SERO
6x1080Ti
G4400 CPU load 100%
Win 10, 4GB RAM
Topic: NBMiner v42.2, 100% LHR unlock for ETH mining ! - page 21. (Read 54340 times)
@nebutech
Your miner works on C29 for a few minutes then forces my rig to switch to Cuckarood29 although the fork hasn't yet happened!!
:-(
Your miner works on C29 for a few minutes then forces my rig to switch to Cuckarood29 although the fork hasn't yet happened!!
:-(
Did you use config file to start?
Try add
"grin29-fork-height": 262080,
to the json file.
Or start with cmdline options.
Had this same issue on HiveOS. Added this to the Extra config arguments - "grin29-fork-height": 262080
Its working fine now,
Thanks
@nebutech
Your miner works on C29 for a few minutes then forces my rig to switch to Cuckarood29 although the fork hasn't yet happened!!
:-(
Your miner works on C29 for a few minutes then forces my rig to switch to Cuckarood29 although the fork hasn't yet happened!!
:-(
Did you use config file to start?
Try add
"grin29-fork-height": 262080,
to the json file.
Or start with cmdline options.
@nebutech
Your miner works on C29 for a few minutes then forces my rig to switch to Cuckarood29 although the fork hasn't yet happened!!
:-(
Your miner works on C29 for a few minutes then forces my rig to switch to Cuckarood29 although the fork hasn't yet happened!!
:-(
Try again with the latest updated binaries.
out of memory
Try again with the latest updated binaries.
waiting with hope
can u make 4gb solver grin29 for p102 on win10?
p102 should work now with v24.1
can u make 4gb solver grin29 for p102 on win10?
v24.1 released with bug fix.
- Fix lower hashrate than previous version for Grin29 & AE on 10xx 6GB cards
- Fix mining Grin29 AE on Turing 6GB Cards on Win10.
- Fix the disfunction of auto-reboot when GPU error happens.
- Fix start using json config file.
- Change the GPU MEM size display upon launch from Total Size to Available Size.
- Fix lower hashrate than previous version for Grin29 & AE on 10xx 6GB cards
- Fix mining Grin29 AE on Turing 6GB Cards on Win10.
- Fix the disfunction of auto-reboot when GPU error happens.
- Fix start using json config file.
- Change the GPU MEM size display upon launch from Total Size to Available Size.
New version v24.0 released! 
- Support Grin29 fork on 17th, July.
- When using algo `cuckaroo`, v24.0 will do an automatically switch to `cuckarood` on height 262080.
- Add a temporary option `-grin29-fork-height`, user can test the auto-switch by setting this option to lower height value.
- Improve performance on Grin29 & AE.
- Add support for mining `SERO`, algo `progpow_sero`.
- Add option `-intensity` to set the intensity level for each GPU.
- Add option `-fidelity-timeframe` to customize the timeframe for fidelity calculation.
- Add option `-log-file` to set a specified log filename.
- Add option `-no-nvml` to close the periodical query for GPU status.
- Add new method to turn on NiceHash protocol, `nicehash+tcp://`
- Also compatible with previous url based method.
- Minor improvement and bug fix.
- Support Grin29 fork on 17th, July.
- When using algo `cuckaroo`, v24.0 will do an automatically switch to `cuckarood` on height 262080.
- Add a temporary option `-grin29-fork-height`, user can test the auto-switch by setting this option to lower height value.
- Improve performance on Grin29 & AE.
- Add support for mining `SERO`, algo `progpow_sero`.
- Add option `-intensity` to set the intensity level for each GPU.
- Add option `-fidelity-timeframe` to customize the timeframe for fidelity calculation.
- Add option `-log-file` to set a specified log filename.
- Add option `-no-nvml` to close the periodical query for GPU status.
- Add new method to turn on NiceHash protocol, `nicehash+tcp://`
- Also compatible with previous url based method.
- Minor improvement and bug fix.
Welcome to minerstat, NBMiner.
hi guys, I‘m mining swap on luckypool. thing is: diff is set to 1 from pool side. is there any parameter which I can use miner-wise to set the diff to 16?
https://swap2.luckypool.io/how-to-mine#coin-info
There is a poolside instruction for this.
hi guys, I‘m mining swap on luckypool. thing is: diff is set to 1 from pool side. is there any parameter which I can use miner-wise to set the diff to 16?
Hi all,
Been racking my brain for weeks trying to figure out why my 2080 ti's crash mining grin31...I have a couple machines with 1080ti's and they run wonderfully, but this machine has 3 cards, 1 x 1080ti and 2 x 2080ti's and within a min or so of firing up the miner one of the 2018ti's crash - fans go to full bore and 0's show in afterburner. The machine is quite powerful with an 8 core cpu and 64 GB of RAM. I've got VRAM set to 80GB, my machines with 6 x 1080ti's runs great with 70GB...Power supply is probably on the edge at 850 watts, but I monitor the usage and run the cards at 65%..And the wattage stays below 700 ish on the machine...I've uninstalled drivers, swapped cables, tried different drivers, lowered the clocks...Any tips on what else I could try would be greatly appreciated. It will mine x16r for weeks without an issue...It's not just this miner, it's all miners for grin31, but I posted here because this miner is the best which means this thread probably has some real smart folks...
Been racking my brain for weeks trying to figure out why my 2080 ti's crash mining grin31...I have a couple machines with 1080ti's and they run wonderfully, but this machine has 3 cards, 1 x 1080ti and 2 x 2080ti's and within a min or so of firing up the miner one of the 2018ti's crash - fans go to full bore and 0's show in afterburner. The machine is quite powerful with an 8 core cpu and 64 GB of RAM. I've got VRAM set to 80GB, my machines with 6 x 1080ti's runs great with 70GB...Power supply is probably on the edge at 850 watts, but I monitor the usage and run the cards at 65%..And the wattage stays below 700 ish on the machine...I've uninstalled drivers, swapped cables, tried different drivers, lowered the clocks...Any tips on what else I could try would be greatly appreciated. It will mine x16r for weeks without an issue...It's not just this miner, it's all miners for grin31, but I posted here because this miner is the best which means this thread probably has some real smart folks...
Did you resolve the problem ? I'm having the same issue .
Any way for gtx1060 3G to mine Cuckaroo C29?
thanks
thanks
is 7% rejected shares considered to be normal? I have 7x1080ti rig with overclock that usually works fine on other miners. temps are low. oc should be fine. mem -500. Tho internet is really bad - farm is on 4g net probably heavily loaded. I have meesages like share sent to late or something like that. is there way to check why there are such rejected shares? I am mining on hiveos, latest version.
and stuill with those 7% rejected shares poolside shows better hashrate than bminer.
and stuill with those 7% rejected shares poolside shows better hashrate than bminer.
Please join our Discord channel and get more responsive discussion.
Discord: https://discord.gg/3gDU8Kf
Jump to: