@DEV maybe it's time to hire a skilled developer to fix the code ... this is far more important than compiling a windows wallet (if you have linux / mac already)
regards
btw another block appeared - what is this ?
Topic: [MOJO] MOJOv3 has been taken over by new devs - page 69. (Read 167315 times)
Another Day - same Problem
Chain stuck now for 1.5 days - imho this coin is DEAD (NOC CHAIN - NO COIN)
@DEV why don't you answer the main question - why is the chain stuck ? I've two full nodes running. I can't start a masternode because I can't produce a 100.000 transaction without running chain.
If you can get the chain running - consider to buy back the coins and pay back the ICO BTC.
regards
Chain stuck now for 1.5 days - imho this coin is DEAD (NOC CHAIN - NO COIN)
@DEV why don't you answer the main question - why is the chain stuck ? I've two full nodes running. I can't start a masternode because I can't produce a 100.000 transaction without running chain.
If you can get the chain running - consider to buy back the coins and pay back the ICO BTC.
regards
this
I think that we must give some time to the dev @EBK1000 to solve the technical problems. Only it has a very big problem with PR.
and how much time do you think is enough? it took months to "fix" this coin. Everyone had to go through a swap and what do we have now? a stuck chain & buggy wallet
this coin is only 100 satoshi away from being death as fuck 
I think that we must give some time to the dev @EBK1000 to solve the technical problems. Only it has a very big problem with PR.
dumping the shit out of this coin
it´s the biggest candidate for the most biggest ico scam 2016 after dao
it´s the biggest candidate for the most biggest ico scam 2016 after dao
Another Day - same Problem
Chain stuck now for 1.5 days - imho this coin is DEAD (NOC CHAIN - NO COIN)
@DEV why don't you answer the main question - why is the chain stuck ? I've two full nodes running. I can't start a masternode because I can't produce a 100.000 transaction without running chain.
If you can get the chain running - consider to buy back the coins and pay back the ICO BTC.
regards
Chain stuck now for 1.5 days - imho this coin is DEAD (NOC CHAIN - NO COIN)
@DEV why don't you answer the main question - why is the chain stuck ? I've two full nodes running. I can't start a masternode because I can't produce a 100.000 transaction without running chain.
If you can get the chain running - consider to buy back the coins and pay back the ICO BTC.
regards
thanks im trying you know ho it can be on yobit damn i have had these coins since day 1 i hope i can get them back i have held like i planned to and now this. my luck has been so bad
yes live coin wont help ypbit wont help i do no want to loose my 13,999 Mojo i mailed dev with no response
only yobit can help in giving you the private key - no other solution here ...
regards
yes live coin wont help ypbit wont help i do no want to loose my 13,999 Mojo i mailed dev with no response
Stuck now for more than 21 hours
@DEV where are you ...
@DEV where are you ...
Address MGfmtNPSk9mFABjtuQF8xizJ2DTgxrRLNy Send Mojocoin
Balance 13,999.989984 MOJO
Rich List Rank 19 at block 12355 with 13,999.989984 MOJO
Guesstimated Wallet none
Received 13,999.989984 MOJO in 1 transactions
Sent 0.0 MOJO in 0 transactions
and it says not yet redeemed says at block 12355
Hash 828a86c78f457bdf68e74459efe720c91e905f0a8a6c7befe4aabb5d328df159
Block Height 5323 (7033 confirmations)
Block Date/Time 2016-06-22 00:22:25
Total Output 78,636.15893029 MOJO
Fees 0.0001 MOJO
Inputs / Outputs
Raw Transaction
Inputs
Index Previous output Address Amount
0 6927b689741188ba...:0 MWMymJas9PKLP98Wnfkde1Mea4pppbU2ii 78,636.15903029 MOJO
Outputs
Index Redeemed in Address Amount
0 Not yet redeemed MGfmtNPSk9mFABjtuQF8xizJ2DTgxrRLNy 13,999.989984 MOJO
1 b0ebd9c1a57de126... MHWi7XTnvAABCwFf57aw363mGCbhF1YQpS 64,636.16894629 MOJO
again - you need the private key which belongs to MGfmtNPSk9mFABjtuQF8xizJ2DTgxrRLNy
at the moment the chain stuck again at block 12355 since 16 hours :-(
Regards
For same reason the block 12356 is not accepted by the network.
Regards
Code:
2016-06-28 07:27:51 out 50002.51000974
2016-06-28 07:27:51 ERROR: ProcessBlock() : already have block 12356 eb973b1a26ddef80613ff63ccbad53318e058804ddc279f9c67f3c5cdce144f2
2016-06-28 07:27:51 ERROR: CheckStake() : ProcessBlock, block not accepted
2016-06-28 07:27:51 CheckStakeKernelHash() : using modifier 0xb4fc598f9e69cb73 at height=12355 timestamp=2016-06-27 21:44:32 UTC for block from timestamp=2016-06-26 17:18:40 UTC
2016-06-28 07:27:51 CheckStakeKernelHash() : check modifier=0xb4fc598f9e69cb73 nTimeBlockFrom=1466961520 nTimeTxPrev=1466961520 nPrevout=1 nTimeTx=1467098864 hashProof=3adb4adaa620276b802c7d4e8d24b6f7f854066780c4f314c6d35036c8e9ab30
2016-06-28 07:27:51 Masternode payment to 3QJmnh
2016-06-28 07:27:51 CheckStake() : new proof-of-stake block found
hash: eb973b1a26ddef80613ff63ccbad53318e058804ddc279f9c67f3c5cdce144f2
proofhash: 0000000000000000000000000000000000000000000000000000000000000000
target: 0000000000000000000000000000000000000000000000000000000000000000
2016-06-28 07:27:51 CBlock(hash=eb973b1a26ddef80613ff63ccbad53318e058804ddc279f9c67f3c5cdce144f2, ver=7, hashPrevBlock=13f7c9ef7bdccc069dbb668a6f511f6c64774a2ef35180c73447898fa6ea752b, hashMerkleRoot=e96ccfb74ce52631528d8f958c8b33d1bf16391a64223cd8a342257871fde9e1, nTime=1467098864, nBits=1e0fffff, nNonce=0, vtx=2, vchBlockSig=3044022030fdd231c56a0d46ce72d967011bafb7c7595ac21fb5c476fd694d564b40865f02201b826181c673d8039291e9e9209f916d7f97172f0d51557d9b8e3805dafbee6f)
Coinbase(hash=669a7845588d6559d4493d47fbda1c82775dbf34a1656fb1772a7188391df769, nTime=1467098864, ver=1, vin.size=1, vout.size=1, nLockTime=0)
CTxIn(COutPoint(0000000000, 4294967295), coinbase 024430)
CTxOut(empty)
Coinstake(hash=ee8e3ffd2dd47d32a29ebb6fed69d8d077c5ad9aa4158e63e1bf7d4e7c4545d7, nTime=1467098864, ver=1, vin.size=1, vout.size=4, nLockTime=0)
CTxIn(COutPoint(fa44aa571e, 1), scriptSig=3045022100d5a4570535e1eb)
CTxOut(empty)
CTxOut(nValue=25000.67, scriptPubKey=03cda1fc28c99a53c2a361ab031cec49514304333b3c99df4d48ebd01e7af9324b OP_CHECKSIG)
CTxOut(nValue=25000.67000487, scriptPubKey=03cda1fc28c99a53c2a361ab031cec49514304333b3c99df4d48ebd01e7af9324b OP_CHECKSIG)
CTxOut(nValue=1.17000487, scriptPubKey=)
vMerkleTree: 669a7845588d6559d4493d47fbda1c82775dbf34a1656fb1772a7188391df769 ee8e3ffd2dd47d32a29ebb6fed69d8d077c5ad9aa4158e63e1bf7d4e7c4545d7 e96ccfb74ce52631528d8f958c8b33d1bf16391a64223cd8a342257871fde9e1
Regards
OK now we have a windows wallet - that's great. Anyway the linux deamon , running as full node and tried to run as masternode, didn't produce any blocks - after 12 hours we only have 7 new Blocks ...
Regards
Regards
I get continuously the following error even if i have libevent built.
Dunno what could be the problem.
Edit: BTW i have a prebuilt version of secp256k, which was working with many coins before. I can send it to you and you can give a try.
Code:
atdsrc\tor\compat_libevent.h:18:25: fatal error: event2/util.h: No such file or
directory
Dunno what could be the problem.
Edit: BTW i have a prebuilt version of secp256k, which was working with many coins before. I can send it to you and you can give a try.
This is why we are in a bit of a pickle. ok
looking at your backslashes i assume your building on Windows... Basically you need to have the event libs compiled
basic steps...
1) download the source from here http://libevent.org/
2) extract using tar xvfz in MSYS
3) using MSYS perform the usual stuff...
./autogen.sh
./configure
make
make install (as long as you have autoreconf installed this will move the libs and headers into the correct MinGW paths.
4) ensure the MinGW lib and include paths are specified in the mojocoin.pro recipe
Then try building again
. How could i check if libevent is build correctly? i can't get to much information from make verify
generally the event libs will build or you'll see an error. if make install worked correctly you'll find the libs and headers in these paths
(note these are just a couple of examples. there are many more event libs and headers that should be in these paths)
If they dont exist, the error you get when building a wallet nearly always fails on event2\util.h file is missing, so this is a good place to start looking
1 BTC bounty
We are trying to build a Windows V2MOJO wallet from this repo but we get a keep a secp256k dependency error.
https://github.com/bryceweiner/mojocoin/
Can someone build a working Windows wallet? 1 BTC for you !!!!
We are trying to build a Windows V2MOJO wallet from this repo but we get a keep a secp256k dependency error.
https://github.com/bryceweiner/mojocoin/
Can someone build a working Windows wallet? 1 BTC for you !!!!
@EBK1000, I thought you were the dev ...
He is the dev but not highly skilled to solved a very complicated wallet problem. The good thing he is offering a big reward of 1 btc. And this only proves he's still highly committed in this project.
1 BTC bounty
We are trying to build a Windows V2MOJO wallet from this repo but we get a keep a secp256k dependency error.
https://github.com/bryceweiner/mojocoin/
Can someone build a working Windows wallet? 1 BTC for you !!!!
We are trying to build a Windows V2MOJO wallet from this repo but we get a keep a secp256k dependency error.
https://github.com/bryceweiner/mojocoin/
Can someone build a working Windows wallet? 1 BTC for you !!!!
@EBK1000, I thought you were the dev ...
the coins were sent to a yobit wallet and i guess it is V1 can anyone please help me
I get continuously the following error even if i have libevent built.
Dunno what could be the problem.
Edit: BTW i have a prebuilt version of secp256k, which was working with many coins before. I can send it to you and you can give a try.
Code:
atdsrc\tor\compat_libevent.h:18:25: fatal error: event2/util.h: No such file or
directory
Dunno what could be the problem.
Edit: BTW i have a prebuilt version of secp256k, which was working with many coins before. I can send it to you and you can give a try.
This is why we are in a bit of a pickle. ok
looking at your backslashes i assume your building on Windows... Basically you need to have the event libs compiled
basic steps...
1) download the source from here http://libevent.org/
2) extract using tar xvfz in MSYS
3) using MSYS perform the usual stuff...
./autogen.sh
./configure
make
make install (as long as you have autoreconf installed this will move the libs and headers into the correct MinGW paths.
4) ensure the MinGW lib and include paths are specified in the mojocoin.pro recipe
Then try building again
. How could i check if libevent is build correctly? i can't get to much information from make verify
Address MGfmtNPSk9mFABjtuQF8xizJ2DTgxrRLNy Send Mojocoin
Balance 13,999.989984 MOJO
Rich List Rank 19 at block 12355 with 13,999.989984 MOJO
Guesstimated Wallet none
Received 13,999.989984 MOJO in 1 transactions
Sent 0.0 MOJO in 0 transactions
and it says not yet redeemed says at block 12355
Hash 828a86c78f457bdf68e74459efe720c91e905f0a8a6c7befe4aabb5d328df159
Block Height 5323 (7033 confirmations)
Block Date/Time 2016-06-22 00:22:25
Total Output 78,636.15893029 MOJO
Fees 0.0001 MOJO
Inputs / Outputs
Raw Transaction
Inputs
Index Previous output Address Amount
0 6927b689741188ba...:0 MWMymJas9PKLP98Wnfkde1Mea4pppbU2ii 78,636.15903029 MOJO
Outputs
Index Redeemed in Address Amount
0 Not yet redeemed MGfmtNPSk9mFABjtuQF8xizJ2DTgxrRLNy 13,999.989984 MOJO
1 b0ebd9c1a57de126... MHWi7XTnvAABCwFf57aw363mGCbhF1YQpS 64,636.16894629 MOJO
I get continuously the following error even if i have libevent built.
Dunno what could be the problem.
Edit: BTW i have a prebuilt version of secp256k, which was working with many coins before. I can send it to you and you can give a try.
Code:
atdsrc\tor\compat_libevent.h:18:25: fatal error: event2/util.h: No such file or
directory
Dunno what could be the problem.
Edit: BTW i have a prebuilt version of secp256k, which was working with many coins before. I can send it to you and you can give a try.
This is why we are in a bit of a pickle. ok
looking at your backslashes i assume your building on Windows... Basically you need to have the event libs compiled
basic steps...
1) download the source from here http://libevent.org/
2) extract using tar xvfz in MSYS
3) using MSYS perform the usual stuff...
./autogen.sh
./configure
make
make install (as long as you have autoreconf installed this will move the libs and headers into the correct MinGW paths.
4) ensure the MinGW lib and include paths are specified in the mojocoin.pro recipe
Then try building again
Jump to: