mining problem on eth | Bitcointalksearch.org

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 13, 2016, 05:49:51 PM

hey i just solved at the moment my problem all my problems come about this fking AMD drivers i have try a lot of old driver and i found the 15.11.1 nad its the best one i had my hashrate speed corrected and pool found my shares thank you for the time you spend to help me

Good I just did an Amd driver install an hour ago.

Amd driver corruption issues are very common.

ep1989

member

Activity: 78

Merit: 10

hey i just solved at the moment my problem all my problems come about this fking AMD drivers i have try a lot of old driver and i found the 15.11.1 nad its the best one i had my hashrate speed corrected and pool found my shares thank you for the time you spend to help me

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 13, 2016, 11:29:42 AM

guys someone with many miners on same router can tell me if i need to make changes on router upnp (a friend told me if i can sync to the pool with my other miners is because the pool ping on same port and they cannot be all connected on same port ) is that true ?

You need a Euro guy from France to answer.

You are using a French internet service. So I don not know much about their setup what they let pass do they bump you or do not bump you.

I use cablevision's optimum online service.

They would shut me down every 4 to 6 days if I ran a bitcoin node.

But they would allow many miners to connect for weeks on end no issues.

I have had up to nine miners connect to kano.is pool but not more as I would be bumped at nine.

You only have three machines you should be able to hook them up.

ep1989

member

Activity: 78

Merit: 10

guys someone with many miners on same router can tell me if i need to make changes on router upnp (a friend told me if i can sync to the pool with my other miners is because the pool ping on same port and they cannot be all connected on same port ) is that true ?

Unacceptable

legendary

Activity: 2212

Merit: 1001

Try looking thru this other forum,I found alot of good info there Wink

https://forum.ethereum.org/categories/mining

BTW,I use driver sweeper to clear my registry when I change vid drivers,just be sure NOT to check any boxes for chipset & other necessary things,just the vid drivers.

http://www.guru3d.com/content_page/guru3d_driver_sweeper.html

ep1989

member

Activity: 78

Merit: 10

ty for reply i hae tried it 5 times and catalyst detect my card as vga standard (so card not detected and can't mine ) so i pull back to 16.3.2. I have try all drivers atm no one fix my problem sadly :s:ss:s

Unacceptable

legendary

Activity: 2212

Merit: 1001

My 380 does as high as 22mhs,average is 19+mhs Wink

I don't have any multi GPU rigs so I can't help with that Sad

I do know crimson 16.4.1 is not good,it gives a lower hash rate,my Sapphire 380 4gig likes 15.15.1004 on Win7 64bit,why ?? I have no idea,it just does Cheesy

http://support.amd.com/en-us/kb-articles/Pages/AMD-Radeon-300-Series.aspx#

Go to this section:
The AMD Catalyst™ Driver for AMD Radeon™ 300 Series products can be downloaded from the following link:

ep1989

member

Activity: 78

Merit: 10

okey thanks for the time you did spend to help me and have a good night

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 12, 2016, 10:31:13 PM

im from france

and yes 47 54 on 4 card rig doesn't know why my 5th card doesn't work yet but i will fixe it really really soon anyway maybe can u said me why i get 19 mh/s with my 1st computer with only one card and around 13 m/hs pet card on 2nd pc and on the rig with 4 card ( 51/4= 12.75) all mining comparated show r9 380X at 20 mh/s why did i mine so slow ??

I am sorry but I need to go to work tomorrow so I have to sleep.

I will try to figure out more tomorrow.

r9 380 gear should do 18 to 22 each

so 4 = 72 to 88

do not know answer right now. Let me sleep on it.

ep1989

member

Activity: 78

Merit: 10

im from france

and yes 47 54 on 4 card rig doesn't know why my 5th card doesn't work yet but i will fixe it really really soon anyway maybe can u said me why i get 19 mh/s with my 1st computer with only one card and around 13 m/hs pet card on 2nd pc and on the rig with 4 card ( 51/4= 12.75) all mining comparated show r9 380X at 20 mh/s why did i mine so slow ??

i have change to the eu1

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 12, 2016, 10:20:53 PM

yes i understand what you mean and i see the same column and i know its about hashrate but after 15min if you check my adress 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 i still have'nt done any share if we look at the pool stats even my console saying i did . Its like im not connected to the pool

be patience first connection is slow

are your still showing the 47 -51 mhs number ?

if so you are connected.

what country are you in?

Europe

ethminer -G-F http://eu1.nanopool.org:8888
ethminer -G-F http://eu2.nanopool.org:8888

USA Canada

us-east1.nanopool.org:8888
us-west1.nanopool.org:8888

asia1.nanopool.org:8888

ep1989

member

Activity: 78

Merit: 10

yes i understand what you mean and i see the same column and i know its about hashrate but after 15min if you check my adress 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 i still have'nt done any share if we look at the pool stats even my console saying i did . Its like im not connected to the pool

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

your photo has a column

it is 48xxxxx to 51xxxxx you are doing 48 to 51 mh it will show up

see the minor running and the column with 29- 34xxxxxxx

same miner a minute different column with 29-34xxxxxxx

and the web site has a miner with 30- 33mh

ep1989

member

Activity: 78

Merit: 10

okey i have remove it and i will let him work for 10/15 min and tell you back what's happend in 15/20 min

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 12, 2016, 09:54:06 PM

nop still not working i did one with my adresse and its not working either look im working atm and their is no share 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 this is my account info on nanopool look here http://hpics.li/f97e19a

stop pause < no pause in the batch file

you have to run it 10 to 15 minutes and it will show

no pause let it run for a while see below

ep1989

member

Activity: 78

Merit: 10

nop still not working i did one with my adresse and its not working either look im working atm and their is no share 0x3a7c6f2116b384c8afe34b083f33ba5f3b071c85 this is my account info on nanopool look here http://hpics.li/f97e19a

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 12, 2016, 09:44:39 PM

yes im new and haven't used yet img insertion on forum i don't post many img Cheesy

so I think it worked.

so do a batch file with

ethminer -G -F http://us-east1.nanopool.org:8888/your number / test/and your email

then check the stats in ten minutes or so.

let me know if you got it working.

if it does then use the other pc with this bat. file

ethminer -G -F http://us-east1.nanopool.org:8888/your number/test2/and your email

so 1 pc will keep the old pool

2 pc will have new pool test
3 pc will have new pool test2

and if it crashes they will send an email to you

good luck

ep1989

member

Activity: 78

Merit: 10

yes im new and haven't used yet img insertion on forum i don't post many img Cheesy

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 12, 2016, 09:39:18 PM

check my scrreen i've lauched it (if my screen work )

http://hpics.li/b533198

you are new so here is img

looks like you paused it >

I would rather you ran it so I would see it really go to my account for a few minutes. Maybe a grand total of 0.0001 ETH coin

But it does look like it took. So do a new batch file with your account not mine and then let me know if it took it take 5 to 10 minutes to show on this link

http://nanopool.org/account/ use your eth number not mine to look up your stats ~~0x3ef297e47404a771139472b93621f82c8a832857#~~

ep1989

member

Activity: 78

Merit: 10

[/url][/img] check my scrreen i've lauched it (if my screen work )

http://hpics.li/b533198

Topic: mining problem on eth (Read 1143 times)