Topic: (MKT) Mktcoin - POS and Masternodes - page 34. (Read 47923 times)
How can I get the kernel bin for the algorithm x17
Have any of you get MLM coins showing in online wallet? I am mining at Bsod.bw, btw.
I Have 3 payouts from bsod and no coins at online wallet.
To see your balances in site account go to:
https://office.mktcoin.org/financial/extract
then click: update with external balance
If anyone needs a sponsor, here is my link:
https://office.mktcoin.org/register/ibadoi
Thank you, it works!
So did anyone manage to sell on some exchange by sending from that online wallet?
EASY GUIDE ON HOW TO MINE - HOW TO MAKE YOUR WALLET SHOW THE MINED COINS - HOW TO TRANSFER - HOW TO EXCHANGE THE (MLM) Mktcoin. With FAQ and SUPPORT. V1.1
Actually this coin, at the moment I am writing, is by far the most profitable coin. On my GTX 1070 Ti I am making about $11/12 per day/card
GENERIC INFO ABOUT THE COIN:
Name: Mktcoin (MLM)
Algo: X17
Best Miner: Ccminer Alexis HSR(see the FAQ section for more detailed info) - download link --> http://www70.zippyshare.com/v/6kW6z11T/file.html
OC settings: 72% PL / +130 Core / + 350 MEM (see the FAQ section for more detailed info about -i intensity settings)
Pools: http://bsod.pw/ or http://pool2.dataseeq.com (see the FAQ section for relevant differences)
Exchange: https://www.southxchange.com/Market/Book/MLM/BTC
HOW TO MINE:
To mine this coin you will need:
1) THE WALLET. To create the wallet, in Windows, you have to register on the offical website. You can follow this link ----> REGISTER TO GET THE WALLET - Use screen following screenshots that will guide you on how to register and create the wallet:
- Click on the THIS LINK and you will be redirected to the registration page ---> https://prnt.sc/ilvf4x
- You will receive an email to confirm your registration. Click on the confirmation link.
- Login to your account and you will find on the home page your wallet ID. This is a unique ID that you will use to receive all of your transactions. ---> https://prnt.sc/ilvh2j
2) THE MINER. The best miner for the X17 Algo is the ALEXIS HSR miner. You can download it here: http://www70.zippyshare.com/v/6kW6z11T/file.html
To start the miner you will have to edit your start.bat file (or create it in case you don't have it already), which must be in the same folder of the ccminer.exe file and use this command inside the start.bat file:
ccminer-alexis.exe -a x17 -o -u -i 22 (check the FAQ for the best intensity settigns based on your card)
Save and start.
Now you are mining the MLM coin!
FAQ
Q) Where can I check my balance on the pool website where I am mining?
A) You can check on the pool page (https://prnt.sc/ilvn68) clicking on WALLET and filling it with your WALLET ID
Q) What is the best pool to mine?
A) The best pool where to mine -in theory- should have an high hash rate and should be VERY honest. It's very easy nowdays to mine in pools that will, in some way, steal a part of your profits. What I would suggest you is to make a comparison by yourself (I did it but I prefer to not share my results). Mine with, for example, 2 cards on one pool and 2 cards on another pool. Same type of cards, same all. Same start and same end. Keep mining for not less than 48 hours. You will be impressed by the results!
Q) Why my wallet balance on the home page is ZERO even if I received transactions from the pool where I mined?
A) To view your balance on your wallet just go to the "FINANCIAL" section of your control panel and click on UPDATE WITH EXTERNAL BALANCE ( https://prnt.sc/iltpnh ) and your balance will show up in a few seconds.
Q) How can I transfer my money to an exchange?
A) to transfer your balance just follow the instructions of these screen captures: https://prnt.sc/ilu1f7 and https://prnt.sc/ilu20m - Click on FINANCIAL then on BALANCE TRANSFER. Then select in the "Transfer of" MY WALLET option and in the "Transfer To" WALLET (HASH) option. Fill with the recipient ID and with the amount, click on VERIFY. Done.
Q) What are the best OC settings?
A) This coin uses the X17 Algo which is VERY INTENSIVE on the CORE but NOT very intensive on the MEMORY. Usually the core is being loaded at 100% while the memory load is just about 25/27%. My advice is to overclock the CORE as much as possible but to not overclock the memory too much.
My actual OC settings for cards using Afterburber are: TDP 72% / CORE + 130 / MEMORY + 350
If you don't have problems about electricity bill then you can increase the TDP to 100 but this will increase your power consumption quite a lot. I found the best power consumption to hash rate ratio being at 72% TDP. Up to you.
Q) What is the best -i intensity settings for my card?
A) I did a lot of performance testing and I find out that every card model can sustain different intensity settings. Here are the max settings I tested. Going higher caused crashed on my rigs.
- GTX 1060 6GB -i 21.5
- GTX 1070 (this card is very critical) - to keep the gtx 1070 stable and not crashing I had to set the -i to 20 and the max core clock to +100 and the MEM to +300
- GTX 1070yi -i 21.5
- GTX 1080ti -i 21.5
. If you experience crashes then reduce the intensity by 0.1 stepsa nd reduce the CORE clock by 10Mhz steps.
Q) What should be the hash rate on the NVIDIA GPU?
A) With my settings and Alexis HSR you should get: GTX 1060 6GB = 6.9 MH/s - GTX 1070 = 11 MH/s - GTX 1070ti = 13 MH/s - GTX 1080ti = 18.5 MH/s
Like I said before if you want a performance boost just increase the TDP from 72% up to 100%. But after some extensive testing I have found that at 72% I have the best performance to power usage ratio.
If you have more questions you can contact me in private. I will be glad to help.
If you did like my guide I ask you to register your wallet using my link. REGISTER TO GET THE WALLET
Actually this coin, at the moment I am writing, is by far the most profitable coin. On my GTX 1070 Ti I am making about $11/12 per day/card
GENERIC INFO ABOUT THE COIN:
Name: Mktcoin (MLM)
Algo: X17
Best Miner: Ccminer Alexis HSR(see the FAQ section for more detailed info) - download link --> http://www70.zippyshare.com/v/6kW6z11T/file.html
OC settings: 72% PL / +130 Core / + 350 MEM (see the FAQ section for more detailed info about -i intensity settings)
Pools: http://bsod.pw/ or http://pool2.dataseeq.com (see the FAQ section for relevant differences)
Exchange: https://www.southxchange.com/Market/Book/MLM/BTC
HOW TO MINE:
To mine this coin you will need:
1) THE WALLET. To create the wallet, in Windows, you have to register on the offical website. You can follow this link ----> REGISTER TO GET THE WALLET - Use screen following screenshots that will guide you on how to register and create the wallet:
- Click on the THIS LINK and you will be redirected to the registration page ---> https://prnt.sc/ilvf4x
- You will receive an email to confirm your registration. Click on the confirmation link.
- Login to your account and you will find on the home page your wallet ID. This is a unique ID that you will use to receive all of your transactions. ---> https://prnt.sc/ilvh2j
2) THE MINER. The best miner for the X17 Algo is the ALEXIS HSR miner. You can download it here: http://www70.zippyshare.com/v/6kW6z11T/file.html
To start the miner you will have to edit your start.bat file (or create it in case you don't have it already), which must be in the same folder of the ccminer.exe file and use this command inside the start.bat file:
ccminer-alexis.exe -a x17 -o -u
Save and start.
Now you are mining the MLM coin!
FAQ
Q) Where can I check my balance on the pool website where I am mining?
A) You can check on the pool page (https://prnt.sc/ilvn68) clicking on WALLET and filling it with your WALLET ID
Q) What is the best pool to mine?
A) The best pool where to mine -in theory- should have an high hash rate and should be VERY honest. It's very easy nowdays to mine in pools that will, in some way, steal a part of your profits. What I would suggest you is to make a comparison by yourself (I did it but I prefer to not share my results). Mine with, for example, 2 cards on one pool and 2 cards on another pool. Same type of cards, same all. Same start and same end. Keep mining for not less than 48 hours. You will be impressed by the results!
Q) Why my wallet balance on the home page is ZERO even if I received transactions from the pool where I mined?
A) To view your balance on your wallet just go to the "FINANCIAL" section of your control panel and click on UPDATE WITH EXTERNAL BALANCE ( https://prnt.sc/iltpnh ) and your balance will show up in a few seconds.
Q) How can I transfer my money to an exchange?
A) to transfer your balance just follow the instructions of these screen captures: https://prnt.sc/ilu1f7 and https://prnt.sc/ilu20m - Click on FINANCIAL then on BALANCE TRANSFER. Then select in the "Transfer of" MY WALLET option and in the "Transfer To" WALLET (HASH) option. Fill with the recipient ID and with the amount, click on VERIFY. Done.
Q) What are the best OC settings?
A) This coin uses the X17 Algo which is VERY INTENSIVE on the CORE but NOT very intensive on the MEMORY. Usually the core is being loaded at 100% while the memory load is just about 25/27%. My advice is to overclock the CORE as much as possible but to not overclock the memory too much.
My actual OC settings for cards using Afterburber are: TDP 72% / CORE + 130 / MEMORY + 350
If you don't have problems about electricity bill then you can increase the TDP to 100 but this will increase your power consumption quite a lot. I found the best power consumption to hash rate ratio being at 72% TDP. Up to you.
Q) What is the best -i intensity settings for my card?
A) I did a lot of performance testing and I find out that every card model can sustain different intensity settings. Here are the max settings I tested. Going higher caused crashed on my rigs.
- GTX 1060 6GB -i 21.5
- GTX 1070 (this card is very critical) - to keep the gtx 1070 stable and not crashing I had to set the -i to 20 and the max core clock to +100 and the MEM to +300
- GTX 1070yi -i 21.5
- GTX 1080ti -i 21.5
. If you experience crashes then reduce the intensity by 0.1 stepsa nd reduce the CORE clock by 10Mhz steps.
Q) What should be the hash rate on the NVIDIA GPU?
A) With my settings and Alexis HSR you should get: GTX 1060 6GB = 6.9 MH/s - GTX 1070 = 11 MH/s - GTX 1070ti = 13 MH/s - GTX 1080ti = 18.5 MH/s
Like I said before if you want a performance boost just increase the TDP from 72% up to 100%. But after some extensive testing I have found that at 72% I have the best performance to power usage ratio.
If you have more questions you can contact me in private. I will be glad to help.
If you did like my guide I ask you to register your wallet using my link. REGISTER TO GET THE WALLET
How to Check on the pool if the blocks you mined are confirmed?sorry i am a noob:) im on bsod page / pools so where i must look? i have 1.9 mlm unconfirmed
on your wallet page on BSOD, bottom right section you will see the blocks for which you have been rewarded. On the Status column it will show Immature (# of needed confirmations)
Here's a short tutorial for new users who want to start mining:
1. Open on account, for this you need a sponsor, and you can get one with my link
https://office.mktcoin.org/register/ibadoi
2. Get your wallet address from here:
https://office.mktcoin.org/profile/my-wallet
3. Download a miner from here:
Nvidia:
http://howmining.info/how-mine-mktcoin-mlm/
AMD:
https://bitcointalksearch.org/topic/m.26533765
4. Choose a pool
5. Setup miner bat file and run it
6. Profit $$
You can tip me at this address if you wish:
mZRis91usniiF7Q2ooqsi3bEie7jRHGQoj
1. Open on account, for this you need a sponsor, and you can get one with my link
https://office.mktcoin.org/register/ibadoi
2. Get your wallet address from here:
https://office.mktcoin.org/profile/my-wallet
3. Download a miner from here:
Nvidia:
http://howmining.info/how-mine-mktcoin-mlm/
AMD:
https://bitcointalksearch.org/topic/m.26533765
4. Choose a pool
5. Setup miner bat file and run it
6. Profit $$
You can tip me at this address if you wish:
mZRis91usniiF7Q2ooqsi3bEie7jRHGQoj
How to Check on the pool if the blocks you mined are confirmed?sorry i am a noob:) im on bsod page / pools so where i must look? i have 1.9 mlm unconfirmed
Have any of you get MLM coins showing in online wallet? I am mining at Bsod.bw, btw.
I Have 3 payouts from bsod and no coins at online wallet.
To see your balances in site account go to:
https://office.mktcoin.org/financial/extract
then click: update with external balance
If anyone needs a sponsor, here is my link:
https://office.mktcoin.org/register/ibadoi
Thank you, it works!
I have started mining and my wallet is always 0, how can i see how much did i mined and what is my profit?
In order to get your balance this has to be confirmed. Check on the pool if the blocks you mined are confirmed.
After you see balanced paid, you should be able to see it in your wallet after you sync external amount from online wallet.
go to "financial" -> "financial extract"-> press "update with external balance". This should show you your finances.
Newcomers, in order to create your wallet online you must create an account at: https://office.mktcoin.org/register/faneatiku
"Sponsor" field is required you can use me "faneatiku".
MLM to the moon!
Tutorials for mine Mktcoin, create wallet, pools, OC settings...
http://howmining.info/how-mine-mktcoin-mlm/
http://howmining.info/how-mine-mktcoin-mlm/
I have started mining and my wallet is always 0, how can i see how much did i mined and what is my profit?
Have any of you get MLM coins showing in online wallet? I am mining at Bsod.bw, btw.
I Have 3 payouts from bsod and no coins at online wallet.
To see your balances in site account go to:
https://office.mktcoin.org/financial/extract
then click: update with external balance
If anyone needs a sponsor, here is my link:
https://office.mktcoin.org/register/ibadoi
Have any of you get MLM coins showing in online wallet? I am mining at Bsod.bw, btw.
I will soon post a full guide that will answer also your question. no worries you can keep mining all is ok.
Have any of you get MLM coins showing in online wallet? I am mining at Bsod.bw, btw.
I Have 3 payouts from bsod and no coins at online wallet.
Have any of you get MLM coins showing in online wallet? I am mining at Bsod.bw, btw.
All new miners create account on https://office.mktcoin.org/register/faneatiku in order to get a wallet.
Accessing https://office.mktcoin.org will require a "sponsor", just type faneatiku.
Get in
Accessing https://office.mktcoin.org will require a "sponsor", just type faneatiku.
Get in
Anyone mining with AMD card? I only found the ancient sgminer for x17 but it crashed all the time.
Thanks in advance for the help.
For those who need a sponsor link.
You can use my sponsor link to join.
https://office.mktcoin.org/register/icotrak
Thanks in advance for the help.
For those who need a sponsor link.
You can use my sponsor link to join.
https://office.mktcoin.org/register/icotrak
~4.3MHs on RX570s
~4.6MHs on RX580s
Do you have a roadmap with dates?
Actually this coin at the moment is by far the most profitable coin. On my GTX 1070 Ti I am making about 0,009-0,0011BTC per day/card
Info about the coin:
Algo: X17
Possible questions/problems (zero balance in your online wallet):
you will have to register on the official website to get the wallet. You will be assigned with a unique wallet ID.
Once you will start mining your balance will probably remain at zero in your control panel.
Just go in the "FINANCIAL" section of your control panel and click on UPDATE WITH EXTERNAL BALANCE ( https://prnt.sc/iltpnh ) and your balance will show up.
Instead to transfer your balance just follow these screen captures: https://prnt.sc/ilu1f7 and https://prnt.sc/ilu20m
To register it's mandatory to have a referral code.
Register MKTCOIN Web Wallet https://office.mktcoin.org/register/ruplikminer
Pool For Mine:
http://bsod.pw/
Miner:
Alexis 1.0.0 - for get link register wallet and write PM. Wink
Bat File:
GPU_MAX_ALLOC_PERCENT 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_HEAP_SIZE 100
ccminer.exe -a x17 -o stratum+tcp://pool.bsod.pw:1984 -u WALLET.RIGNAME -p x
pause
Exchange:
https://www.southxchange.com/Market/Book/MLM/BTC
Info about the coin:
Algo: X17
Possible questions/problems (zero balance in your online wallet):
you will have to register on the official website to get the wallet. You will be assigned with a unique wallet ID.
Once you will start mining your balance will probably remain at zero in your control panel.
Just go in the "FINANCIAL" section of your control panel and click on UPDATE WITH EXTERNAL BALANCE ( https://prnt.sc/iltpnh ) and your balance will show up.
Instead to transfer your balance just follow these screen captures: https://prnt.sc/ilu1f7 and https://prnt.sc/ilu20m
To register it's mandatory to have a referral code.
Register MKTCOIN Web Wallet https://office.mktcoin.org/register/ruplikminer
Pool For Mine:
http://bsod.pw/
Miner:
Alexis 1.0.0 - for get link register wallet and write PM. Wink
Bat File:
GPU_MAX_ALLOC_PERCENT 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_HEAP_SIZE 100
ccminer.exe -a x17 -o stratum+tcp://pool.bsod.pw:1984 -u WALLET.RIGNAME -p x
pause
Exchange:
https://www.southxchange.com/Market/Book/MLM/BTC
Why you copied most of my post?
Anyone mining with AMD card? I only found the ancient sgminer for x17 but it crashed all the time.
Thanks in advance for the help.
For those who need a sponsor link.
You can use my sponsor link to join.
https://office.mktcoin.org/register/icotrak
Thanks in advance for the help.
For those who need a sponsor link.
You can use my sponsor link to join.
https://office.mktcoin.org/register/icotrak
Jump to: