implementing a switcher for zpool. Took a quick look yesterday to see what information their API provides...turns out it's not much at all. Unless they have some undocumented API calls available, there's nothing on which to base a switching decision. I suppose there's WhatToMine, which could possibly lead to a more generalized switcher, but they appear to have somewhat limited algorithm coverage.

It's possible to calculate expected production for a coin based on your equipment's hashrate and the network's difficulty; that's basically what WhatToMine does. If I can find a sufficiently diverse source of network difficulty figures, I might be able to knock something together. (https://chainz.cryptoid.info/dmd/api.dws?q=summary might be a possibility; I need to compare it to what can be mined at NiceHash/MiningPoolHub/ZPool to see if it might be sufficient. Back in the day, I was running a bunch of block explorers myself; I'd rather not go back to that if I can avoid it.)

Edit: On slightly deeper inspection, the aforementioned chainz.cryptoid.info doesn't even cover the likes of BTC or ETH, though it does have a ton of shitcoins I've never heard of. Anybody have recommendations for a multiple-coin block explorer with an API that makes difficulty information available?

It was me who asked for Zpool auto switch
Thanks a lot for taking the time to consider doing it.
There are many zpool switch under windows
If it helps have a look at these
megaminer , multipoolminer and nemosminer

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: damNmad on September 08, 2017, 03:50:34 PM

Quote from: papampi on September 08, 2017, 03:37:05 PM

Zpool don't have worker and only way you can see your worker is in your password as an option
If you add worker next to address BTC address like other pools you don't see your worker.
My bad I added worker in address too . It should be in password only.

Code:

ZPOOLADDR="$BTC_ADDRESS"
ZPOOLPASS="$WORKERNAME,c=BTC"

You can search your stats using your BTC address right? But, that only give you over all info not RIG wise, is that what you are trying to say??

Exactly
when search for your btc address it shows worker/rig without name
only way to see which rig it is, is through password option as Extra

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: salfter on September 08, 2017, 03:26:01 PM

Quote from: papampi on September 08, 2017, 05:09:14 AM

salfeter mph gives me error

Code:

Traceback (most recent call last):
  File "/home/m1/mph_switch", line 14, in
   cfg=json.loads(open(sys.argv[1]).read())
  File "/usr/lib/python2.7/json/__init__.py", line 339, in loads
   return _default_decoder.decode(s)
  File "/usr/lib/python2.7/json/decoder.py", line 364, in decode
   obj, end = self.raw_decode(s, idx=_w(s, 0).end())
  File "/usr/lib/python2.7/json/decoder.py", line 382, in raw_decode
   raise ValueError("No JSON object could be decoded")
ValueError: No JSON object could be decoded

That's the line that loads the config file. By the time it's run, 3main should have already generated mph_conf.json. What do you have in that file?

I should not edit mph_conf.json ?
I just copied the default and it works ok now.

but another question, does it calculate/benchamrk my hash rate ?
I have 6 1070 in this rig and the profit shows :

Code:

zcash (Equihash): 0.00103495 BTC/day (4.40 USD/day)
ethereum (Ethash): 0.00085372 BTC/day (3.63 USD/day)
ethereum-classic (Ethash): 0.00084464 BTC/day (3.59 USD/day)
musicoin (Ethash): 0.00082621 BTC/day (3.51 USD/day)
monero (Cryptonight): 0.00081841 BTC/day (3.48 USD/day)
expanse (Ethash): 0.00078902 BTC/day (3.35 USD/day)
feathercoin (NeoScrypt): 0.00069831 BTC/day (2.97 USD/day)
zclassic (Equihash): 0.00068755 BTC/day (2.92 USD/day)
digibyte-groestl (Myriad-Groestl): 0.00053035 BTC/day (2.25 USD/day)
vertcoin (Lyra2RE2): 0.00049258 BTC/day (2.09 USD/day)
maxcoin (Keccak): 0.00049185 BTC/day (2.09 USD/day)
groestlcoin (Groestl): 0.00039850 BTC/day (1.69 USD/day)
myriadcoin-groestl (Myriad-Groestl): 0.00036546 BTC/day (1.55 USD/day)
digibyte-skein (Skein): 0.00026656 BTC/day (1.13 USD/day)
myriadcoin-skein (Skein): 0.00026504 BTC/day (1.13 USD/day)
siacoin (Sia): 0.00015928 BTC/day (0.68 USD/day)
geocoin (Qubit): -0.00011738 BTC/day (-0.50 USD/day)
dash (X11): -0.00015608 BTC/day (-0.66 USD/day)
digibyte-qubit (Qubit): -0.00016407 BTC/day (-0.70 USD/day)
startcoin (X11): -0.00017302 BTC/day (-0.74 USD/day)
gamecredits (Scrypt): -0.00019595 BTC/day (-0.83 USD/day)
litecoin (Scrypt): -0.00020003 BTC/day (-0.85 USD/day)
adzcoin (X11): -0.00020288 BTC/day (-0.86 USD/day)
verge-scrypt (Scrypt): -0.00021493 BTC/day (-0.91 USD/day)
sexcoin (Scrypt): -0.00022752 BTC/day (-0.97 USD/day)

So at best I get 4.4$/day with my 6 cards ?
Another question.
How do I chose which algos/coins to mine on MPH?

damNmad

full member

Activity: 378

Merit: 104

nvOC forever

Quote from: papampi on September 08, 2017, 03:37:05 PM

Zpool don't have worker and only way you can see your worker is in your password as an option
If you add worker next to address BTC address like other pools you don't see your worker.
My bad I added worker in address too . It should be in password only.

Code:

ZPOOLADDR="$BTC_ADDRESS"
ZPOOLPASS="$WORKERNAME,c=BTC"

You can search your stats using your BTC address right? But, that only give you over all info not RIG wise, is that what you are trying to say??

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Zpool don't have worker and only way you can see your worker is in your password as an option
If you add worker next to address BTC address like other pools you don't see your worker.
My bad I added worker in address too . It should be in password only.

Code:

ZPOOLADDR="$BTC_ADDRESS"
ZPOOLPASS="$WORKERNAME,c=BTC"

Topic: [ mining os ] nvoc - page 234. (Read 418546 times)