[MOJO] MOJOv3 has been taken over by new devs - page 20.

alexxynn

sr. member

Activity: 381

Merit: 250

getinfo:
"version" : "v2.4.5.0-61402",
"protocolversion" : 90002,
"walletversion" : 60000,

mojocoin.conf:
addnode=128.199.34.210
addnode=130.180.106.26
addnode=194.106.98.24
addnode=222.5.183.201
addnode=46.188.4.74
addnode=73.130.81.250
addnode=81.154.137.240
addnode=85.214.68.75
addnode=91.18.100.227

debug.log:
2016-11-09 09:38:49 UPnP Port Mapping successful.
2016-11-09 09:38:50 partner 45.63.43.114:22255 using obsolete version 90000; disconnecting
2016-11-09 09:38:50 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 09:38:51 socket recv error 10054
2016-11-09 09:39:03 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 09:39:03 ProcessMessage(version, 101 bytes) FAILED

"addnode" doesn't work
it tries to be connected only to 45.32.234.45:22255 and 45.63.43.114:22255

45.32.234.45:22255 and 45.63.43.114:22255 - PERMANENT SEED NODES (hardcoded) Huh

?

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: alexxynn on November 09, 2016, 01:29:27 AM

Quote from: Limx Dev on November 08, 2016, 02:23:17 AM

Quote from: Haunebu81 on November 07, 2016, 06:11:44 PM

Okay so even with the new wallet, transactions are taking forever to confirm. It's been over an hour with no confirmations yet. Is this normal?

Yes, that is possible but not our objektive. Can you send me your Debug.log? Can you deinstall your local
Installation with my deinstaller? After than install fresh and make a test.

2016-11-09 06:27:34 UPnP Port Mapping successful.
2016-11-09 06:27:34 socket recv error 10054
2016-11-09 06:27:41 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:27:41 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:27:42 partner 45.63.43.114:22255 using obsolete version 90000; disconnecting
2016-11-09 06:27:42 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:27:48 socket recv error 10054
2016-11-09 06:28:01 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:01 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:02 partner 45.63.43.114:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:02 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:10 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:10 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:10 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:10 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:11 socket recv error 10054
2016-11-09 06:28:34 socket recv error 10054

"addnode" doesn't work
it tries to be connected only to 45.32.234.45:22255 and 45.63.43.114:22255

The version 90000 is to old for the current version. The minimum is 90001 now. The old version makes many trouble and set the local installation in a fallback modus.

https://chainz.cryptoid.info/mojo/#!network

Best Regards Christian

alexxynn

sr. member

Activity: 381

Merit: 250

Quote from: Limx Dev on November 08, 2016, 02:23:17 AM

Quote from: Haunebu81 on November 07, 2016, 06:11:44 PM

Okay so even with the new wallet, transactions are taking forever to confirm. It's been over an hour with no confirmations yet. Is this normal?

Yes, that is possible but not our objektive. Can you send me your Debug.log? Can you deinstall your local
Installation with my deinstaller? After than install fresh and make a test.

2016-11-09 06:27:34 UPnP Port Mapping successful.
2016-11-09 06:27:34 socket recv error 10054
2016-11-09 06:27:41 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:27:41 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:27:42 partner 45.63.43.114:22255 using obsolete version 90000; disconnecting
2016-11-09 06:27:42 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:27:48 socket recv error 10054
2016-11-09 06:28:01 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:01 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:02 partner 45.63.43.114:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:02 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:10 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:10 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:10 partner 45.32.234.45:22255 using obsolete version 90000; disconnecting
2016-11-09 06:28:10 ProcessMessage(version, 101 bytes) FAILED
2016-11-09 06:28:11 socket recv error 10054
2016-11-09 06:28:34 socket recv error 10054

"addnode" doesn't work
it tries to be connected only to 45.32.234.45:22255 and 45.63.43.114:22255

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: Haunebu81 on November 07, 2016, 06:11:44 PM

Okay so even with the new wallet, transactions are taking forever to confirm. It's been over an hour with no confirmations yet. Is this normal?

Yes, that is possible but not our objektive. Can you send me your Debug.log? Can you deinstall your local
Installation with my deinstaller? After than install fresh and make a test.

Haunebu81

hero member

Activity: 525

Merit: 500

Okay so even with the new wallet, transactions are taking forever to confirm. It's been over an hour with no confirmations yet. Is this normal?

Haunebu81

hero member

Activity: 525

Merit: 500

Seems to be working!

Haunebu81

hero member

Activity: 525

Merit: 500

Quote from: Limx Dev on November 06, 2016, 05:45:19 PM

Quote from: Haunebu81 on November 06, 2016, 05:29:00 PM

Okay I installed it. It's now stuck on the dashboard screen (Not Responding) CPU usage is fluctuating between 13% to 25% (1 to 2 cores). It's been about 10 minutes. I'll let it do it's thing until I get back home.

Edit: Finally became responsive. Will the unconfirmed transactions now resolve themselves, or are there any other steps I need to do?

Try the flag -zapwallettxes=1 by wallet start. This remove wrong txs from your wallet.dat.

Okay, that cleared all my previous unconfirmed transactions. Just sent a new transaction which is still unconfirmed. I'll report back in about 30 min.

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: Haunebu81 on November 06, 2016, 05:29:00 PM

Okay I installed it. It's now stuck on the dashboard screen (Not Responding) CPU usage is fluctuating between 13% to 25% (1 to 2 cores). It's been about 10 minutes. I'll let it do it's thing until I get back home.

Edit: Finally became responsive. Will the unconfirmed transactions now resolve themselves, or are there any other steps I need to do?

Try the flag -zapwallettxes=1 by wallet start. This remove wrong txs from your wallet.dat.

Haunebu81

hero member

Activity: 525

Merit: 500

Okay I installed it. It's now stuck on the dashboard screen (Not Responding) CPU usage is fluctuating between 13% to 25% (1 to 2 cores). It's been about 10 minutes. I'll let it do it's thing until I get back home.

Edit: Finally became responsive. Will the unconfirmed transactions now resolve themselves, or are there any other steps I need to do?

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: Haunebu81 on November 06, 2016, 05:10:56 PM

Quote from: Limx Dev on November 06, 2016, 04:28:48 PM

I have write a installer for windows os. This installer replace your complete local installation (wallet.dat is safe). Try it..if you have a problem then use the deinstaller and install new. The installer can overwrite your local mojocoin.conf (recommend). Installer is with chain!

Best Regards Christian

Download
https://github.com/MojocoinV2/mojocoin/releases/tag/v2.4.5.0.0

Thanks. I'll try that later when I have time. Do my masternodes need to be updated as well, or just the control wallet?

The update is mandatory. The installer is only for end user or safe your mojocoin.conf before.

Haunebu81

hero member

Activity: 525

Merit: 500

Quote from: Limx Dev on November 06, 2016, 04:28:48 PM

I have write a installer for windows os. This installer replace your complete local installation (wallet.dat is safe). Try it..if you have a problem then use the deinstaller and install new. The installer can overwrite your local mojocoin.conf (recommend). Installer is with chain!

Best Regards Christian

Download
https://github.com/MojocoinV2/mojocoin/releases/tag/v2.4.5.0.0

Thanks. I'll try that later when I have time. Do my masternodes need to be updated as well, or just the control wallet?

Limx Dev

copper member

Activity: 2352

Merit: 1348

I have write a installer for windows os. This installer replace your complete local installation (wallet.dat is safe). Try it..if you have a problem then use the deinstaller and install new. The installer can overwrite your local mojocoin.conf (recommend). Installer is with chain!

Best Regards Christian

Download
https://github.com/MojocoinV2/mojocoin/releases/tag/v2.4.5.0.0

Limx Dev

copper member

Activity: 2352

Merit: 1348

Quote from: Haunebu81 on November 06, 2016, 09:10:04 AM

Quote from: EBK1000 on November 06, 2016, 01:38:53 AM

Updates in progress, v2.4.5.0 is on GitHub so new wallets and updated OP soon...

Does it fix the transaction bug, so I can finally send coins?

You can send me your debug.log. I try to help.

Note: The new Windows build is online.

Haunebu81

hero member

Activity: 525

Merit: 500

Quote from: EBK1000 on November 06, 2016, 01:38:53 AM

Updates in progress, v2.4.5.0 is on GitHub so new wallets and updated OP soon...

Does it fix the transaction bug, so I can finally send coins?

EBK1000

legendary

Activity: 1148

Merit: 1000

A Wound in Eternity

Updates in progress, v2.4.5.0 is on GitHub so new wallets and updated OP soon...

megacryptonews

newbie

Activity: 14

Merit: 0

https://i.imgur.com/QwSqFRt.png

Trade [MOJO] Mojocoin with MegaCrypton.com Secured Crypto trade Platform.

BTC/MOJO: https://live.megacrypton.com/market/66
LTC/MOJO: https://live.megacrypton.com/market/67
USD/MOJO: https://live.megacrypton.com/market/
DOGE/MOJO: https://live.megacrypton.com/market/

Megacrypton MOJO WebWallet: https://live.megacrypton.com/login

SIGNUP FOR MEGACRYPTON: https://live.megacrypton.com/user/register

Twitter: https://twitter.com/megacrypton
Facebook: https://www.facebook.com/Megacrypton-1048724951862655

Disclaimer:MegaCrypton is a P2P exchange Platform, Trade price depends on user,
we do not control or set price Trade More than 200+ Coins pair Host ICO/IPO/Crowdsale*Provide White Label
Partnership Developments of Altcoins,Blockexplorer,Node, Faucet

cryptodv

hero member

Activity: 1092

Merit: 507

btcstakes.com

My coins have been held up at Livecoin forever! Any significant news for this project Huh

Haunebu81

hero member

Activity: 525

Merit: 500

Is there some sort of trick people are using to send coins? None of my transaction attempts seem to be getting confirmed. I think I remembered a workaround for it.

bitbeanpool

member

Activity: 74

Merit: 100

Quote from: EBK1000 on October 28, 2016, 02:35:18 AM

Quote from: bitbeanpool on October 28, 2016, 02:23:44 AM

Updated my wallet to v2.4 and lost 147000 coins. Was there a swap as well? What is the deal?

It would be useful with some further information on this. What address(s) did you have the coins in? In the first instance, try to do a -dumpprivkey for the addresses with the funds and then see, and then import it back and rescan. See if that works, if not let me know.

Have you checked the block explorer for the addresses? Your funds wouldn't be lost...

Tried the following, coins still not loading into wallet. Coins still exist on block chain.

1) Rescan
2) Rebuild blockchain
3) Rebuild wallet and import priv keys

EBK1000

legendary

Activity: 1148

Merit: 1000

A Wound in Eternity

Quote from: bumbacoin on November 03, 2016, 10:06:02 AM

Quote from: PPan on November 01, 2016, 05:13:13 AM

Quote from: bumbacoin on October 31, 2016, 11:00:26 PM

i just noticed the OP links the old version of the mojocoind resulting in the glibcxx error.

also, if anyone is interested
i had call to download the mojocoind to a command line vps, to do so i used

wget --no-check-certificate 'https://drive.google.com/uc?export=download&id=0B5j8d4FSc7draEgwc0pYa2dXTkk' -O mojocoind

Nothing for bad, bumbacoin...
You should only install software from official sources

i built them both,
my first effort at building it resulted in an error :p this non-working version was/is listed on the OP,
i updated that version a few pages back, but the OP has not been updated to link to that version i mention.

i agree, that a link in thread is not the best place to get seomthing from, so i hope EBK1000 updates the OP

hehe this post should perhaps make more sense coming from this account Wink

Sorry, I will update the OP shortly

Topic: [MOJO] MOJOv3 has been taken over by new devs - page 20. (Read 167322 times)