Topic: 📈 NastyFans: The Bitcoin Enthusiast Fan Club (est. 2012) - page 122. (Read 958995 times)

I went ahead and placed an order for one of these:
http://www.blackarrowsoftware.com/store/prospero-x-3.html

Best part is that it adds 2TH/s and 0 debt.

All pre-orders are guaranteed to be protected against any price decrease. If at any time, during the pre-order period, we drop the price under what you have already paid, you will be compensated by receiving more X-3 mining machines.

With BFL possibly delayed and CoinTerra not having shipped their first batch yet, I am getting a bit antsy.  I was hoping that KnC would have allowed us to order their next get rig, but by refusing to take orders from new customers, that puts us in a wait for the end of the line with them.  For that reason, I'm considering placing an order for this:
http://www.blackarrowsoftware.com/store/prospero-x-3.html

oops, thanks for catching that. should be .09 c/kWh   http://mining.thegenesisblock.com/a/0fc5f57e7f  I'm not sure what Nasty's rate is but it's likely higher than .09 but lower than .9

I'm not sure what Nasty's rate is but it's likely higher than .09 but lower than .9

With BFL possibly delayed and CoinTerra not having shipped their first batch yet, I am getting a bit antsy.  I was hoping that KnC would have allowed us to order their next get rig, but by refusing to take orders from new customers, that puts us in a wait for the end of the line with them.  For that reason, I'm considering placing an order for this:
http://www.blackarrowsoftware.com/store/prospero-x-3.html

I've cashed out our alt coins and donated around 1/2 the funds to our holdings address to help repay debt.  The other 1/2 I currently have sitting in USD.  I was planning to wait for an LTC ASIC to become available, but I think we could have enough funds to place an order with Black Arrow and still be able to afford an LTC ASIC without taking on any more debt.  Thoughts?

90c/kWh?

I've cashed out our alt coins and donated around 1/2 the funds to our holdings address to help repay debt.  The other 1/2 I currently have sitting in USD.  

With BFL possibly delayed and CoinTerra not having shipped their first batch yet, I am getting a bit antsy.  I was hoping that KnC would have allowed us to order their next get rig, but by refusing to take orders from new customers, that puts us in a wait for the end of the line with them.  For that reason, I'm considering placing an order for this:
http://www.blackarrowsoftware.com/store/prospero-x-3.html

The numbers seem to crunch well provided it is delivered on time. http://mining.thegenesisblock.com/a/b550be5d33

With BFL possibly delayed and CoinTerra not having shipped their first batch yet, I am getting a bit antsy.  I was hoping that KnC would have allowed us to order their next get rig, but by refusing to take orders from new customers, that puts us in a wait for the end of the line with them.  For that reason, I'm considering placing an order for this:
http://www.blackarrowsoftware.com/store/prospero-x-3.html

I've cashed out our alt coins and donated around 1/2 the funds to our holdings address to help repay debt.  The other 1/2 I currently have sitting in USD.  I was planning to wait for an LTC ASIC to become available, but I think we could have enough funds to place an order with Black Arrow and still be able to afford an LTC ASIC without taking on any more debt.  Thoughts?

He who holds the coin owns it.  They can be transferred as easy as handing them to someone else.  The only issue is if people buy them second hand and want to control the vote of the coin on future polls.  In that case, we have to be notified.  I'd recommend buying the coin directly from NastyFans.org if you care to control the vote, or make sure the original coin buyer lets us know the coin has been transferred.  It really isn't something you need to be concerned with.

I actually don't think there are many other possibilities, if the intent is that the seats can be transferred physically by transferring the coin, and the rest would be similar such as having a trusted local representative verify possession of the coin. The only other way would be to pull the seal, which is obviously undesirable.

If the intent is that ownership of the seats not be transferred by physically transferring the coins, that should be explained clearly to coin owners/buyers.

No, I received no notification, which is disturbing.  Looking around the forum, I can't seem to find anyone who did receive a notification...

Sorry - didn't mean to upset anyone. The fact is that we ordered more products from them and I just wanted to find out if we had been included in the "first customers" notification that BFL Josh "said" went out.  Just as an indication of whether we made it in the bullet run or not..

http://webcache.googleusercontent.com/search?q=cache:T8oRFTPnbssJ:https://forums.butterflylabs.com/announcements/4414-monarch-information.html&client=firefox-a&hl=en&gl=us&strip=1

Just to update everyone on where we stand with the Monarch at the moment.

Current chip production has an expected delivery date in early/first half of December. We expect to have chips at that time and hope to have our first units shipped out the door by the end of December. We did not reach our goal of November delivery. Unlike our first generation ASIC devices, we already have the vendors in place and ready to go, along with the substrate design and manufacturing slotted in and geared up. Right now, we are not anticipating any issues but unexpected things do pop up. If they do, I will let people know as soon as I have definitive information regarding that, otherwise we are on target for a December release. If anything changes, I will let everyone know, via this thread, as soon as I have the information.

Let me reiterate that if you are uncomfortable with pre-ordering for cutting edge, custom designed technology and all the risks that it implies, please do not place a pre-order and wait until the products are shipping and available. If you do choose to pre-order, please understand that unforseen problems and delays can and do happen and we will do our best to alert everyone to them when we encounter them and have had time to assess what the impact will be on the timeline.

Our production capacity is geared up and ready to go. With the extreme simplicity of the Monarch compared to our 65nm product line, we do not anticipate any difficulties in getting units built and out the door in a rapid fashion. Compared to our current generation, assuming no parts shortages, we should be able to product more than 1000 Monarchs per day. For reference, the Monarch should use ~12 screws and two discrete parts (board and HSF), compared to even our most simple device, the Jalapeno, which has over 20 discrete parts, assembly is trivial and should pose no issues.

No, I received no notification, which is disturbing.  Looking around the forum, I can't seem to find anyone who did receive a notification...

I think there are many possibilities to resolve disputes. The policy only concerned about president rights to suspend voting rights. This is a important tool until disputes are resolved.

Sorry - didn't mean to upset anyone. The fact is that we ordered more products from them and I just wanted to find out if we had been included in the "first customers" notification that BFL Josh "said" went out.  Just as an indication of whether we made it in the bullet run or not..