Topic: [ mining os ] nvoc - page 266. (Read 418549 times)

i can confirm that one normal GPU with many p106 works well out of the box.

How to add Claymore 9.8 Im keep getting error with screen attach?

Hi,

i have successfully reduced power-limit (via 1bash) as was instructed by the program its just trial and error, as there is not a tutorial for nvOC.
( set maximus =YES and Individual Power set =YES then set preferred values and restart system.) I confirm that it works.
for OC powermiser works but tomorrow we will test if it will work with 1bash file.
we are running 1*gtx1060 for vga(display) and 12*p106-100 all cards are running and working. Until you get hold of P106-100 to make it possible to run 13*P106-100 ppl must use one normal gaming GPU.

So far i know trpuvot fork is the best for skunk algo, i dont test new palginmod release https://github.com/palginpav/ccminer/releases cause is build for window. SP_mod give good hashrate but u have to pay for his mod

I get same result on suprnova or pool.mn, for 2 days on each after i install krnlx, i lost 30% income and lost 30% on wathtomine prediction.
I give a try to push my MemoryClock to +100 and i lost hashrate instant, prolly depend from the card. Maybe try to lower your MemoryClock u gona gain more hashrate. I use 8 x ASUS 1070 8OG, i have stable for more them 24h running and get 242+mh/s

Where are you getting your expected shares tally from?  I think that varies based on difficulty of the shares calculated which is determined by the stratum server, not your machine, so i don't know how you'd reliably determine expected shares in order to reason that you're losing 30%.  Right now with 460-480Mh/s I'm getting about 22 coins an hour, which seems to be in line with the predictions of whattomine.com's mining calculator profit wise, ~ 525-550 coins a day @ $.07 per coin = ~$37-38.00 /day.

 I haven't mined at length with TPruvot ccminer 2.2 with the current configuration on my system, so I don't know if it would result in higher profit, but krnlx seems to be on point for profitability estimates now that I've got it properly configured and my clock settings are dialed in.   FWIW, I'm not sure why you're downclocking your memory so much.  I overclock mine +100 on 1070s and +800 on 1080 Tis.  I see no benefit from underclocking memory on Nvidia cards really since power usage comes from core clock speed primarily, and it could result in unstable mining to underclock memory too much.

EDIT:  I had the under use problem with Watchdog as well, but I took care of that by raising my clock speed on my GPUs from +100 to +125 and setting intensity to -i 25, now I don't have watchdog restarts at all. 

It zeroes out that partition because there were some problems with the script being run on the windows partition on boot that were fixed by moving the script to the / partition on the first bootup of the system in version 0018.  I would think that once you've got your thumb drive all configured, you could just dd the / partition (and any other linux partitions) to a hard drive alongside windows so long as you know how to edit the grub configuration or windows config manager (BCD) to boot to the correct linux partition for the o/s in order to get dual boot to work.  That can be tricky though, so i wouldn't recommend doing it on a drive you're afraid to lose data on without backing up everything first.

Not rejected shares, is a weird thing and i dont analyze deeper on this. I get 70% of expected share with this hashrate report, so remove 30% of your hashrate when u use krnlx

How do you lose 30% of expected shares?  You mean rejected shares? 

hi fullzero so much thanks to all your works, just wondering on your next release is it possible for you to make the whole nvoc smaller on size so it can run on a 16gb flash drive? just my 2 cents

thanks

God Bless

To All Ubuntu / *nix guru outhere,

I read the 2unix script and I still don't understand why it's removing the  "Windows partition data".
I'm pretty sure the thumbdrive is mounted under m1 alias, but why do we need to zero the sda partition. That doesn't make sense to me. (Is it a preparation in case I need to copy the mounted m1 to sda?)

My aim is to dual boot Windows 10 with it.

Yes indeed...

Hum just stay away from krnlx release ... Low report share is a "know" problem ...
I lost one week of mining on this stupid release ... Just dont USE krlnx this dev drop a brocken build and vanish ... First and last one i use something from him ...
So a basic; krlnx mod boost your hashrate but you loose 30% expected share ... Use new ccminer release from tpru u get same hashrate and REAL SHARE.
For 1070 u can push -i 25, Coreclock + 100/140 depend on card, MemoryClock -1500. I dont use 1080, but i bet u can push them to -i 26, to grab a solid 50mh/s+ per 1080ti

https://github.com/tpruvot/ccminer/releases link to tpruvot version.

EDIT : U have to stop watchdog when u run ccminer for skunk, sometime your GPU will go to 0% and instant back to 100%. Watchdog dont like this and tricker miner restart but no need. Easy solution get a stable oc, run without Watchdog. If i remember right, some fix will come with nvOC0019

Not sure whether dual boot is possible but you can install nvOC on separate HDD as well, it still works like normal.

Google Drive download of nvoc 18 containts corrupted file 
https://gyazo.com/4d3f1d22fdb1dc4bd691d7c691ceb275

I might try Mega Download for now, but please upload img again

Hi Fullzero,

I really love your work, I got my gtx 1070 working and mining around 31~mhs each.
My system boots up using the thumbdrive, but I would like to use my hdd instead.

My hard disk drive has Windows 10 installed on it, I'm aware that nvOC will zero it out due to "dd if=/dev/zero of=/dev/sda" https://bitcointalksearch.org/topic/m.20290398.
What I would like to do is to dual boot Windows 10 together with nvOC on it.
Is there possible way to do that?

If not, is it possible to install the nvOC in hdd instead of thumbdrive?

Thanks in advance, it might be helpful to some.

Thanks for posting this info - I banged my head against a wall for quite a while trying to figure this error out before giving up on it.  This worked like a charm for me.

Though I think I'm still getting really low hashrates for skunk - whattomine thinks I should be getting 450mh/s with 5 1080 Tis and 7 1070s but I was only getting around 300mh/s.  With the new krnlx miner I'm still only getting about 370Mh/s, which still seems pretty low.  My miner also restarts with the watchdog reporting under utilization.  My 1080 Tis are only running at about 60% and 1070s at 80-85% capacity.  Can't figure out what's causing that.

EDIT: I added the '-i 25' flag to the command line and boosted core clock on the 1070s to +125 now I'm up at 480mh/s =)

That's not a bug, its a feature.  It means your settings for power will be configured each time the script loads.  Persistence mode would be if you didn't use the script and set the configuration in xserver settings panel manually, then saved the profile. That would load persistent settings every time you boot (pointless unless you disable power settings in the script, which you probably don't want to do)

Thank you all works now

i built the code and tested, it has the same hashrate as Genoil's in nvOC.
but it could have more features, e.g. shwo hashrate per card.,so it's better to add it in the next nvOC release.