Multibit wallet problem | Bitcointalksearch.org

Hem4Tic1

newbie

Activity: 28

Merit: 0

OK GUYS GOOD NEWS,

The funds now shop up in my electrum! I think it is because of the 0.001 bitcoin you sent me, thanks for that!

It's funny because it says I received the 0.31 btc at the 17th and the 0.001 at the 19th, but they appeared at the same time

Thanks for all the help!

cp1

hero member

Activity: 616

Merit: 500

Stop using branwallets

It's crazy that you can't get the funds to show up. I'd ask you to PM me the private key and I'll send you the funds, but I don't know if I want to be responsible for that.

orymh

full member

Activity: 167

Merit: 100

I knew there was a troubleshooting step I was forgetting: You can try connecting to a different Electrum server, just in case the one you're connected to is misbehaving. (This also has the handy side effect of forcing Electrum to update your balance.) Click on the green network dot, click on any server in the list, and click OK. It should take a minute or less for the light to go back to green.

orymh

full member

Activity: 167

Merit: 100

Turned up an interesting possibility: apparently people have had a similar problem before with imported addresses in Electrum. The solution was to send additional funds to the same address. Once Electrum saw the new transaction, it updated the total balance.

I've just sent .001 BTC to 17xSPe9avt1S5uL1Dtedoj7dQD6DgYozx1. We'll see if that does the trick once the new transaction is confirmed. One confirmation so far.

Hem4Tic1

newbie

Activity: 28

Merit: 0

Quote from: orymh on June 19, 2013, 12:04:19 PM

This is an extremely weird issue. If 17xSPe9avt1S5uL1Dtedoj7dQD6DgYozx1 is showing up in your imported addresses, and Electrum is connected, there should be no way for it to show a zero balance, because both blockexplorer.com and blockchain.info's address search agree that that address has a balance of slightly over .31 BTC.

You can tell for sure whether Electrum is connected by looking at the lower right-hand corner of the Electrum window. You should have a green dot there. If it's another color, then Electrum isn't connected properly, and that would explain why it isn't reflecting your balance yet.

Edit: I'll be unavailable for the next few hours, but I'll check in again when I can. I'm absolutely fascinated by this problem. I know this is no fun for you, but I love the strange ones. Grin

The dot in the corner is green Angry

orymh

full member

Activity: 167

Merit: 100

This is an extremely weird issue. If 17xSPe9avt1S5uL1Dtedoj7dQD6DgYozx1 is showing up in your imported addresses, and Electrum is connected, there should be no way for it to show a zero balance, because both blockexplorer.com and blockchain.info's address search agree that that address has a balance of slightly over .31 BTC.

You can tell for sure whether Electrum is connected by looking at the lower right-hand corner of the Electrum window. You should have a green dot there. If it's another color, then Electrum isn't connected properly, and that would explain why it isn't reflecting your balance yet.

Edit: I'll be unavailable for the next few hours, but I'll check in again when I can. I'm absolutely fascinated by this problem. I know this is no fun for you, but I love the strange ones. Grin

Hem4Tic1

newbie

Activity: 28

Merit: 0

I see the addresses are added to my receiving addresses but my balance is 0 BTC

Hem4Tic1

newbie

Activity: 28

Merit: 0

Quote from: orymh on June 19, 2013, 11:43:30 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:41:30 AM

Should I create a new wallet when I finished downloading electrum or restore an existing one?

I'd start with a new wallet, then import your key.

In Electrum, the import process is:
1. Go to Import->Private Keys.
2. Enter your Electrum wallet password.
3. Paste your key, without the date and extra stuff, into the box and click "Import".

Ok I imported the keys and electrum said they are imported, but I don't see anything happening?..

orymh

full member

Activity: 167

Merit: 100

Quote from: Hem4Tic1 on June 19, 2013, 11:41:30 AM

Should I create a new wallet when I finished downloading electrum or restore an existing one?

I'd start with a new wallet, then import your key.

In Electrum, the import process is:
1. Go to Import->Private Keys.
2. Enter your Electrum wallet password.
3. Paste your key, without the date and extra stuff, into the box and click "Import".

Hem4Tic1

newbie

Activity: 28

Merit: 0

Should I create a new wallet when I finished downloading electrum or restore an existing one?

Hem4Tic1

newbie

Activity: 28

Merit: 0

Quote from: orymh on June 19, 2013, 11:35:08 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:27:37 AM

Ok wtf, when I enter the key at import wallet it says it's an invalid format Sad

Ouch. I don't know what else to suggest. MultiBit doesn't officially offer support, but you could try their resources here: https://multibit.org/support.html.

I'd be willing to try imports for you in a couple of different clients to see if I can get it to work, but that would mean trusting me with your private key. If we go that route, the process would be:

You give me the key via PM.
I import it, if I can.
If I manage to get it working, I'll send your funds to another address of yours, because once you've given me your private key, it's compromised and you shouldn't use it again.

If I were you, I'd only take me up on that offer after exhausting all other options, because you don't know me and you have no reason to trust me. Before you go handing your key over to me or anyone, I'd suggest you try a local install of Electrum to see if it'll import successfully there. I can walk you through that if you'd like.

Ok thanks you are very helpfull. I will go and install Electrum first then

orymh

full member

Activity: 167

Merit: 100

Quote from: Hem4Tic1 on June 19, 2013, 11:27:37 AM

Ok wtf, when I enter the key at import wallet it says it's an invalid format Sad

Ouch. I don't know what else to suggest. MultiBit doesn't officially offer support, but you could try their resources here: https://multibit.org/support.html.

I'd be willing to try imports for you in a couple of different clients to see if I can get it to work, but that would mean trusting me with your private key. If we go that route, the process would be:

You give me the key via PM.
I import it, if I can.
If I manage to get it working, I'll send your funds to another address of yours, because once you've given me your private key, it's compromised and you shouldn't use it again.

If I were you, I'd only take me up on that offer after exhausting all other options, because you don't know me and you have no reason to trust me. Before you go handing your key over to me or anyone, I'd suggest you try a local install of Electrum to see if it'll import successfully there. I can walk you through that if you'd like.

Hem4Tic1

newbie

Activity: 28

Merit: 0

Oh the time has to be in it too? let me try

edit: Still says wrong format :s

Hem4Tic1

newbie

Activity: 28

Merit: 0

Ok wtf, when I enter the key at import wallet it says it's an invalid format Sad

orymh

full member

Activity: 167

Merit: 100

Quote from: Hem4Tic1 on June 19, 2013, 11:25:19 AM

Quote from: orymh on June 19, 2013, 11:23:49 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:21:25 AM

Quote from: orymh on June 19, 2013, 11:18:07 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:15:57 AM

Should I try to paste the code at the open field at ''Import wallet''?

That appears to work fine too, with the entire contents of a plain text export.

what do you exactly mean with the enitire contents of a pain text export? Should I add more then just the key?

You only need the key line (the line that doesn't start with '#'). You can get away with copying everything from the file and pasting it in.

Just to double-check that you've got a plain-text export, an encrypted export looks like this:
U2FsdGVkX1+m9aEqqzUZ3hOfVucdHc4/XnL4dEjHKpBRR41txwWaVzmx5ATuddw6yIkJGL+6aw
0XcYKgf3mlC67sHLYAe8CBI4hkDZC8washXCbHgarrDfZiCFPaP5e

...and a plain text export looks like this:
# KEEP YOUR PRIVATE KEYS SAFE !
# Anyone who can read this file can spend your bitcoin.
#
# Format:
# [[]]
#
# The Base58 encoded private keys are the same format as
# produced by the Satoshi client/ sipa dumpprivkey utility.
#
# Key createdAt is in UTC format as specified by ISO 8601
# e.g: 2011-12-31T16:42:00Z . The century, 'T' and 'Z' are mandatory
#
L31L1BsnM6SGyXtMjspQMQsJfNRw6gtE8TbyzoaoSXzaVzxbmRe 2013-06-19T16:18:50Z <--Copy and paste any lines that look like this
# End of private keys

And no, that's not my real private key. Wink

I do ahve a plain text file, exactly like that but then with 2 keys

L31L1BsnM6SGyXtMjspQMQsJfNRw6gtE8TbyzoaoSXzaVzxbmRe 2013-06-19T16:18:50Z <--Copy and paste any lines that look like this into the big blank in "Import Wallet".

Hem4Tic1

newbie

Activity: 28

Merit: 0

Quote from: orymh on June 19, 2013, 11:23:49 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:21:25 AM

Quote from: orymh on June 19, 2013, 11:18:07 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:15:57 AM

Should I try to paste the code at the open field at ''Import wallet''?

That appears to work fine too, with the entire contents of a plain text export.

what do you exactly mean with the enitire contents of a pain text export? Should I add more then just the key?

You only need the key line (the line that doesn't start with '#'). You can get away with copying everything from the file and pasting it in.

Just to double-check that you've got a plain-text export, an encrypted export looks like this:
U2FsdGVkX1+m9aEqqzUZ3hOfVucdHc4/XnL4dEjHKpBRR41txwWaVzmx5ATuddw6yIkJGL+6aw
0XcYKgf3mlC67sHLYAe8CBI4hkDZC8washXCbHgarrDfZiCFPaP5e

...and a plain text export looks like this:
# KEEP YOUR PRIVATE KEYS SAFE !
# Anyone who can read this file can spend your bitcoin.
#
# Format:
# [[]]
#
# The Base58 encoded private keys are the same format as
# produced by the Satoshi client/ sipa dumpprivkey utility.
#
# Key createdAt is in UTC format as specified by ISO 8601
# e.g: 2011-12-31T16:42:00Z . The century, 'T' and 'Z' are mandatory
#
L31L1BsnM6SGyXtMjspQMQsJfNRw6gtE8TbyzoaoSXzaVzxbmRe 2013-06-19T16:18:50Z
# End of private keys

And no, that's not my real private key. Wink

I do ahve a plain text file, exactly like that but then with 2 keys

orymh

full member

Activity: 167

Merit: 100

Quote from: Hem4Tic1 on June 19, 2013, 11:21:25 AM

Quote from: orymh on June 19, 2013, 11:18:07 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:15:57 AM

Should I try to paste the code at the open field at ''Import wallet''?

That appears to work fine too, with the entire contents of a plain text export.

what do you exactly mean with the enitire contents of a pain text export? Should I add more then just the key?

You only need the key line (the line that doesn't start with '#'). You can get away with copying everything from the file and pasting it in.

Just to double-check that you've got a plain-text export, an encrypted export looks like this:
U2FsdGVkX1+m9aEqqzUZ3hOfVucdHc4/XnL4dEjHKpBRR41txwWaVzmx5ATuddw6yIkJGL+6aw
0XcYKgf3mlC67sHLYAe8CBI4hkDZC8washXCbHgarrDfZiCFPaP5e

...and a plain text export looks like this:
# KEEP YOUR PRIVATE KEYS SAFE !
# Anyone who can read this file can spend your bitcoin.
#
# Format:
# [[]]
#
# The Base58 encoded private keys are the same format as
# produced by the Satoshi client/ sipa dumpprivkey utility.
#
# Key createdAt is in UTC format as specified by ISO 8601
# e.g: 2011-12-31T16:42:00Z . The century, 'T' and 'Z' are mandatory
#
L31L1BsnM6SGyXtMjspQMQsJfNRw6gtE8TbyzoaoSXzaVzxbmRe 2013-06-19T16:18:50Z <----This is the only line you need to copy and paste.
# End of private keys

And no, that's not my real private key. Wink

Hem4Tic1

newbie

Activity: 28

Merit: 0

Quote from: orymh on June 19, 2013, 11:18:07 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:15:57 AM

Should I try to paste the code at the open field at ''Import wallet''?

That appears to work fine too, with the entire contents of a plain text export.

what do you exactly mean with the enitire contents of a pain text export? Should I add more then just the key?

Hem4Tic1

newbie

Activity: 28

Merit: 0

Quote from: orymh on June 19, 2013, 11:16:22 AM

Quote from: Hem4Tic1 on June 19, 2013, 11:08:15 AM

Quote from: orymh on June 19, 2013, 11:02:32 AM

Quote from: Hem4Tic1 on June 19, 2013, 10:59:11 AM

Quote from: orymh on June 19, 2013, 10:47:35 AM

Quote from: Hem4Tic1 on June 19, 2013, 08:27:50 AM

Quote from: cp1 on June 19, 2013, 07:46:12 AM

It says it accepts all sorts of private keys, so you should be fine. It doesn't matter whether you've imported it into something else as long as your bitcoins are at the address associated with the key you can access them with that key from any client.

Ok I made a blockchain.info wallet, but when I go to Import/Export -> Import Private key I don't know how to put the private key in, how do I do this?

This will require a plain text export of your private key from MultiBit. The steps for this:
1. In MultiBit, go to Tools->Export Private Keys.
2. In the "Password of export file" section, select "Do not password protect export file."
3. Make a note of the destination filename - that's where your key will be.
4. Click "Export private keys."

The export file will be a text file. Even though it has the .key extension, you can open it in Notepad or Wordpad or any other text editor. Open the file and copy the key, but don't include the date or the stuff after it - Blockchain.info will choke on it.

On Blockchain.info, log in to your wallet, go to Import/Export, and paste your key into the "Add Private Key" blank. After you click "Add Private Key", you're given the option to import the key or automatically transfer funds. Either one should work fine. Then you're done, and your funds should show up in your Blockchain.info wallet - instantly, if you chose to import directly rather than "sweeping" to a new key.

I think I mentioned this in a previous post, but it's important enough to repeat: delete that export file as soon as you're done with it. If anyone gets their hands on your private key, they can take your money.

When I open the export file with the private keys I see 2 keys given, which one should I take?

If you have two keys, you'll want to take both of them just to be sure you've got the one you need. Just copy/paste/import each of them separately.

It fails to import the key; it says this feature or method isnt supported

That's bizarre. I haven't managed to make their import fail with that message. Did you choose the Sweep or the Import option, or did it not get that far?

Didn't get that option, just the error message

orymh

full member

Activity: 167

Merit: 100

Quote from: Hem4Tic1 on June 19, 2013, 11:15:57 AM

Should I try to paste the code at the open field at ''Import wallet''?

That appears to work fine too, with the entire contents of a plain text export.

Topic: Multibit wallet problem (Read 3556 times)