Author

Topic: NEM (XEM) Official Thread - 100% New Code - Easy To Use APIs - page 1103. (Read 2985369 times)

hero member
Activity: 687
Merit: 500
I agree, i cant figure out how to get my delegated harvesting to work either. I have harvested some blocks but all have been harvested with local harvesting, delegated harvesting will give me no blocks.
I have set my node to 79.76.113.22

Maybe the node is too often a block or two behind. You can try one of the alice servers.
sr. member
Activity: 412
Merit: 251
Thanks for the explanation/clarification. I forgot to configure the settings. TBH, I didnt see it guides at ournem, maybe there were written somewhere. Anyway, I clicked activate delegated harvesting without any settings. So, It will be harvesting on local node.

I think I have to change settings to harvest on a remote node when 360 blocks passed for activation. Then, I should reactivate for delegated harvesting with new settings, is that correct?

You don't need to reactivate delegate harvesting after changing the settings. Just change settings to point to a remote node and start harvesting.

Thanks for the answer. I was really confused about how delegated harvesting works. I think it will be good if this questions/answers are added to FAQ at ournem.
Regards...

It's all in the tutorials...

http://blog.nem.io/how-local-and-delegated-harvesting-works/
http://blog.nem.io/how-to-use-delegated-harvesting/

I have already read them at least twice. There are no explanations about questions like:

1-) How can we set remote node IP? (Even if its easy , I thought it was done by client automatically when there is no info about it)
2-) When there is a problem on remote node , do we need to tx the importance or is it just enough to change the settings?

Or more technical questions like:
3-) Where the importance fee goes? Does it burn or goes some privileged nodes?
4-) When saying its use to safe remote harvesting "there is nothing leave from your wallet", is that totally correct or some encrypted data goes somewhere to check/verify the activation? If first is correct, then is it possible to manipulate with some js to inject some XSS?

I believe these type of q/a can be added. Tutorial easy to follow but gives very brief information.

Kind Regards...
hero member
Activity: 980
Merit: 1001
MrPortman,
I don't mean to insult you, but I'm having a hard time understanding your English.
As a result, I don't understand your explanation of the NEMCredits.

I must be having the same problem as it makes no sense to me whatsoever  Undecided
legendary
Activity: 1918
Merit: 1001
Thanks for the explanation/clarification. I forgot to configure the settings. TBH, I didnt see it guides at ournem, maybe there were written somewhere. Anyway, I clicked activate delegated harvesting without any settings. So, It will be harvesting on local node.

I think I have to change settings to harvest on a remote node when 360 blocks passed for activation. Then, I should reactivate for delegated harvesting with new settings, is that correct?

You don't need to reactivate delegate harvesting after changing the settings. Just change settings to point to a remote node and start harvesting.

Thanks for the answer. I was really confused about how delegated harvesting works. I think it will be good if this questions/answers are added to FAQ at ournem.
Regards...

I agree, i cant figure out how to get my delegated harvesting to work either. I have harvested some blocks but all have been harvested with local harvesting, delegated harvesting will give me no blocks.
I have set my node to 79.76.113.22
newbie
Activity: 31
Merit: 0
MrPortman,
I don't mean to insult you, but I'm having a hard time understanding your English.
As a result, I don't understand your explanation of the NEMCredits.
hero member
Activity: 980
Merit: 1001
Thanks for the explanation/clarification. I forgot to configure the settings. TBH, I didnt see it guides at ournem, maybe there were written somewhere. Anyway, I clicked activate delegated harvesting without any settings. So, It will be harvesting on local node.

I think I have to change settings to harvest on a remote node when 360 blocks passed for activation. Then, I should reactivate for delegated harvesting with new settings, is that correct?

You don't need to reactivate delegate harvesting after changing the settings. Just change settings to point to a remote node and start harvesting.

Thanks for the answer. I was really confused about how delegated harvesting works. I think it will be good if this questions/answers are added to FAQ at ournem.
Regards...

It's all in the tutorials...

http://blog.nem.io/how-local-and-delegated-harvesting-works/
http://blog.nem.io/how-to-use-delegated-harvesting/
sr. member
Activity: 412
Merit: 251
Thanks for the explanation/clarification. I forgot to configure the settings. TBH, I didnt see it guides at ournem, maybe there were written somewhere. Anyway, I clicked activate delegated harvesting without any settings. So, It will be harvesting on local node.

I think I have to change settings to harvest on a remote node when 360 blocks passed for activation. Then, I should reactivate for delegated harvesting with new settings, is that correct?

You don't need to reactivate delegate harvesting after changing the settings. Just change settings to point to a remote node and start harvesting.

Thanks for the answer. I was really confused about how delegated harvesting works. I think it will be good if this questions/answers are added to FAQ at ournem.
Regards...
hero member
Activity: 687
Merit: 500
Thanks for the explanation/clarification. I forgot to configure the settings. TBH, I didnt see it guides at ournem, maybe there were written somewhere. Anyway, I clicked activate delegated harvesting without any settings. So, It will be harvesting on local node.

I think I have to change settings to harvest on a remote node when 360 blocks passed for activation. Then, I should reactivate for delegated harvesting with new settings, is that correct?

You don't need to reactivate delegate harvesting after changing the settings. Just change settings to point to a remote node and start harvesting.
sr. member
Activity: 412
Merit: 251
Hi guys,
I was just trying to activate delegated harvesting. When I clicked the activate button , I saw a Nem address for Importance tx. I was curious about the selection of this address.

Is it done randomly or chosen automatically from the healtier nodes? If node is broken down how can I change my node?

That address is the account address for which you are activating the delegated harvesting. I has nothing to do with the NIS node you are connected to.

So after 360 blocks, can I select a node with IP or is it done automatically similar to importance tx?

It uses whatever node is configured in the settings at the time of activation. If you had no remote node configured then you'll be harvesting delegated on your local node.

Thanks for the explanation/clarification. I forgot to configure the settings. TBH, I didnt see it guides at ournem, maybe there were written somewhere. Anyway, I clicked activate delegated harvesting without any settings. So, It will be harvesting on local node.

I think I have to change settings to harvest on a remote node when 360 blocks passed for activation. Then, I should reactivate for delegated harvesting with new settings, is that correct?
hero member
Activity: 980
Merit: 1001
Hi guys,
I was just trying to activate delegated harvesting. When I clicked the activate button , I saw a Nem address for Importance tx. I was curious about the selection of this address.

Is it done randomly or chosen automatically from the healtier nodes? If node is broken down how can I change my node?

That address is the account address for which you are activating the delegated harvesting. I has nothing to do with the NIS node you are connected to.

So after 360 blocks, can I select a node with IP or is it done automatically similar to importance tx?

It uses whatever node is configured in the settings at the time of activation. If you had no remote node configured then you'll be harvesting delegated on your local node.
sr. member
Activity: 412
Merit: 251
Hi guys,
I was just trying to activate delegated harvesting. When I clicked the activate button , I saw a Nem address for Importance tx. I was curious about the selection of this address.

Is it done randomly or chosen automatically from the healtier nodes? If node is broken down how can I change my node?

That address is the account address for which you are activating the delegated harvesting. I has nothing to do with the NIS node you are connected to.

So after 360 blocks, can I select a node with IP or is it done automatically similar to importance tx?
hero member
Activity: 687
Merit: 500
Hi guys,
I was just trying to activate delegated harvesting. When I clicked the activate button , I saw a Nem address for Importance tx. I was curious about the selection of this address.

Is it done randomly or chosen automatically from the healtier nodes? If node is broken down how can I change my node?

That address is the account address for which you are activating the delegated harvesting. I has nothing to do with the NIS node you are connected to.
sr. member
Activity: 412
Merit: 251
Hi guys,
I was just trying to activate delegated harvesting. When I clicked the activate button , I saw a Nem address for Importance tx. I was curious about the selection of this address.

Is it done randomly or chosen automatically from the healtier nodes? If node is broken down how can I change my node?
m3
sr. member
Activity: 460
Merit: 250
as long as it can stay above 80 sats we are good Smiley
hero member
Activity: 687
Merit: 500
Use your right mouse and select "run as administrator"



Hello friends,

I am new to altcoins and need some advice.
I have installed my NEM wallet on my Windows7 and recently sent a few XEM to my wallet from an exchange.  These XEM are now showing in my NEM wallet balance.
A Launch NEM wallet icon displays in my start menu but when I try to open the wallet nothing happen.  Am I missing a step or do I need to backtrack?

Thanks.

I right clicked on "run as administrator" but still no luck.  Does it take awhile to open the wallet?


Ah I see. I also noticed that I can't open the wallet anymore. Hopefully we get a fix.

Is this with current release 0.6.31?
Can you try uninstalling the wallet and then reinstall?
hero member
Activity: 619
Merit: 500
Go Bitcoin
XEM is looking pretty healthy in terms of price. The buy support looks pretty stong. I can't see the price dropping below 70 satoshis ever again, and a lot of dumping for even 75 sat.

like what I have said before...the DUMPERS will cry later this year.......

XEM release new features in ninja mode.... XEM in itself could replace all these coins including Bitcoin...
sr. member
Activity: 490
Merit: 252
Use your right mouse and select "run as administrator"



Hello friends,

I am new to altcoins and need some advice.
I have installed my NEM wallet on my Windows7 and recently sent a few XEM to my wallet from an exchange.  These XEM are now showing in my NEM wallet balance.
A Launch NEM wallet icon displays in my start menu but when I try to open the wallet nothing happen.  Am I missing a step or do I need to backtrack?

Thanks.

I right clicked on "run as administrator" but still no luck.  Does it take awhile to open the wallet?


Ah I see. I also noticed that I can't open the wallet anymore. Hopefully we get a fix.
member
Activity: 85
Merit: 10
Use your right mouse and select "run as administrator"



Hello friends,

I am new to altcoins and need some advice.
I have installed my NEM wallet on my Windows7 and recently sent a few XEM to my wallet from an exchange.  These XEM are now showing in my NEM wallet balance.
A Launch NEM wallet icon displays in my start menu but when I try to open the wallet nothing happen.  Am I missing a step or do I need to backtrack?

Thanks.

I right clicked on "run as administrator" but still no luck.  Does it take awhile to open the wallet?

sr. member
Activity: 490
Merit: 252
Use your right mouse and select "run as administrator"



Hello friends,

I am new to altcoins and need some advice.
I have installed my NEM wallet on my Windows7 and recently sent a few XEM to my wallet from an exchange.  These XEM are now showing in my NEM wallet balance.
A Launch NEM wallet icon displays in my start menu but when I try to open the wallet nothing happen.  Am I missing a step or do I need to backtrack?

Thanks.



member
Activity: 85
Merit: 10

Hello friends,

I am new to altcoins and need some advice.
I have installed my NEM wallet on my Windows7 and recently sent a few XEM to my wallet from an exchange.  These XEM are now showing in my NEM wallet balance.
A Launch NEM wallet icon displays in my start menu but when I try to open the wallet nothing happen.  Am I missing a step or do I need to backtrack?

Thanks.


Jump to: