The MojoV3 thread is not writable, therefore the question here:
Is there a mojov3 github to follow the v3 development?
Is there a mojov3 github to follow the v3 development?
or some status update about the v3
Topic: [MOJO] MOJOv3 has been taken over by new devs - page 21. (Read 167311 times)
or some status update about the v3
i just noticed the OP links the old version of the mojocoind resulting in the glibcxx error.
also, if anyone is interested
i had call to download the mojocoind to a command line vps, to do so i used
wget --no-check-certificate 'https://drive.google.com/uc?export=download&id=0B5j8d4FSc7draEgwc0pYa2dXTkk' -O mojocoind
Nothing for bad, bumbacoin...
You should only install software from official sources
i built them both,
my first effort at building it resulted in an error :p this non-working version was/is listed on the OP,
i updated that version a few pages back, but the OP has not been updated to link to that version i mention.
i agree, that a link in thread is not the best place to get seomthing from, so i hope EBK1000 updates the OP
hehe this post should perhaps make more sense coming from this account
The MojoV3 thread is not writable, therefore the question here:
Is there a mojov3 github to follow the v3 development?
Is there a mojov3 github to follow the v3 development?
i just noticed the OP links the old version of the mojocoind resulting in the glibcxx error.
also, if anyone is interested
i had call to download the mojocoind to a command line vps, to do so i used
wget --no-check-certificate 'https://drive.google.com/uc?export=download&id=0B5j8d4FSc7draEgwc0pYa2dXTkk' -O mojocoind
Nothing for bad, bumbacoin...
You should only install software from official sources
Are there additional dependencies that need to be installed when using mojocoind 2.4 on Ubuntu 14.04? I'm not in front of my rig right now, but I was getting a bunch or errors (I posted it in slack).
If so, what's the apt-get link?
If so, what's the apt-get link?
I'm getting the following error:
/usr/lib/x86_64-linux-gnu/libstdc++.so.6: version `GLIBCXX_3.4.21' not found
Can anyone help? I'm on Ubuntu 14.04.
are you using the version i compiled ??
i've noticed i've compiled it on ubuntu 16.
possibly 14.04 doesnt have that version or is looking in the wrong spot.
i'll have a look and see what i can do. possibly recompile for ubuntu 14
try this version.
compiled on ubuntu 14.04. https://drive.google.com/file/d/0B5j8d4FSc7draEgwc0pYa2dXTkk/view?usp=sharing
the problem seemed to be that that system lib was not backward compatible.
haha hope no-one comes along with ubuntu 12 ..
i just noticed the OP links the old version of the mojocoind resulting in the glibcxx error.
also, if anyone is interested
i had call to download the mojocoind to a command line vps, to do so i used
wget --no-check-certificate 'https://drive.google.com/uc?export=download&id=0B5j8d4FSc7draEgwc0pYa2dXTkk' -O mojocoind
MOJOv3 ≈≈≈ Zcash ？
Updated my wallet to v2.4 and lost 147000 coins. Was there a swap as well? What is the deal?
It would be useful with some further information on this. What address(s) did you have the coins in? In the first instance, try to do a -dumpprivkey for the addresses with the funds and then see, and then import it back and rescan. See if that works, if not let me know.
Have you checked the block explorer for the addresses? Your funds wouldn't be lost...
Updated my wallet to v2.4 and lost 147000 coins. Was there a swap as well? What is the deal?
version 2.4.0
connection 0/0 (very rarely 1)
masternodes 0/0
Are there some nodes to add?
connection 0/0 (very rarely 1)
masternodes 0/0
Are there some nodes to add?
mojonode01.mojocoin.org
mojonode02.mojocoin.org
mojonode03.mojocoin.org
version 2.4.0
connection 0/0 (very rarely 1)
masternodes 0/0
Are there some nodes to add?
connection 0/0 (very rarely 1)
masternodes 0/0
Are there some nodes to add?
I have 25000 MojocoinV1 in my wallet. The wallet does not sync. If I install the 2.4.o. qt the sum in transaction list is market with conflicted.
How can I recover my coins ?
P.S. Coins were initially on a paper wallet and I imported the paper wallet key into my V1 qt.
Thank you for your help.
Mike
How can I recover my coins ?
P.S. Coins were initially on a paper wallet and I imported the paper wallet key into my V1 qt.
Thank you for your help.
Mike
V1 to V2 swap can now only be done by hand directly by ebk1000. Contact him he can help.
regards
I have 25000 MojocoinV1 in my wallet. The wallet does not sync. If I install the 2.4.o. qt the sum in transaction list is market with conflicted.
How can I recover my coins ?
P.S. Coins were initially on a paper wallet and I imported the paper wallet key into my V1 qt.
Thank you for your help.
Mike
How can I recover my coins ?
P.S. Coins were initially on a paper wallet and I imported the paper wallet key into my V1 qt.
Thank you for your help.
Mike
I'm off for a walk in Wales for a few days and won't be online until Sunday night. If there are any issues Limxdev might be around. Otherwise, just let it run for a while and we will see.
I moved 250k Mojo from Livecoin to my wallet between 14th and 21st of October. Some transactions were instant, some got stuck for a day or 2, but they all got there eventually. I had to lock/unlock my wallet quite a few times and send them in small amounts, 5k-20k batches.
i doing researching about MOJO........
Hi,
I stopped my 3 Masternodes and will put the coins to stake. It's much easier to have a working staking wallet with the possibility to move funds than to have them sitting in the wallet which will grow insane from the amount of small masternode transactions.
regards
I stopped my 3 Masternodes and will put the coins to stake. It's much easier to have a working staking wallet with the possibility to move funds than to have them sitting in the wallet which will grow insane from the amount of small masternode transactions.
regards
The roadmap at the moment is a transition to MOJOv3 as detailed here:
https://bitcointalksearch.org/topic/deleted-1629189
We are working out the finer details of this and the project of a transition to MOJOv3 is out to tender for additional devs to complete the programming work. We will then be on a Bitcoin core 0.11.0 base w/ a PoSv3 modification w/ anonymous transactions. We have learnt from the experience of MOJOv2 and have done a lot of research around privacy.
So, roadmap is
(1) Complete MOJOv3
(2) Integrate MOJOv3 in Open Bazaar
assess again.
Edit: timeframe? MOJOv3 December / January
Thank you for the update sir. So, you are now working in Mojov3 transition? So, another possible swapping of coin again this January 2017 and I hope this time all issues will be iron out. I am very supportive of this coin from Mojov1 until I deposited all my coin in livecoin for mojov2 and until then,nothing happen
Hope this time...Good Luck Dev Team...
Hi.
I have tried to send mojos with the workaround of unlocking the wallet, with higher fee, with staking, etc... with no success...
Anybody has been able to send mojos recently?
I'm using mojocoin2.4.0.0 on linux....
I have tried to send mojos with the workaround of unlocking the wallet, with higher fee, with staking, etc... with no success...
Anybody has been able to send mojos recently?
I'm using mojocoin2.4.0.0 on linux....
No I tried to move one single MN address to another wallet again without success. This is real pain in the ass ..
Currently I'm totally unable to move any funds.
@EBK1000 we urgent need a fix here
regards
Finally, I don't know why, but all my pending tx has been confirmed and included in the blockchain. Some transactions were locked since 10/10 :-(
The problem is that I don't know why the transactions finally has been completed. The wallet has been running for about 5 hours this time, but other times I keep the wallet opened all day long without success....
Maybe the solution is to complain on BCT :-)
My wallets runs all correct. No problem to send some coins from Masternode. Is your chain right? The Diff retarget need some days for correct works. It is possible that some wallets are in fall back modus. (That need onyl Time) The hardfork is fresh.
I think that my chain is right. Maybe the problem is when is a masternode controller wallet.?
Hi.
I have tried to send mojos with the workaround of unlocking the wallet, with higher fee, with staking, etc... with no success...
Anybody has been able to send mojos recently?
I'm using mojocoin2.4.0.0 on linux....
I have tried to send mojos with the workaround of unlocking the wallet, with higher fee, with staking, etc... with no success...
Anybody has been able to send mojos recently?
I'm using mojocoin2.4.0.0 on linux....
No I tried to move one single MN address to another wallet again without success. This is real pain in the ass ..
Currently I'm totally unable to move any funds.
@EBK1000 we urgent need a fix here
regards
Finally, I don't know why, but all my pending tx has been confirmed and included in the blockchain. Some transactions were locked since 10/10 :-(
The problem is that I don't know why the transactions finally has been completed. The wallet has been running for about 5 hours this time, but other times I keep the wallet opened all day long without success....
Maybe the solution is to complain on BCT :-)
My wallets runs all correct. No problem to send some coins from Masternode. Is your chain right? The Diff retarget need some days for correct works. It is possible that some wallets are in fall back modus. (That need onyl Time) The hardfork is fresh.
Yes, I am aware and looking into it
Jump to: