How is the noise of these things?
I have 4 s5's with s3 fans on both sides, but it is still to loud for my girlfriend.
Maby I can make them watercooled, I want to run them at 350 or 375.
Topic: Modify S5 Antminer to watercooling - page 6. (Read 15819 times)
Is there screw holes for both the S5 and the S3 on each side? The C1 has screw holes so that one board is facing upside down from the other, while the new kit shows the S5 boards both upright?
One side has a total of 20 screw holes. Exactly the same spot where the S5 20x screw holes is.
C1 uses S3+ boards, only the data connector is soldered to the other side of the boards. The same 20x screw holes.
Are these the same watercooling blocks that fit the S3/C1's with just a different screw hole location on one side of the watercooling block?
ANTS3 Water block http://shop.syscooling.com/goods.php?id=47
Today I received 4 pc. Screw holes location on both sides and it is compatible with the S5 hash boards.
Is there screw holes for both the S5 and the S3 on each side? The C1 has screw holes so that one board is facing upside down from the other, while the new kit shows the S5 boards both upright?
Are these the same watercooling blocks that fit the S3/C1's with just a different screw hole location on one side of the watercooling block?
ANTS3 Water block http://shop.syscooling.com/goods.php?id=47
Today I received 4 pc. Screw holes location on both sides and it is compatible with the S5 hash boards.
This is an amazing mod!
If anyone got one of these up & running can u please let me know??
If anyone got one of these up & running can u please let me know??
Looks like this will need at least two 1300 G2 power supply, using all the PCIe connectors (4 single + 2 double connectors = 8 ) that come with it, on each side. With 2x 1600w power supply you may be able to add an additional S5 to the setup (=1200w x2 + 600w = 3000w), but will need to purchase a couple of extra PCIe single connector cables per power supply if you want to add the additional S5, by the way the T2 Titanium has been released). Hopefully it'll be enough to power the 8 additional fans and the pump also. Would have preferred the controller cards at the top with just 1 per side (=2) like the current S5, if it needed 4 then one facing each direction (front and back) may have been better if the lower board was slightly shorter and only half the length of the S5. I'm estimating that the kit and additional S2 big radiator kit will be about $300 plus shipping (4 watercooling blocks = @$100, cooling kit $120, enclosure, cables and 2 fans =@$60).
Are these the same watercooling blocks that fit the S3/C1's with just a different screw hole location on one side of the watercooling block?
Are these the same watercooling blocks that fit the S3/C1's with just a different screw hole location on one side of the watercooling block?
I think so, the divider looks like you can attach a controller card to each side. I just don't get why it looks like there are 4 Ethernet openings between the fans. I'm also curious what type of cooling kit will be offered? I don't think the C1 cooling kit will be enough to cool it. Or will it be the big kit and that will be enough to cool 2 of these?
EDIT: I see now, 4 controller cards (do the other ports not work on the S5 controller card then, shouldn't you only need 2 of these with 4 S5's?), 2 on each side of the divider, equal to 8 S5's or that was the original design, so yes it's probably one of the big radiator kits for each of these since it's 2400 watts.
EDIT: I see now, 4 controller cards (do the other ports not work on the S5 controller card then, shouldn't you only need 2 of these with 4 S5's?), 2 on each side of the divider, equal to 8 S5's or that was the original design, so yes it's probably one of the big radiator kits for each of these since it's 2400 watts.
Today I received SC-BC2 antiminner cooling kit http://shop.syscooling.com/goods.php?id=46
He has a huge and quiet.
One controller card works for me with 2 Antminer S5 ( together 4 blades )
I think so, the divider looks like you can attach a controller card to each side. I just don't get why it looks like there are 4 Ethernet openings between the fans (looks like they've upgraded to 140mm fans). I'm also curious what type of cooling kit will be offered? I don't think the C1 cooling kit will be enough to cool it. Or will it be the big kit and that will be enough to cool 2 of these?
EDIT: I see now, 4 controller cards (do the other ports not work on the S5 controller card then, shouldn't you only need 2 of these with 4 S5's?), 2 on each side of the divider, equal to 4 S5's (8 blades/boards) or that was the original design, so yes it's probably one of the big radiator kits for each of these since it's 2400 watts.
EDIT: I see now, 4 controller cards (do the other ports not work on the S5 controller card then, shouldn't you only need 2 of these with 4 S5's?), 2 on each side of the divider, equal to 4 S5's (8 blades/boards) or that was the original design, so yes it's probably one of the big radiator kits for each of these since it's 2400 watts.
Watecooling Components:Modify S5 Antminer to Watercooling Miner
Components include cover,waterblock and fans, you could order 8 hash boards from Bitmain, and assemble a watercooling S5 miner by yourself.
Components include cover,waterblock and fans, you could order 8 hash boards from Bitmain, and assemble a watercooling S5 miner by yourself.
1 controller receives only signal from 4 hash boards. Do I need for this projekt two controllers ?
Thank you for the cool project and experiment!
If you could, please mention that any hardware modification will void Bitmain Warranty Qualification, if you could....
But, what about the 4 data cables and 1x 4 pin power cables for controller board? They need to do a longer or replace it.
If you could, please mention that any hardware modification will void Bitmain Warranty Qualification, if you could....
But, what about the 4 data cables and 1x 4 pin power cables for controller board? They need to do a longer or replace it.
What other components are you providing to cool the roughly ~2KW? Same as C1 kit?
Watecooling Components:Modify S5 Antminer to Watercooling Miner
Components include cover,waterblock and fans,you could order 8 hash boards from Bitmain,and assemble a watercooling S5 miner by yourself.
Jump to: