Topic: [Mining OS] SimpleMining.net - Manage Your GPU farm the easy way! (30 days free) - page 19. (Read 835786 times)

Please share Your support id, i will take a look.

Well done,  fans of my rx 580 rig stop spinning and all GPUs hit 94 degrees for over 3 hours. I wonder what the consequences will be in the future for my gpus.
It is the same situation like a few years ago when you implemented Dag Fix for AMD gpus without informing about it in advance
back then my power supplies changed the power consumption from 900w to 1300w and all the luck that nothing burned.Next time please think about two rows before doing something like this

Dashboard update
- phoenixminer 5.4 and older stopped to work from epoch 500 on ethereum. Therefore i upgraded everyones phoenixminer group from 5.4 to 6.2c

Miners update
- lolminer-v1.52 (New memory management for Ergo on Nvidia GPUs. Fixes the miner not working on current epoch on latest release and fixes the requirement to restart the miner on Ergo epoch change. Added 2 more epochs on Ergo for 3G AMD GPUs. Slight changes to LHR unlocker to improve the unlocker stability. Removed: 2G zombie modes for Ergo on AMD. Removed: Support for mining Ton in single and dual mining modes.  ote that existing dual mining configurations will automatically launch Eth / Etc / Ubiq only mode, so existing configurations will not be broken. Fixed multiple issues that caused the miner not to properly reconnect when it took too many attempts. Added an internal stratum watchdog, that will restart the entire stratum stack internally, when not connected for a longer while.Fixed a potential segmentation fault at startup. Fixed a segmentation fault when Alephium dual mining is requested, but the dual worker did not get authorized)
- teamblackminer-v1.64 (Added support for Vertcoin mining (Verthash algo) on AMD and NVIDIA GPUs. Fix issues in Zil mining)
- teamredminer-v0.10.2 (Tweaked Polaris ethash tuning to work better with the new smooth-power setup. Fix for Autolykos crashing on Polaris and 4GB GPUs. Fix for Eth+Ton dual mining crashes with new smooth-power setup)
- xmrig-v6.18.0 (Removed deprecated AstroBWTv1 and v2. Monero v15 network upgrade support. Fixed ZMQ debug log. Improved daemon ZMQ mining stability. Removed old AstroBWT algorithm)

Miners update
- gminer-v3.01 (Fixed RavenCoin mining errors. Fixed displaying of pool hashrate for RavenCoin)

Miners update
- nanominer-v3.6.5 (90% LHR unlock for Nvidia RTX 3050 & 3080-12gb. Recommended drivers: 510.x and required Admin/root privileges enabled. 90% LHR unlock does not work 515.x at this moment)
- srbminer-multi-v0.9.7 (Performance increase and lower power consumption on 'kaspa' and 'heavyhash' algorithm for RDNA2 GPU's. Added limited support for some algorithm's on Vega's (gfx900) for drivers newer than 20.40. OpenCL variables will be now set automatically from miner)
- teamredminer-v0.10.1 (Reworked smooth power for improved stability, primarily on Polaris and Vega gpus. Added --eth_smooth_power to control the smooth power scheduling feature. Fixed bug causing Autolykos hashrate drop on VIIs)

Miners update
- bzminer-v9.2.1 (Optimized dual mining for eth/etc + kaspa and eth/etc + alph (Nvidia only, experimental). Fixed LHR issue when mining non-LHR algos (kaspa/alph). Added oc_reset_all command line argument. Added reboot_after_watchdog_restarts option
  advanced_config is now enabled by default. Can mine Zil with any algo. Zil dag creation only happens once. Always mine the Zil windows when alternate/split mining. Ixi looks at total memory instead of available memory when determining intensity. Fixed throttle notification power limit always yellow. Fixed autofan parsing as 0 for intenger only values. Fixed Alephium issue when multiple solutions are found at once. Added extra_dev_fee to command line)

Miners update
- nanominer-v3.6.4 (Improved LHR unlock stability on old drivers. Recommended drivers are still 510.x and Admin/root privileges are required to unlock. 100% LHR unlock does not work on newer drivers than 510.x at this moment)

---

Miners update
- miniz-v1.8z3 (Added support for AMD GPUs 6600/6800/6900 (XT). Added support for AMD 590. Reduced stale shares on Aion. Improved stability. Minor bug fixes)

Dashboard update
- added mac address into system information in rig details

Miners update
- srbminer-multi-v0.9.6 (Added algorithm 'kaspa' (KAS - Kaspa coin), fee 1.00%. Small performance increase on 'heavyhash' algorithm for RDNA2 GPU's. Lower power consumption on 'heavyhash' algorithm for RDNA2 GPU's. Minor bug fixes)

Dashboard update
- NEW feature  - added GPU ASIC temperature and GPU memory temperature to GPU charts
- New feature for bigger farms - ability to mass rename rigs using csv (its under Actions-Commands-Mass rename)

Miners update
- gminer-v2.99 (changed display of job/share difficulty to match mining pools (specially for solo mining))

Miners update
- gminer-v2.98 (Optimized RavenCoin mining. Decreased miner size (-30 MB). Removed BeamHash algorithm)

Dashboard update
- added new Terminal BETA version which is faster. It will replace old SSH terminal someday.

Miners update
- nbminer-nebutech-v42.2 (Ethash Add a new option --lhr-mode to select LHR unlock mode. --lhr-mode 1 is the default mode and is the same as which in v41.5. Try to use --lhr-mode 2 if stability issue encountered in mode 1. LHR v3 GPUs can only use mode 1. Ethash extend LHR unlocker to work with old driver versions. Starting from driver  v515.x, LHR unlocker no longer works, make sure not to use these new driver versions. Ethash small hashrate improvement on Nvidia GPUs. Add GDDR6X memory temp in summary table. Add Nvidia driver versoin in summary table. Ethash add eth_submitHashrate for nicehash (EthereumStratum) protocol. If Overclock applies through nbminer, reset settings to stock when miner exit)

Update v1335
- NEW feature - when you change miner on multiple rigs then all of them would normally download package from internet at once. This was stupid and caused load on your internet connection plus long time to download on slower internet connection or on high number of rigs. With this new feature only few of your rigs will download package from internet and then they will share this package locally via LAN network to each other. This feature works automatically and no additional configuration is needed as always In case of any issues with that feature, please contact support
- Changed default download repository. If there will be any low speed issues please let us know !
- NTP servers changed to cloud flare

Miners update
- t-rex-v0.26.4 (LHR unlock of 3080 12GB and 3050 (~90%). Fixed issue with miner sometimes takes too long to shut down on multi-GPU rigs)

---

Miners update
- nbminer-nebutech-v42.0 (Ethash Extend LHR unlocker work with old driver versions. All previous drivers should work until 515.x. Ethash Improve LHR unlocker stability. Ethash small hashrate improvement on Nvidia. Add GDDR6X memory temp in summary table. Add GPU RAM type and GPU RAM vendor in log. Add Nvidia driver versoin in summary table. If Overclock applies through nbminer, reset settings to stock when miner exit. NBMiner versions older than v39.5 will run into issue when ETH reaches EPOCH 520 (Approx mid September). Please make sure to upgrade to a newer version before that if ETH is still with POW)
- srbminer-multi-v0.9.5 (Added algorithm yescryptr8, yescryptr16, yescryptr32, frkhash. Lowered devfee for autolykos2, blake3_alephium. Small performance increase on autolykos2 for RDNA2. Small performance increase on dynamo for GPU's. A little bit faster dataset creation on autolykos2 for some GPU's. A little bit lower power consumption on autolykos2 for Ellesmere GPU's. A little bit lower power consumption on ethash/etchash for RDNA2. Added parameter aliases for --algorithm, --cpu-threads, --password, --pool, --wallet ( -a, -t, -p, -o, -u ). Parameter --diff-factor now accepts values in decimal format too. Removed support for older GPU's (pitcairn, tahiti, hawaii, fiji, tonga). Minor bug fixes)

---

Miners update
- nbminer-nebutech-v42.1 (Fix ethash LHR unlocker can not unlock on certain GPUs)

Miners update
- lolminer-v1.51a (Improved / Fixed Nvidia memory management. Other improvements)
- nanominer-v3.6.3 (100% LHR unlock for Nvidia LHR v1 and LHR v2 GPUs. Recommended drivers: 510.x and Admin/root privileges are required to unlock)

Miners update
- gminer-v2.96 (LHR unlock for oldest drivers (fixed "LHR unlock failed" error on old drivers))
- teamredminer-v0.10.0 (R-mode introduced for Vegas/VIIs/Navi10/Big Navi. Smooth power transitions for ethash family algos. Added support for multiple --api_listen and --api_listen2 endpoints (up to 8 total). Added argument --gpu_sdma=on|off for special situations. For example, BC-250 needs --gpu_sdma=off)

---

Miners update
- lolminer-v1.51 (Extended working range of 100% LHR unlocker to 470 and 472 drivers. On 515.x drivers unlock currently does not work. New parameter for dualmining: --dualfactor. Fixed bug causing the Zombie mode on 5G Pascal GPUs (1060 5G, P2000) not to work. Minor LHR unlocker stability improvements)

---

Miners update
- bzminer-v9.1.4 (Fixed 100% LHR Unlock v1 not working on older drivers <511.x. Core, memory, and power limit throttle notifications. Added --cache_dag for eth + zil mining. Fixed ezil protocol. Added --update_frequency_shares x to update display only after x shares found. Fixed autofan temperature range not working correctly. Fixed Ixian not reconnecting to pool properly. Fixed timings name column not expanding properly. Added ethzil scripts)

Sorry i lost notifications about new reply here...

This is resolved ? I believe so.

If there is issue with that please send message to [email protected] with again details what was and is wrong

No idea. Pls try to ask teamredminer.

Can you describe exactly your use case and what do You want to achieve ? Better send email to [email protected] as i will be able to check your rig.