mining problem on eth - page 2. | Bitcointalksearch.org

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 12, 2016, 09:10:02 PM

pc 1= miners okey
pc 2= no miners
pc3 = no miners

pc 1 had H81m-plus
pc 2 had H81m-DGS
pc 3 had m5A99FX pro R2.0

I use on all computer crimson 16.4.1

i use windows 7 64 bits

i mine on eth supernova pool :link here https://eth.suprnova.cc/

and my bat file is ethminer -G -F http://eth-mine.suprnova.cc:3000/ephx.1/a

i have build 3 worker ephx.1 ephx.2 and ephx.3 i have try all worker on each computer

i don't use any soft to check the temp because actuel the problem is not a shut down of the services is more about i mine for nothing because i can see my speed i can see my hashrate but only on console not in pool so my coin never come to my account (logical )

Give me five minutes .

take one of the bad pc's

use this as a bat file

ethminer -G -F http://us-east1.nanopool.org:8888/0x3ef297e47404a771139472b93621f82c8a832857/test

It should show here in a few minutes

http://nanopool.org/account/0x3ef297e47404a771139472b93621f82c8a832857

1   hd7970   few minutes ago   61.6 Mh/s   32.0 Mh/s   33.6 Mh/s
2   hd7970a   8 minutes ago   26.4 Mh/s   24.2 Mh/s   20.0 Mh/s
3   hd7750 this one is turned off

4 test it will be mining for my account Not looking to take money

if it shows write a new bat file

ethminer -G -F http://us-east1.nanopool.org:8888/ use your number not mine ~~0x3ef297e47404a771139472b93621f82c8a832857~~ /test/ use your email

pick one of the pc's that was not working right.

ep1989

member

Activity: 78

Merit: 10

pc 1= miners okey
pc 2= no miners
pc3 = no miners

pc 1 had H81m-plus
pc 2 had H81m-DGS
pc 3 had m5A99FX pro R2.0

I use on all computer crimson 16.4.1

i use windows 7 64 bits

i mine on eth supernova pool :link here https://eth.suprnova.cc/

and my bat file is ethminer -G -F http://eth-mine.suprnova.cc:3000/ephx.1/a

i have build 3 worker ephx.1 ephx.2 and ephx.3 i have try all worker on each computer

i don't use any soft to check the temp because actuel the problem is not a shut down of the services is more about i mine for nothing because i can see my speed i can see my hashrate but only on console not in pool so my coin never come to my account (logical )

philipma1957

legendary

Activity: 4326

Merit: 8950

'The right to privacy matters'

Quote from: ep1989 on April 12, 2016, 08:05:09 PM

hello guys i would ask for some help because i have 3 computer mining actuel 2 with 1 R9 380X and one rig with 5 r9 380X all the card was buy the same day. on the first computer i get 19 Mh/s and my computer is perfectly sync to the pool (i get all my eth mined ) .On the 2nd computer with only one card mine at 13mh/s and i cannot show my worker as active on my worker setting . on my rig with 5 card the miner is too showed as not active and by the way i cannot get my coins . My question is simple why i have this problem with a runme.bat copy paste on all these 3 computer ?? ?
P.S English is not my main language i know i don't writte perfeclty try to be nice and don't blame me for my english .

You need to be in alt coin section.

Okay shut it off you are wasting money.

pc 1 = no miners

pc 2 = 1 miner all good

pc 3 = 5 miners wrong.

what is the pc 3 mother board?

do you have any important stuff on that pc?

what is the amd driver I use 15.12

http://www.guru3d.com/files-details/amd-radeon-software-crimson-15-12-driver-download.html

what pool do you use?

I use here is my pool

http://nanopool.org

also do you have msi afterburner loaded?

https://gaming.msi.com/features/afterburner this lets you look at every single gpu on the pc.

I think you have two things wrong on the 5 card pc

the wrong driver and

a bad bat file

I hope this gear is for mining only.

I had your problem and I did a full load of my windows 7
my moboboard drivers

amd 15.12

and msi afterburner

then I loaded my software and name the work different like this:

so one pc has the worker name:

hd7970

the other pc has worker name:

hd7970A

ep1989

member

Activity: 78

Merit: 10

hello guys i would ask for some help because i have 3 computer mining actuel 2 with 1 R9 380X and one rig with 5 r9 380X all the card was buy the same day. on the first computer i get 19 Mh/s and my computer is perfectly sync to the pool (i get all my eth mined ) .On the 2nd computer with only one card mine at 13mh/s and i cannot show my worker as active on my worker setting . on my rig with 5 card the miner is too showed as not active and by the way i cannot get my coins . My question is simple why i have this problem with a runme.bat copy paste on all these 3 computer ?? ?
P.S English is not my main language i know i don't writte perfeclty try to be nice and don't blame me for my english .

Topic: mining problem on eth - page 2. (Read 1143 times)