[ mining os ] nvoc - page 73. | Bitcointalksearch.org

LuKePicci

jr. member

Activity: 128

Merit: 1

Quote from: leenoox on January 18, 2018, 06:26:21 AM

Quote from: papampi on January 18, 2018, 05:25:08 AM

Quote from: LuKePicci on January 18, 2018, 05:04:01 AM

Quote from: papampi on January 18, 2018, 01:46:01 AM

Quote from: car1999 on January 18, 2018, 12:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

Testing the options now
I'm creating a smaller 12Gb from v0019-2.0 with auto expand to test on some SSD/USB
Couldn't go bellow that size yet, gparted was giving error.

Will make an image from system partition as your suggestion later too.

There are some options that need to be loaded in grub (boot loader). Providing just system partition will complicate things a bit... you will have to manually edit grub config afterwards. Auto resize will be much better option.

There is no separate boot partition from what I see in the provided full disk image so I think there is nothing regarding grub outside the main partition except from the first part of grub loader binary written in the MBR, i think that using the partition image for same version reimaging and not for upgrading or fresh install is possibile without so much hassle. Auto expand is fine but my concern was about the possibility of rewrite the nvOC partition even if there are other os in the drive. Moreover, if the other os is still a Linux os will be pretty easy for a mid-skilled guy to just add an entry in its grub.cfg to boot from the nvOC partition, and this will work flawlessly even in case of nvOC upgrades / fresh installations since the MBR part of grub that will be used is still pointing to the main/other os grub binaries, so the boot loader and configuration of nvOC will be totally bypassed. Of course if there are any customization in the grub.cfg of nvOC there should be copied also in the added section to the main and actually in use customized grub.cfg file in the boot partition.

mtx_demon

full member

Activity: 273

Merit: 100

So When I start KTccminer I get a msg the out of memory
do you guys know about it?

leenoox

full member

Activity: 200

Merit: 101

Quote from: papampi on January 18, 2018, 05:25:08 AM

Quote from: LuKePicci on January 18, 2018, 05:04:01 AM

Quote from: papampi on January 18, 2018, 01:46:01 AM

Quote from: car1999 on January 18, 2018, 12:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

Testing the options now
I'm creating a smaller 12Gb from v0019-2.0 with auto expand to test on some SSD/USB
Couldn't go bellow that size yet, gparted was giving error.

Will make an image from system partition as your suggestion later too.

There are some options that need to be loaded in grub (boot loader). Providing just system partition will complicate things a bit... you will have to manually edit grub config afterwards. Auto resize will be much better option.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: LuKePicci on January 18, 2018, 05:04:01 AM

Quote from: papampi on January 18, 2018, 01:46:01 AM

Quote from: car1999 on January 18, 2018, 12:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

Testing the options now
I'm creating a smaller 12Gb from v0019-2.0 with auto expand to test on some SSD/USB
Couldn't go bellow that size yet, gparted was giving error.

Will make an image from system partition as your suggestion later too.

LuKePicci

jr. member

Activity: 128

Merit: 1

Quote from: papampi on January 18, 2018, 01:46:01 AM

Quote from: car1999 on January 18, 2018, 12:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Hey papampi, why not providing also the image of just the system partition and not the whole drive? May be very useful in case of re-imaging where nvOC is installed for example in dual-boot systems.

mtx_demon

full member

Activity: 273

Merit: 100

Do you guys already have ccminer KlausT??

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: car1999 on January 18, 2018, 12:13:23 AM

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

Working on it for v0019-2.1

Kieros

newbie

Activity: 5

Merit: 0

Quote from: leenoox on January 17, 2018, 10:38:14 PM

Quote from: Kieros on January 17, 2018, 05:19:43 PM

Here is the report

Code:

 
Software info: 
Report ver    :  v0019-2.0.002 
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release 
nvOC (3main)  :  nvOC v0019-2.0 - Community Release   
1bash ver     :  v0019-2.0.003 
3main ver     :  v0019-2.0.006                   
5watchdog ver :  v0019-2.0.011    
6tempcontrol v:  v0019-2.0.003    
wtm switch ver:  v0019-2.0.0011   
Kernel        :  4.4.0-97-generic 
OS            :  Ubuntu 16.04.3 LTS 
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) 
nvidia driver :  387.34 
 
Hardware info: 
Motherboard   :  ASUS B250 MINING EXPERT  Rev X.0x 
BIOS ver.     :  0311 08/19/2017 
CPU Model     :  Pentium(R) CPU G4400 @ 3.30GHz 
CPU Cores     :  2 (Cores + Threads) 
Mem Total     :         3894436 kB 
Mem Free      :          246460 kB 
Swap Total    :               0 kB 
Swap Free     :               0 kB 
Ethernet      :  Intel I219-V

HDD and Partion info:
NAME     SIZE FSTYPE TYPE ROTA HOTPLUG TRAN   VENDOR   MODEL             REV MOUNTPOINT
sda    111.8G        disk    0       0 sata   ATA      KINGSTON SUV400S 96R9 
├─sda1     9M vfat   part    0       0                                       
└─sda2  13.7G ext4   part    0       0                                       /

VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 65
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 50

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 120
CORE_OVERCLOCK (global)....: 100
MEMORY_OVERCLOCK (global) .: 400
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 065
plusCPU ...................: YES
threadCOUNT ...............: 4

ZM_or_EWBF ................: ZM

COIN ......................: DUAL_ETH_PASL
DUAL_ETH_PASL_WORKER ................:
DUAL_ETH_PASL_ADDRESS ...............: ...
DUAL_ETH_PASL_POOL ..................:

WORK IN PROGRESS! Report script (beta release)

*** If posting the Report on bitcointalk.org forum please copy everything
between the

Code:

and

including the

Code:

 and [\code] tags.
    This will ensure proper alignment when posting the Report.

You have the on-board video enabled which causes lots of problems. Enter the bios and disable it. Connect your monitor to the GPU that is installed in the x16 (long) slot.

Thank you I will try this ASAP and let you know if it worked. However there is no monitor connected at all does it matter?

car1999

full member

Activity: 350

Merit: 100

Quote from: cryptokingjr on January 16, 2018, 04:04:01 PM

Quote from: papampi on January 16, 2018, 12:28:30 PM

Quote from: cryptokingjr on January 16, 2018, 09:54:46 AM

Quote from: papampi on December 20, 2017, 03:56:52 AM

SSD-USB resize and add swap - Guide - nvOC-v0019-2.0 Community Release.

Open Gparted, root password is miner1, Locate your drive, there are 2 partitions, a 9Mb fat, a 16Gb ext4 and a free unused space at the end.

Right click on the unused space, create new partition, "Partition Type : Swap" make the size you want (1Gb up to Ram size) grab and move it to the end of drive. Apply.

Right clcik on the primary 16gb partition, resize/move, resize it to the desired size (better to give it all). Apply.

Right click on the swap partition and get the info, copy the UUID.

open /etc/fstab with this command

Code:

gksudo gedit /etc/fstab

You will see a line which refers to a swap partition during installation ...

Some thing similar to this :

Code:

#swap was on /dev/sda5 during installation
UUID=cdba7b01-5ae6-4104-9a6e-f723b8bd87ac none            swap    sw              0       0

Change the UUID with the one you copied from newly made swap partition.

Save and close gedit.

Activate swap:

Code:

sudo swapon --all

It will read your fstab and enable the swap partition.

Check it with free command in terminal

Code:

#free

             total        used        free      shared  buff/cache   available
             
Mem:        8171388     3020388     2637404      142044     2513596     4647472

Swap:       8123388           0     8123388

Check partition size with

Code:

df -h

reboot

I was wondering if I was suppose to do the same when I'm actually using an HDD. It's not working, I'm not able to update! Can you help me ?

It should work on all HDD/SSD/USB
Some where you make a mistake, read and go through again.

Maybe I don't undestand where i should load the file ?

I'm just gonna tell you how I did it :

I load the File on gdrive.

Then I run the :

cd /home/m1/Downloads
wget https://www.dropbox.com/s/cyo86xoqotplges/nvOC-19-2-update
bash /home/m1/Downloads/nvOC-19-2-update

Then I change de 1bash file that been load and try to resize

and the error is :

(gedit:3854): Gtk-WARNING **: Calling Inhibit failed: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.gnome.SessionManager was not provided by any .service files

** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-spell-enabled not supported

** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-encoding not supported

** (gedit:3854): WARNING **: Set document metadata failed: Setting attribute metadata::gedit-position not supported

NEVER MIND

It finally worked. I just forget to turn on the swap on gparted

Thanks @PAPAMPI

as I know, raspberry pi auto expands the file system on the whole SD card during first boot, could nvOC support this awesome feature?

leenoox

full member

Activity: 200

Merit: 101

Quote from: papampi on January 17, 2018, 04:34:24 PM

Quote from: barista1992 on January 17, 2018, 03:36:20 PM

Hello, guys!

Need your help

mother - asus b250 mining expert
GPU - nvidia 1060 (6 gb) dual
memory - 8 gb
nvOC - 19.1-4

It should pass, if not force reboot the rig.
Its checking the SSD/USB.

Wow, haven't seen one of those monitors in a while Wink

leenoox

full member

Activity: 200

Merit: 101

Quote from: Kieros on January 17, 2018, 05:19:43 PM

Here is the report

Code:

 
Software info: 
Report ver    :  v0019-2.0.002 
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release 
nvOC (3main)  :  nvOC v0019-2.0 - Community Release   
1bash ver     :  v0019-2.0.003 
3main ver     :  v0019-2.0.006                   
5watchdog ver :  v0019-2.0.011    
6tempcontrol v:  v0019-2.0.003    
wtm switch ver:  v0019-2.0.0011   
Kernel        :  4.4.0-97-generic 
OS            :  Ubuntu 16.04.3 LTS 
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) 
nvidia driver :  387.34 
 
Hardware info: 
Motherboard   :  ASUS B250 MINING EXPERT  Rev X.0x 
BIOS ver.     :  0311 08/19/2017 
CPU Model     :  Pentium(R) CPU G4400 @ 3.30GHz 
CPU Cores     :  2 (Cores + Threads) 
Mem Total     :         3894436 kB 
Mem Free      :          246460 kB 
Swap Total    :               0 kB 
Swap Free     :               0 kB 
Ethernet      :  Intel I219-V

HDD and Partion info:
NAME     SIZE FSTYPE TYPE ROTA HOTPLUG TRAN   VENDOR   MODEL             REV MOUNTPOINT
sda    111.8G        disk    0       0 sata   ATA      KINGSTON SUV400S 96R9 
├─sda1     9M vfat   part    0       0                                       
└─sda2  13.7G ext4   part    0       0                                       /

VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 65
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 50

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 120
CORE_OVERCLOCK (global)....: 100
MEMORY_OVERCLOCK (global) .: 400
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 065
plusCPU ...................: YES
threadCOUNT ...............: 4

ZM_or_EWBF ................: ZM

COIN ......................: DUAL_ETH_PASL
DUAL_ETH_PASL_WORKER ................:
DUAL_ETH_PASL_ADDRESS ...............: ...
DUAL_ETH_PASL_POOL ..................:

WORK IN PROGRESS! Report script (beta release)

*** If posting the Report on bitcointalk.org forum please copy everything
between the

Code:

and

including the

Code:

 and [\code] tags.
    This will ensure proper alignment when posting the Report.

You have the on-board video enabled which causes lots of problems. Enter the bios and disable it. Connect your monitor to the GPU that is installed in the x16 (long) slot.

killeriq

newbie

Activity: 22

Merit: 0

Quote from: CryptAtomeTrader44 on January 02, 2018, 10:58:58 AM

To add Verge-Lyra2REv2 (XVG) to the selection of cryptocurrency in the 1bash and therefore also in the WTm switch:

1 / add this in the 1bash (just below the VTC variables you will copy / paste as a template):

Code:

# Verge-Lyra2REv2(XVG)
# ## No Need to add stratum+tcp:// to server address
XVG_WORKER="$WORKERNAME"
XVG_ADDRESS="Your_XVG_ADDRESS" 		# Bittrex Wallet Address (for me)
XVG_POOL="lyra2v2.mine.zpool.ca"  		# 1.75% fee but i think this pool is more reliable than other. If you find better, i want it.
XVG_PORT="4533"
XVG_INTENSITY="21"

Add this to the 0miner scrypt file (in the same way below the command to launch the VTC ccminer (and you can copy VTC but be careful to replace VTC_ by XVG_ in the whole command):

Code:

if [ $COIN == "XVG" ]
		 then 
			HCD='/home/m1/ASccminer/ccminer'
			ADDR="$XVG_ADDRESS.$XVG_WORKER"
			screen -dmSL miner $HCD -a lyra2v2 -o stratum+tcp://$XVG_POOL:$XVG_PORT -u $ADDR -p c=XVG -i $XVG_INTENSITY
fi

Finally, because there is more algo to mine XVG Coin, You have to disable the algo Groestl in your Whtatomine selection because in its GPU list, the WTM site lists both the XVG-Groestl and XVG-Lyra2Rev2 which makes a problem with the WTM_SWITCHER python script (need some modifications for multialgo coins recognization and listanng) ...

It will be a small change like NIcehash previously posted on this thread to filter correctly the difference but I have not enough time tonight to make this change and test.
Needless to say that if you mine another Goestl algo coins, you can't disable it in wtm page / URL ! Thus, think carefully about what you choose to do and decide whether or not to mine XVG in place of Groestl according to the best profit

To disable this algo in the WTM list, just click on the blue button dedicated to this algorithm and proceed as usual with the Whattomine URL by adding the .json just behind https://whattomine.com/coins after you have made your request in your browser.

To consult your pool balance : http://www.zpool.ca/?address=Your_XVG_ADDRESS

NB: if you think there is a better ccminer than alexis for lyra2rev2, I'm interested. Same for better pool.

EDIT : Other pools possibility :
https://www.ahashpool.com/ => fee 1%
http://pool.hashrefinery.com/ => fee 1.25%

seems like you missed setting for Algo specific OC

like this maybe?

Code:

  # lyra2vRev2
  if [ $COIN == "MONA" -o $COIN == "VTC" -o $COIN == "XVG" ]
  then
    ALGORITHM="LYRA2REV2"
    POWERLIMIT_WATTS=125
    __CORE_OVERCLOCK=135
    MEMORY_OVERCLOCK=-1200

Also getting this error: 'c=XVG' what is it? doesnt look right...

Code:

root@m1-desktop:~$./nvOC miner-log

*** Based on tpruvot@github ccminer
*** Originally based on Christian Buchner and Christian H. project
*** Include some of the work of djm34, sp, tsiv and klausT.

/home/m1/ASccminer/ccminer: unsupported non-option argument 'c=XVG' (see --help)
[2018-01-18 01:25:21] Starting on stratum+tcp://xvg-lyra.suprnova.cc:2595
[2018-01-18 01:25:22] NVML GPU monitoring enabled.
[2018-01-18 01:25:22] 12 miner threads started, using 'lyra2v2' algorithm.
[2018-01-18 01:25:22] Stratum difficulty set to 32 (0.12500)
[2018-01-18 01:25:34] GPU#3:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#0:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#7:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#11:Intensity set to 21, 2097152 cuda threads
[2018-01-18 01:25:34] GPU#1:Intensity set to 21, 2097152 cuda threads

Kieros

newbie

Activity: 5

Merit: 0

I do not think so...

Code:

GPU0 t=57C fan=52%, GPU1 t=53C fan=50%, GPU2 t=63C fan=37%, GPU3 t=63C fan=37%, GPU4 t=60C fan=56%, GPU5 t=56C fan=50%, GPU6 t=56C fan=50%, GPU7 t=55C fan=50%, GPU8 t=58C fan=0%, GPU9 t=56C fan=50%, GPU10 t=65C fan=41%, GPU11 t=59C fan=54%, GPU12 t=64C fan=40%
nvOC v0019-2.0 - Community Release

 nvOC v0019-2.0 - Community Release 


cpuminer killed (pid 11528)
ethdcrminer64 killed (pid 11892)


00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)


Wed Jan 17 15:31:55 2018       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.34                 Driver Version: 387.34                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    On   | 00000000:01:00.0 Off |                  N/A |
| 52%   57C    P0    45W / 120W |   2788MiB /  8114MiB |     96%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    On   | 00000000:04:00.0 Off |                  N/A |
| 50%   53C    P0    44W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    On   | 00000000:06:00.0 Off |                  N/A |
| 37%   61C    P0    40W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    On   | 00000000:08:00.0 Off |                  N/A |
| 37%   61C    P0    47W / 115W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    On   | 00000000:09:00.0 Off |                  N/A |
| 56%   58C    P0    45W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    On   | 00000000:0A:00.0 Off |                  N/A |
| 50%   56C    P0    48W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    On   | 00000000:0B:00.0 Off |                  N/A |
| 50%   54C    P0    44W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   7  GeForce GTX 1070    On   | 00000000:0C:00.0 Off |                  N/A |
| 50%   54C    P0    47W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   8  GeForce GTX 1070    On   | 00000000:0D:00.0 Off |                  N/A |
| 51%   56C    P0    45W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   9  GeForce GTX 1070    On   | 00000000:0E:00.0 Off |                  N/A |
| 50%   54C    P0    44W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|  10  GeForce GTX 1070    On   | 00000000:0F:00.0 Off |                  N/A |
| 41%   63C    P0    46W / 115W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|  11  GeForce GTX 1070    On   | 00000000:10:00.0 Off |                  N/A |
| 54%   58C    P0    47W / 120W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|  12  GeForce GTX 1070    On   | 00000000:11:00.0 Off |                  N/A |
| 40%   64C    P0    47W / 115W |   2485MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|    0       866      G   /usr/lib/xorg/Xorg                           178MiB |
|    0      2390      G   compiz                                       120MiB |
|    0     22451      G   /usr/bin/nvidia-settings                       3MiB |
+-----------------------------------------------------------------------------+


  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:10]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:11]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:12]) assigned value 0.

Power limit for GPU 00000000:01:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:04:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:06:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:08:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:09:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0A:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0B:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0C:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0D:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0E:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0F:00.0 was set to 120.00 W from 115.00 W.
Power limit for GPU 00000000:10:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:11:00.0 was set to 120.00 W from 115.00 W.
All done.


LAUNCHING:  plusCPU

plusCPU process in guake terminal Tab (f12)


LAUNCHING:  MINER TEMPCONTROL

process in guake terminal Tab (f12), ~/nvOC temp-log















































^CnvOC v0019-2.0 - Community Release

 nvOC v0019-2.0 - Community Release 


cpuminer killed (pid 27568)





00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)


Wed Jan 17 15:32:46 2018       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 387.34                 Driver Version: 387.34                    |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1070    On   | 00000000:01:00.0 Off |                  N/A |
| 50%   48C    P0    48W / 120W |    305MiB /  8114MiB |     78%      Default |
+-------------------------------+----------------------+----------------------+
|   1  GeForce GTX 1070    On   | 00000000:04:00.0 Off |                  N/A |
|  0%   51C    P0    36W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   2  GeForce GTX 1070    On   | 00000000:06:00.0 Off |                  N/A |
| 33%   53C    P0    39W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   3  GeForce GTX 1070    On   | 00000000:08:00.0 Off |                  N/A |
| 31%   52C    P0    41W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   4  GeForce GTX 1070    On   | 00000000:09:00.0 Off |                  N/A |
| 51%   48C    P0    37W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   5  GeForce GTX 1070    On   | 00000000:0A:00.0 Off |                  N/A |
|  0%   51C    P0    36W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   6  GeForce GTX 1070    On   | 00000000:0B:00.0 Off |                  N/A |
|  0%   53C    P0    38W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   7  GeForce GTX 1070    On   | 00000000:0C:00.0 Off |                  N/A |
|  0%   54C    P0    37W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   8  GeForce GTX 1070    On   | 00000000:0D:00.0 Off |                  N/A |
|  0%   48C    P0    35W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|   9  GeForce GTX 1070    On   | 00000000:0E:00.0 Off |                  N/A |
|  0%   53C    P0    36W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|  10  GeForce GTX 1070    On   | 00000000:0F:00.0 Off |                  N/A |
| 36%   54C    P0    39W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|  11  GeForce GTX 1070    On   | 00000000:10:00.0 Off |                  N/A |
| 51%   48C    P0    36W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
|  12  GeForce GTX 1070    On   | 00000000:11:00.0 Off |                  N/A |
| 37%   55C    P0    40W / 120W |      2MiB /  8114MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|    0       866      G   /usr/lib/xorg/Xorg                           184MiB |
|    0      2390      G   compiz                                       120MiB |
|    0     22451      G   /usr/bin/nvidia-settings                       3MiB |
+-----------------------------------------------------------------------------+


  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:0]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:1]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:2]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:3]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:4]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:5]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:6]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:7]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:8]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:9]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:10]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:11]) assigned value 0.
  Attribute 'GPULogoBrightness' (m1-desktop:0[gpu:12]) assigned value 0.

Power limit for GPU 00000000:01:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:04:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:06:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:08:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:09:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0A:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0B:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0C:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0D:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0E:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:0F:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:10:00.0 was set to 120.00 W from 120.00 W.
Power limit for GPU 00000000:11:00.0 was set to 120.00 W from 120.00 W.
All done.


LAUNCHING:  plusCPU

plusCPU process in guake terminal Tab (f12)


LAUNCHING:  MINER TEMPCONTROL

process in guake terminal Tab (f12), ~/nvOC temp-log



Auto Start Miner Set to YES

LAUNCHING:  MINER WATCHDOG

process in guake terminal Tab (f12), ~/nvOC wdog-log


LAUNCHING:  MINER
    
    
    SCREEN -dmSL miner /home/m1/eth/claymore/latest/ethdcrminer64 -epool eu1.ethermine.org:4444 -ewal 0xecbdb419ecccc82139728c1fd5b9017019cf9ec9.065 -epsw x -dpool stratum+tcp://mine.pasl.fairpool.xyz:4009 -dwal 3GhhbokyR3MABVthVnso9XznZ3h3gMyyRjSKdeypQ2aZSCUKwAcnvB9hRQ8qsYebUfQuquyoyLYoMYeto6pywDPNwEkyYzcuo2SSKu..065 -dpsw x -dcoin pasc -allcoins 1 -allpools 1 -dbg -1
    
 PASC: Stratum - Failed to connect, retry in 20 sec...
ETH: 01/17/18-15:31:36 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 344.830 Mh/s, Total Shares: 148, Rejected: 0, Time: 00:29
ETH: GPU0 26.683 Mh/s, GPU1 26.351 Mh/s, GPU2 26.442 Mh/s, GPU3 26.367 Mh/s, GPU4 26.364 Mh/s, GPU5 26.644 Mh/s, GPU6 26.685 Mh/s, GPU7 26.587 Mh/s, GPU8 26.305 Mh/s, GPU9 26.432 Mh/s, GPU10 26.694 Mh/s, GPU11 26.679 Mh/s, GPU12 26.598 Mh/s
 PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
GPU0 t=57C fan=52%, GPU1 t=53C fan=50%, GPU2 t=63C fan=37%, GPU3 t=63C fan=37%, GPU4 t=60C fan=56%, GPU5 t=56C fan=50%, GPU6 t=56C fan=50%, GPU7 t=55C fan=50%, GPU8 t=58C fan=0%, GPU9 t=56C fan=50%, GPU10 t=65C fan=41%, GPU11 t=59C fan=54%, GPU12 t=64C fan=40%
Cannot resolve 'mine.pasl.fairpool.xyz'
 PASC: Stratum - Cannot connect to mine.pasl.fairpool.xyz:4009
 PASC: Stratum - Failed to connect, retry in 20 sec...

����������������������������������������������������������������ͻ
�     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.2      �
����������������������������������������������������������������ͼ

ETH: 1 pool is specified
Main Ethereum pool is eu1.ethermine.org:4444
PASC: 1 pool is specified
Main Pascal pool is mine.pasl.fairpool.xyz:4009
AMD OpenCL platform not found 
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools, "e" or "d" to select current pool 
CUDA initializing...

NVIDIA Cards available: 13 
CUDA Driver Version/Runtime Version: 9.1/8.0
GPU #0: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #1: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #2: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #3: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #4: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #5: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #6: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #7: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #8: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #9: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #10: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #11: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

GPU #12: GeForce GTX 1070, 8114 MB available, 15 compute units, capability: 6.1

Total cards: 13 
ETH: Stratum - connecting to 'eu1.ethermine.org' <188.165.239.100> port 4444
ETH: Stratum - Connected (eu1.ethermine.org:4444)
ETH: Authorized
DUAL MINING MODE ENABLED: ETHEREUM+PASCAL
ETH: eth-proxy stratum mode
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
"-allcoins" option is set, default pools will be used for devfee, check "Readme" file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

Setting DAG epoch #164...
Cannot resolve 'mine.pasl.fairpool.xyz'
 PASC: Stratum - Cannot connect to mine.pasl.fairpool.xyz:4009
 PASC: Stratum - Failed to connect, retry in 20 sec...
ETH: 01/17/18-15:34:01 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
 PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
Setting DAG epoch #164 for GPU0
Setting DAG epoch #164 for GPU1
Create GPU buffer for GPU0
Setting DAG epoch #164 for GPU2
Create GPU buffer for GPU2
Setting DAG epoch #164 for GPU3
Create GPU buffer for GPU3
Setting DAG epoch #164 for GPU5
Create GPU buffer for GPU5
Setting DAG epoch #164 for GPU7
Create GPU buffer for GPU7
Setting DAG epoch #164 for GPU9
Create GPU buffer for GPU9
Setting DAG epoch #164 for GPU11
Setting DAG epoch #164 for GPU12
Create GPU buffer for GPU12
Setting DAG epoch #164 for GPU4
Create GPU buffer for GPU4
Setting DAG epoch #164 for GPU8
Create GPU buffer for GPU8
Create GPU buffer for GPU11
Create GPU buffer for GPU1
Setting DAG epoch #164 for GPU6
Create GPU buffer for GPU6
Setting DAG epoch #164 for GPU10
Create GPU buffer for GPU10
ETH: 01/17/18-15:34:03 - New job from eu1.ethermine.org:4444
ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00
ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
 PASC - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0
 PASC: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s, GPU7 0.000 Mh/s, GPU8 0.000 Mh/s, GPU9 0.000 Mh/s, GPU10 0.000 Mh/s, GPU11 0.000 Mh/s, GPU12 0.000 Mh/s
GPU9 DAG creation time - 7048 ms
Setting DAG epoch #164 for GPU9 done
GPU12 DAG creation time - 7034 ms
Setting DAG epoch #164 for GPU12 done
GPU0 DAG creation time - 7036 ms
Setting DAG epoch #164 for GPU0 done
GPU7 DAG creation time - 7051 ms
Setting DAG epoch #164 for GPU7 done
GPU10 DAG creation time - 7024 ms
Setting DAG epoch #164 for GPU10 done
GPU6 DAG creation time - 7037 ms
Setting DAG epoch #164 for GPU6 done
GPU11 DAG creation time - 7042 ms
Setting DAG epoch #164 for GPU11 done
GPU8 DAG creation time - 7041 ms
Setting DAG epoch #164 for GPU8 done
GPU4 DAG creation time - 7075 ms
Setting DAG epoch #164 for GPU4 done
GPU5 DAG creation time - 7086 ms
Setting DAG epoch #164 for GPU5 done
GPU2 DAG creation time - 7103 ms
Setting DAG epoch #164 for GPU2 done
GPU1 DAG creation time - 7070 ms
Setting DAG epoch #164 for GPU1 done
GPU3 DAG creation time - 7115 ms

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: Kieros on January 17, 2018, 05:19:43 PM

Here is the report

Code:

 
Software info: 
Report ver    :  v0019-2.0.002 
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release 
nvOC (3main)  :  nvOC v0019-2.0 - Community Release   
1bash ver     :  v0019-2.0.003 
3main ver     :  v0019-2.0.006                   
5watchdog ver :  v0019-2.0.011    
6tempcontrol v:  v0019-2.0.003    
wtm switch ver:  v0019-2.0.0011   
Kernel        :  4.4.0-97-generic 
OS            :  Ubuntu 16.04.3 LTS 
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) 
nvidia driver :  387.34 
 
Hardware info: 
Motherboard   :  ASUS B250 MINING EXPERT  Rev X.0x 
BIOS ver.     :  0311 08/19/2017 
CPU Model     :  Pentium(R) CPU G4400 @ 3.30GHz 
CPU Cores     :  2 (Cores + Threads) 
Mem Total     :         3894436 kB 
Mem Free      :          246460 kB 
Swap Total    :               0 kB 
Swap Free     :               0 kB 
Ethernet      :  Intel I219-V

HDD and Partion info:
NAME     SIZE FSTYPE TYPE ROTA HOTPLUG TRAN   VENDOR   MODEL             REV MOUNTPOINT
sda    111.8G        disk    0       0 sata   ATA      KINGSTON SUV400S 96R9 
├─sda1     9M vfat   part    0       0                                       
└─sda2  13.7G ext4   part    0       0                                       /

VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 65
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 50

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 120
CORE_OVERCLOCK (global)....: 100
MEMORY_OVERCLOCK (global) .: 400
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 065
plusCPU ...................: YES
threadCOUNT ...............: 4

ZM_or_EWBF ................: ZM

COIN ......................: DUAL_ETH_PASL
DUAL_ETH_PASL_WORKER ................:
DUAL_ETH_PASL_ADDRESS ...............: ...
DUAL_ETH_PASL_POOL ..................:

WORK IN PROGRESS! Report script (beta release)

*** If posting the Report on bitcointalk.org forum please copy everything
between the

Code:

and

including the

Code:

 and [\code] tags.
    This will ensure proper alignment when posting the Report.

When gnome terminal starts it should show the OC values and power limit that are applying to cards
Does it shows them on your system?

run

Code:

miner-restart

and check it

Kieros

newbie

Activity: 5

Merit: 0

Here is the report

Code:

 
Software info: 
Report ver    :  v0019-2.0.002 
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release 
nvOC (3main)  :  nvOC v0019-2.0 - Community Release   
1bash ver     :  v0019-2.0.003 
3main ver     :  v0019-2.0.006                   
5watchdog ver :  v0019-2.0.011    
6tempcontrol v:  v0019-2.0.003    
wtm switch ver:  v0019-2.0.0011   
Kernel        :  4.4.0-97-generic 
OS            :  Ubuntu 16.04.3 LTS 
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4) 
nvidia driver :  387.34 
 
Hardware info: 
Motherboard   :  ASUS B250 MINING EXPERT  Rev X.0x 
BIOS ver.     :  0311 08/19/2017 
CPU Model     :  Pentium(R) CPU G4400 @ 3.30GHz 
CPU Cores     :  2 (Cores + Threads) 
Mem Total     :         3894436 kB 
Mem Free      :          246460 kB 
Swap Total    :               0 kB 
Swap Free     :               0 kB 
Ethernet      :  Intel I219-V

HDD and Partion info:
NAME     SIZE FSTYPE TYPE ROTA HOTPLUG TRAN   VENDOR   MODEL             REV MOUNTPOINT
sda    111.8G        disk    0       0 sata   ATA      KINGSTON SUV400S 96R9 
├─sda1     9M vfat   part    0       0                                       
└─sda2  13.7G ext4   part    0       0                                       /

VGA info:
00:02.0 VGA compatible controller: Intel Corporation Device 1902 (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
06:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0a:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0b:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
0f:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
10:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
11:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.003
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 65
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 50

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: STABLE
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 120
CORE_OVERCLOCK (global)....: 100
MEMORY_OVERCLOCK (global) .: 400
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: YES
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 065
plusCPU ...................: YES
threadCOUNT ...............: 4

ZM_or_EWBF ................: ZM

COIN ......................: DUAL_ETH_PASL
DUAL_ETH_PASL_WORKER ................:
DUAL_ETH_PASL_ADDRESS ...............: ...
DUAL_ETH_PASL_POOL ..................:

WORK IN PROGRESS! Report script (beta release)

*** If posting the Report on bitcointalk.org forum please copy everything
between the

Code:

and

including the

Code:

 and [\code] tags.
    This will ensure proper alignment when posting the Report.

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: Kieros on January 17, 2018, 04:58:01 PM

I have started to use this mining software, its awesome.

I have 13x gtx 1070 but it seems the OC does not work at all what am I doing wrong?
I tried doing it with the 1 BASH the only thing working is the powerlimit.

Also cards stay in state P2

I tried Nvidia settings but no overclocking there.

Since I am not so great at linux systems any help is greatly appriciated.

Thanks in advance!

Please run this command and post the output:

Code:

./nvoc report

Kieros

newbie

Activity: 5

Merit: 0

I have started to use this mining software, its awesome.

I have 13x gtx 1070 but it seems the OC does not work at all what am I doing wrong?
I tried doing it with the 1 BASH the only thing working is the powerlimit.

Also cards stay in state P2

I tried Nvidia settings but no overclocking there.

Since I am not so great at linux systems any help is greatly appriciated.

Thanks in advance!

papampi

full member

Activity: 686

Merit: 140

Linux FOREVER! Resistance is futile!!!

Quote from: barista1992 on January 17, 2018, 03:36:20 PM

Hello, guys!

Need your help

mother - asus b250 mining expert
GPU - nvidia 1060 (6 gb) dual
memory - 8 gb
nvOC - 19.1-4

It should pass, if not force reboot the rig.
Its checking the SSD/USB.

barista1992

sr. member

Activity: 518

Merit: 251

Trustee Wallet Signature Bounty

Hello, guys!

Need your help

mother - asus b250 mining expert
GPU - nvidia 1060 (6 gb) dual
memory - 8 gb
nvOC - 19.1-4

salfter

hero member

Activity: 651

Merit: 501

My PGP Key: 92C7689C

I had been running v0.19 for the past few months, but an auto-update broke things such that the miners wouldn't work. I recently updated to v0.19-1.4 and found it was mostly working, but whenever it started trying to mine Feathercoin (I use my MiningPoolHub switcher), the miner still didn't kick in and the rig would sit idle until (1) another coin became more profitable or (2) I noticed by the lack of fan noise that the rig was idle.

I tried firing up KTccminer manually a little bit ago, but found that it ended almost right away with an illegal-instruction error. I'm rebuilding it right now (make clean && make -j3); I'm guessing the rebuilt miner will work properly and I'll be able to reenable Feathercoin (currently the most profitable, as it happens). It was configured to use -march=native. My mining rig uses a Celeron G3920; odds are the miner was last built on a Core iSomethingorother with some additional instructions beyond what the Celeron supports.

Pre-post update: it looks like make clean && make -j3 was insufficient, as it runs a couple seconds longer before it segfaults. INSTALL recommends running build.sh, so I'm doing that.

Update: Now I'm getting this set of errors:

Code:

ccminer 8.13-KlausT (64bit) for nVidia GPUs
Compiled with GCC 5.4 using Nvidia CUDA Toolkit 8.0

Based on pooler cpuminer 2.3.2 and the tpruvot@github fork
CUDA support by Christian Buchner, Christian H. and DJM34
Includes optimizations implemented by sp-hash, klaust, tpruvot and tsiv.

[2018-01-17 14:34:55] Starting Stratum on stratum+tcp://hub.miningpoolhub.com:20510
[2018-01-17 14:34:55] NVML GPU monitoring enabled.
0
1
[2018-01-17 14:34:55] GPU #2: waiting for data
[2018-01-17 14:34:55] GPU #1: waiting for data
[2018-01-17 14:34:55] 4 miner threads started, using 'neoscrypt' algorithm.
[2018-01-17 14:34:55] GPU #0: waiting for data
[2018-01-17 14:34:55] GPU #3: waiting for data
[2018-01-17 14:34:55] Stratum difficulty set to 2048
[2018-01-17 14:34:55] Stratum difficulty set to 523.054
Cuda error in func 'neoscrypt_cpu_init_2stream' at line 1431 : invalid device symbol.
Cuda error in func 'scanhash_neoscrypt' at line 96 : driver shutting down.
Segmentation fault

I went looking for another miner to handle NeoScrypt and found NSGminer:

https://bitcointalksearch.org/topic/nsgminer-v094-the-fastest-neoscrypt-gpu-miner-712650

Code:

git clone https://github.com/ghostlander/nsgminer
cd nsgminer
./configure CFLAGS="-O2 -fomit-frame-pointer -DASM -DOPT -DMINER_4WAY -DSHA256 -march=native" --disable-adl --disable-nvml --without-curses
make -j3

This miner normally tries to manage clock and fan settings by itself; we disable those so the other parts of nvOC that handle those still work. curses (full-screen interface) support is also disabled.

The part of 3main that writes mph_conf.json then needs to be modified:

Code:

"NeoScrypt":
{
"bin": "/home/m1/nsgminer/nsgminer -k neoscrypt -g 1 -w 64 -I 15 -o stratum+tcp://{HOST}:{PORT} -O {NAME}.{MINER}:x",
...

(If you're not using my MiningPoolHub auto-switcher, make the equivalent change elsewhere.)

In limited testing, NSGminer appears to run a little bit faster on my 1070s than KTccminer did, but more extensive benchmarking (to include power measurements) is needed.

Topic: [ mining os ] nvoc - page 73. (Read 418542 times)