Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 119. (Read 289464 times)
awesome tool, time to switch from linux to windows.
Hye,
I've a problem since 2 days that I can't resolve, when I start the miner, it's locked on benchmarking and A little window open and close a few seconds later like this : https://www.noelshack.com/2018-01-2-1514888849-ininii.png
I try to put EU in the start file but after that the miner doesn't work at all, so I retry with US, different workers, different algos, etc...
What can I do now?
Thank's!
I've a problem since 2 days that I can't resolve, when I start the miner, it's locked on benchmarking and A little window open and close a few seconds later like this : https://www.noelshack.com/2018-01-2-1514888849-ininii.png
I try to put EU in the start file but after that the miner doesn't work at all, so I retry with US, different workers, different algos, etc...
What can I do now?
Thank's!
I had many problems then I increased my paging file size from 16000 to 50000 and everything is working, even neoscrypt miner which would crash before.
Hye,
I've a problem since 2 days that I can't resolve, when I start the miner, it's locked on benchmarking and A little window open and close a few seconds later like this : https://www.noelshack.com/2018-01-2-1514888849-ininii.png
I try to put EU in the start file but after that the miner doesn't work at all, so I retry with US, different workers, different algos, etc...
What can I do now?
Thank's!
I've a problem since 2 days that I can't resolve, when I start the miner, it's locked on benchmarking and A little window open and close a few seconds later like this : https://www.noelshack.com/2018-01-2-1514888849-ininii.png
I try to put EU in the start file but after that the miner doesn't work at all, so I retry with US, different workers, different algos, etc...
What can I do now?
Thank's!
just fyi, based on your source code it looks like you're using alexis78 ccminer build (x86 cuda 8.0) for x17 mining. I thought maybe this is the fastest build but it blows up with some 'can't validate on cpu + access violation' errors and shuts down. the other alexis78 build -- cuda 7.5 + x64 works fine.
testing Palgins new HSR miner for neoscrypt i have it downloading and Benchmarking but running into a issue with it not closing after completing benchmarks
you can test for yourself here: https://github.com/nemosminer/NemosMiner-v2.3/issues/130
Best Regards
Nemo
you can test for yourself here: https://github.com/nemosminer/NemosMiner-v2.3/issues/130
Best Regards
Nemo
Awesome.
Hi,
Great multimer, nice job.
I only find that when the miner switch algo, it close the miner, then start the other one.
There is some delay every-time so the GPU stop working for like 1 sec.
this give some loss.
If the new algo miner would start 1 second before the old miner close, could it solve this ?
The old miner would continue to mine while the new miner start and establish the connection.
Maybe they would work both for 1/2 a second but that should not cause problem.
You could maybe check and stop the old miner once the new one has an connection.
I no programmer but it seem doable.
Just an idea.
Great multimer, nice job.
I only find that when the miner switch algo, it close the miner, then start the other one.
There is some delay every-time so the GPU stop working for like 1 sec.
this give some loss.
If the new algo miner would start 1 second before the old miner close, could it solve this ?
The old miner would continue to mine while the new miner start and establish the connection.
Maybe they would work both for 1/2 a second but that should not cause problem.
You could maybe check and stop the old miner once the new one has an connection.
I no programmer but it seem doable.
Just an idea.
I have added a line in the file NemosMiner-v2.3.ps1 before the sleep command.
This adds a line at the bottom showing when is the last time the program checks the profitability. Not something major but I myself find it pretty useful.
Code:
Write-Host -ForegroundColor Yellow "Last Refresh: $(Get-Date)"
This adds a line at the bottom showing when is the last time the program checks the profitability. Not something major but I myself find it pretty useful.
thanks it is useful
https://github.com/nemosminer/NemosMiner-v2.3/commit/e0693778fd83e5995c07a8cc78c16b8e82e71c95
Best Regards
Nemo
testing Palgins new HSR miner for neoscrypt i have it downloading and Benchmarking but running into a issue with it not closing after completing benchmarks
you can test for yourself here: https://github.com/nemosminer/NemosMiner-v2.3/issues/130
Best Regards
Nemo
you can test for yourself here: https://github.com/nemosminer/NemosMiner-v2.3/issues/130
Best Regards
Nemo
I have added a line in the file NemosMiner-v2.3.ps1 before the sleep command.
This adds a line at the bottom showing when is the last time the program checks the profitability. Not something major but I myself find it pretty useful.
Code:
Write-Host -ForegroundColor Yellow "Last Refresh: $(Get-Date)"
This adds a line at the bottom showing when is the last time the program checks the profitability. Not something major but I myself find it pretty useful.
I'm running into an issue when I want to run zpool24h...
+1
Guys, I want to deploy this on an AMD rig with 7 RX580's. Looks like the miners its using are only compatible with NVIDIA. Is there an alternative? Or is there a config I can implement to have it run on my AMD rig?
I've tried other miners with excavator, and its crashing after 10 minutes of running and dishes out all kinds of errors. So what's an alternate route if I cant get Nemos to work on this rig?
I've tried other miners with excavator, and its crashing after 10 minutes of running and dishes out all kinds of errors. So what's an alternate route if I cant get Nemos to work on this rig?
NemosMiner is NVIDIA only. You want MultiPoolMiner which can run AMD.
I'm conducting a multi week test using two rigs, 6x1070ti
83 hours in
MINER1 - ahashpool
MINER2 - ahashpool24hr
So far ahashpool24 is 2.3% more revenue. My guess is in the end both of these are going to be pretty darn close. Some weeks one might be a few % more, other weeks the other...
Also those looking to 'autoclose' ccminer if it hangs.
1]Start>Run>Regedit>OK
2]Now navigate to the following location:- HKEY_CURRENT_USER\Control Panel\ Desktop
Highlight Desktop,on the right pane of the Registry Editor you will find REG_SZ entry AutoEndTasks
3]Right click on it and select Modify. Change the value data to 1.The default value data is 0.Click OK and close the Registry Editor.
4]Navigate to [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Windows Error Reporting\]
5]Create a DWORD called DontShowUI and set the value to 1.
6]Restart the System.
83 hours in
MINER1 - ahashpool
MINER2 - ahashpool24hr
So far ahashpool24 is 2.3% more revenue. My guess is in the end both of these are going to be pretty darn close. Some weeks one might be a few % more, other weeks the other...
Also those looking to 'autoclose' ccminer if it hangs.
1]Start>Run>Regedit>OK
2]Now navigate to the following location:- HKEY_CURRENT_USER\Control Panel\ Desktop
Highlight Desktop,on the right pane of the Registry Editor you will find REG_SZ entry AutoEndTasks
3]Right click on it and select Modify. Change the value data to 1.The default value data is 0.Click OK and close the Registry Editor.
4]Navigate to [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Windows Error Reporting\]
5]Create a DWORD called DontShowUI and set the value to 1.
6]Restart the System.
In my windows 10 64 bit REG_SZ AutoEndTasks not exist !
Create it!
I'm conducting a multi week test using two rigs, 6x1070ti
83 hours in
MINER1 - ahashpool
MINER2 - ahashpool24hr
So far ahashpool24 is 2.3% more revenue. My guess is in the end both of these are going to be pretty darn close. Some weeks one might be a few % more, other weeks the other...
Also those looking to 'autoclose' ccminer if it hangs.
1]Start>Run>Regedit>OK
2]Now navigate to the following location:- HKEY_CURRENT_USER\Control Panel\ Desktop
Highlight Desktop,on the right pane of the Registry Editor you will find REG_SZ entry AutoEndTasks
3]Right click on it and select Modify. Change the value data to 1.The default value data is 0.Click OK and close the Registry Editor.
4]Navigate to [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Windows Error Reporting\]
5]Create a DWORD called DontShowUI and set the value to 1.
6]Restart the System.
83 hours in
MINER1 - ahashpool
MINER2 - ahashpool24hr
So far ahashpool24 is 2.3% more revenue. My guess is in the end both of these are going to be pretty darn close. Some weeks one might be a few % more, other weeks the other...
Also those looking to 'autoclose' ccminer if it hangs.
1]Start>Run>Regedit>OK
2]Now navigate to the following location:- HKEY_CURRENT_USER\Control Panel\ Desktop
Highlight Desktop,on the right pane of the Registry Editor you will find REG_SZ entry AutoEndTasks
3]Right click on it and select Modify. Change the value data to 1.The default value data is 0.Click OK and close the Registry Editor.
4]Navigate to [HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\Windows Error Reporting\]
5]Create a DWORD called DontShowUI and set the value to 1.
6]Restart the System.
In my windows 10 64 bit REG_SZ AutoEndTasks not exist !
112 hours ago I setup two identical miners to compare the standard profit switching to the 24hr profit switching. So far here is the outcome
MINER1 (ahashpool) = 0.01337059 BTC = $177.82 in 112 hours or $38.10/day avg
MINER2 (ahashpool24hr) = 0.01399279 BTC = $186.10 in 112 hours or $39.87/day avg
Rigs are running 6x1070ti, 85% power, +100GPU, +500MEM, NemosMiner 2.3
MINER1 (ahashpool) = 0.01337059 BTC = $177.82 in 112 hours or $38.10/day avg
MINER2 (ahashpool24hr) = 0.01399279 BTC = $186.10 in 112 hours or $39.87/day avg
Rigs are running 6x1070ti, 85% power, +100GPU, +500MEM, NemosMiner 2.3
Thanks for the data! Question what interval are you using? Any plans to test different intervals? BTW I have a similar rig and the average daily is similar to what I am seeing.
Cheers!
112 hours ago I setup two identical miners to compare the standard profit switching to the 24hr profit switching. So far here is the outcome
MINER1 (ahashpool) = 0.01337059 BTC = $180.31 in 112 hours or $38.64/day avg
MINER2 (ahashpool24hr) = 0.01399279 BTC = $188.70 in 112 hours or $40.43/day avg
Rigs are running 6x1070ti, 85% power, +100GPU, +500MEM, NemosMiner 2.3, 900 interval - Values calculated off $13,486/BTC
MINER1 (ahashpool) = 0.01337059 BTC = $180.31 in 112 hours or $38.64/day avg
MINER2 (ahashpool24hr) = 0.01399279 BTC = $188.70 in 112 hours or $40.43/day avg
Rigs are running 6x1070ti, 85% power, +100GPU, +500MEM, NemosMiner 2.3, 900 interval - Values calculated off $13,486/BTC
I'm running into an issue when I want to run zpool24h. Whenever nemosminer wants to update the pool data, it fails to update the data. When I run zpool I don't have this issue. I did notice that when I reduce the update interval from 600 sec, to 60 sec it has no issues and updates nicely.
Does anybody know a solution to this problem?
https://1drv.ms/i/s!Am4bHnQICtmKhGd9Sfw0pb4sNQ8j
Does anybody know a solution to this problem?
https://1drv.ms/i/s!Am4bHnQICtmKhGd9Sfw0pb4sNQ8j
Interestingly.... I have that problem on zpool not zpool24h
Also, I have that problem on zpool with all 5 of my rigs. I wonder if that's because there is a bug that makes the first pool you use to benchmark encounter that and then subsequent pools work fine? I'm assuming you started out with the 24hr pool unlike me?
Totally guessing here, I haven't tried to pin it down.
I'm running into an issue when I want to run zpool24h. Whenever nemosminer wants to update the pool data, it fails to update the data.
I have the same issue. I'm fine with just using zpool for now as the payout is probably roughly the same.
+1
I'm running into an issue when I want to run zpool24h. Whenever nemosminer wants to update the pool data, it fails to update the data. When I run zpool I don't have this issue. I did notice that when I reduce the update interval from 600 sec, to 60 sec it has no issues and updates nicely.
Does anybody know a solution to this problem?
https://1drv.ms/i/s!Am4bHnQICtmKhGd9Sfw0pb4sNQ8j
Does anybody know a solution to this problem?
https://1drv.ms/i/s!Am4bHnQICtmKhGd9Sfw0pb4sNQ8j
Quick question on X17. I am running on reduced intensity or my weaker card crashes (I have 1060+1030 I had lying around). I was running on 19 but increased to 20. Increasing it seems to have dropped my power usage on 1060 to only 60% (80 target) and it is using 20W fewer. Hashrate seems similar. Anyone have any ideas why a higher intensity gives lower power use?
Jump to: