Still the same error
TPruvotCuda9 - gpu 0,1,2 does not validate on CPU -
this is stressing because if I leave the pc unattended then I'd never know -if it's running or not.
How do I fix this guys?
I deleted that miner out of the miner folder- hopefully it won't kill profits.
Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 132. (Read 289447 times)
Hi, Im currently on 2.2.2, and my 1080ti is been running skein for hours, how can this be the most profitable coin to mine out of all the algos? i went from $8/day (real not estimated) to like $1.5/day of earnings cause of this bullshit of digibyte-skein thing being mined...should i just remove skein from the algo list? thanks
Hi, since I am new in this threat i maybe missed it somewhere, but with this you are mining the crypto worth most $ at the time of benchmark, but you are still going to have that crypto on selected pool as a reward right? Or it somehow automatically transfers to BTC?
Thanks.
Thanks.
Is there a Linux release for this tool?
All these type of autoswitching mining tools seem to be windows only.
All these type of autoswitching mining tools seem to be windows only.
Guys,
Ok so I change my btc address and start the "starthashrefinery.bat" - now it's only picking up on my 2 cards not all three.
I even changed inside from sel gpu to "0 1 2" and EWBF 0, 1, 2
What more do i need to do so it can pick up on my third card as well?
Ok so I change my btc address and start the "starthashrefinery.bat" - now it's only picking up on my 2 cards not all three.
I even changed inside from sel gpu to "0 1 2" and EWBF 0, 1, 2
What more do i need to do so it can pick up on my third card as well?
correctly it is necessary so: EWBF 0 1 2 (commas do not need to be put)
-SelGPUEWBF '0 1 2 3' -SelGPUCC '0,1,2,3'
Good luck
Guys,
Ok so I change my btc address and start the "starthashrefinery.bat" - now it's only picking up on my 2 cards not all three.
I even changed inside from sel gpu to "0 1 2" and EWBF 0, 1, 2
What more do i need to do so it can pick up on my third card as well?
Ok so I change my btc address and start the "starthashrefinery.bat" - now it's only picking up on my 2 cards not all three.
I even changed inside from sel gpu to "0 1 2" and EWBF 0, 1, 2
What more do i need to do so it can pick up on my third card as well?
I'm stuck with "Loading BTC rate from 'api.coinbase.com" Any workaround with this? I'm using miningpoolhub.
Error:
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..
NOTE: This happens when I put "EU" in location.
Error:
Loading BTC rate from 'api.coinbase.com'..
Loading pool stats..
Error contacting pool, retrying..
NOTE: This happens when I put "EU" in location.
Announcement: (2017-12-20 16:00 UTC) Bitcoin network is very very congested, we are aware of the recently payouts being still unconfirmed. This has happened many many times before, and it will get confirmed eventually. Please kindly be patient.
If they won't get confirmed, they might be cancelled.. No?
BTW, I really like ahashpool.
Btw, at the bottom of the site is their email for support> [email protected]
maybe try to ask there
Announcement: (2017-12-20 16:00 UTC) Bitcoin network is very very congested, we are aware of the recently payouts being still unconfirmed. This has happened many many times before, and it will get confirmed eventually. Please kindly be patient.
Thanks. That's funny how I missed their email there.
NemosMiner ver. 2.2.1 on one of my rigs stopped working on x17 algo twice in 15 mins. Just deleted algo from .bat, running ok again. Rig was running for like 3 days w/o any error prior to that, and nothing unusual in logs.
Btw, any1 knows how to contact ahashpool? Their payouts stuck (yesterday and today). They have like 2500+ miners and no support or thread anywhere.
Btw, any1 knows how to contact ahashpool? Their payouts stuck (yesterday and today). They have like 2500+ miners and no support or thread anywhere.
Yes, I have same problem, I have 0,01 in there, but still no payouts.
Will see tomorrow what will happen.
Btw, at the bottom of the site is their email for support> [email protected]
maybe try to ask there
Announcement: (2017-12-20 16:00 UTC) Bitcoin network is very very congested, we are aware of the recently payouts being still unconfirmed. This has happened many many times before, and it will get confirmed eventually. Please kindly be patient.
I've got the latest build running on MPH now for the following Algo's cryptonight,lyra2z,ethash,equihash,groestl,MyriadGroestl,Lyra2RE2,neoscrypt
Will post good/bad news in 6-12 hours!
Will post good/bad news in 6-12 hours!
NemosMiner-v2.3b-beta
zpool hashrefinery ahashpool miningpoolhub nicehash
tested with 6x 1060 & 6x 1080ti
Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Auto Downloads Miners
https://github.com/nemosminer/NemosMiner-v2.3/releases/download/NemosMiner-v2.3b-beta/NemosMiner-v2.3b-beta.zip
Removed: EWBF
Added: DSTM
Fixed: error popping up when switching/benchmarking
Added -workername option to .bat files
Best Regards
Nemo
zpool hashrefinery ahashpool miningpoolhub nicehash
tested with 6x 1060 & 6x 1080ti
Monitors mining pools in real-time in order to find the most profitable Algo / Auto Benchmarks Each algo to get optimal speeds / Fully automated / Auto Downloads Miners
https://github.com/nemosminer/NemosMiner-v2.3/releases/download/NemosMiner-v2.3b-beta/NemosMiner-v2.3b-beta.zip
Removed: EWBF
Added: DSTM
Fixed: error popping up when switching/benchmarking
Added -workername option to .bat files
Best Regards
Nemo
bug fixes: updated version here : https://github.com/nemosminer/NemosMiner-v2.3/archive/master.zip (this is v2.3b-beta without dstm)
im working on adding dstm now once complete and tested i will release v2.3b-beta later today with todays bugs fixes and dstm
Best Regards
Nemo
im working on adding dstm now once complete and tested i will release v2.3b-beta later today with todays bugs fixes and dstm
Best Regards
Nemo
Thanks for the good work.
Do you know if there is some problem when mining xevan algo with 2x card GDDR5x (1080Ti+1080GTX) + 1x card GDDR5 (1050Ti), with all these 3 cards ccminer.exe crashs, giving me an error, with only the GDDR5X cards it gives me no error, is there a workaround for this?
Tks
i haven't tested this with a 1050 ti if you disable it with -SelGPU... and just use the 1080 & 1080ti it will work, 1060 3gb is the lowest end card i have tested i have 2 6x1060 3gb rigs as test rigs... a 6x1070 rig 6x1070ti rig and 6x1080ti rig
1050ti and lower cards may/will require some intensities tweaks to get working correctly
Regards
Nemo
Yep, problem solved, just sold my 1050Ti and bought a 1070 itx in exchange
: )
NemosMiner ver. 2.2.1 on one of my rigs stopped working on x17 algo twice in 15 mins. Just deleted algo from .bat, running ok again. Rig was running for like 3 days w/o any error prior to that, and nothing unusual in logs.
Btw, any1 knows how to contact ahashpool? Their payouts stuck (yesterday and today). They have like 2500+ miners and no support or thread anywhere.
Btw, any1 knows how to contact ahashpool? Their payouts stuck (yesterday and today). They have like 2500+ miners and no support or thread anywhere.
Yes, I have same problem, I have 0,01 in there, but still no payouts.
Will see tomorrow what will happen.
Btw, at the bottom of the site is their email for support> [email protected]
maybe try to ask there
bug fixes: updated version here : https://github.com/nemosminer/NemosMiner-v2.3/archive/master.zip (this is v2.3b-beta without dstm)
im working on adding dstm now once complete and tested i will release v2.3b-beta later today with todays bugs fixes and dstm
Best Regards
Nemo
im working on adding dstm now once complete and tested i will release v2.3b-beta later today with todays bugs fixes and dstm
Best Regards
Nemo
Thanks for the good work.
Do you know if there is some problem when mining xevan algo with 2x card GDDR5x (1080Ti+1080GTX) + 1x card GDDR5 (1050Ti), with all these 3 cards ccminer.exe crashs, giving me an error, with only the GDDR5X cards it gives me no error, is there a workaround for this?
Tks
i haven't tested this with a 1050 ti if you disable it with -SelGPU... and just use the 1080 & 1080ti it will work, 1060 3gb is the lowest end card i have tested i have 2 6x1060 3gb rigs as test rigs... a 6x1070 rig 6x1070ti rig and 6x1080ti rig
1050ti and lower cards may/will require some intensities tweaks to get working correctly
Regards
Nemo
Yep, problem solved, just sold my 1050Ti and bought a 1070 itx in exchange
NemosMiner ver. 2.2.1 on one of my rigs stopped working on x17 algo twice in 15 mins. Just deleted algo from .bat, running ok again. Rig was running for like 3 days w/o any error prior to that, and nothing unusual in logs.
Btw, any1 knows how to contact ahashpool? Their payouts stuck (yesterday and today). They have like 2500+ miners and no support or thread anywhere.
Btw, any1 knows how to contact ahashpool? Their payouts stuck (yesterday and today). They have like 2500+ miners and no support or thread anywhere.
Guys, once in while I keep getting that "cannot validate on CPU" error.
Sometimes I wake up in the morning to see that it did that. Any way to fix that error?
TPVROT
I guess it means that your GPU got a wrong result which has been discarded after checking on the CPU. Might be related to your gpu being overclocked a bit too much.Sometimes I wake up in the morning to see that it did that. Any way to fix that error?
TPVROT
As usual, if you get these only rarely, it's fine. If it happens often, try to optimize your settings.
I'm running 2.3b on Win 7, 4x GTX 1070s. My .bat is effectively just hashrefinery between nist5 and neoscrypt. When it switches to neoscrypt, the mining window is launched behind powershell, and the cards are only using 30% power until it's brought into focus/to the front, at which point they use 100% power. This is quite annoying as anytime it switches into neoscrypt mining, I have to login via teamviewer and select the mining window.
The windows 10 computer with 1x GTX 1070 does not have this issue, though.
I'm also running xmr-stak, on both of these machines, if this matters.
Does anyone know of a fix?
The windows 10 computer with 1x GTX 1070 does not have this issue, though.
I'm also running xmr-stak, on both of these machines, if this matters.
Does anyone know of a fix?
Guys, once in while I keep getting that "cannot validate on CPU" error.
Sometimes I wake up in the morning to see that it did that. Any way to fix that error?
TPVROT
Sometimes I wake up in the morning to see that it did that. Any way to fix that error?
TPVROT
Hi Nemo,
Having an issue with 2.3 hashrate stats. Currently when I run the miner, whichever algo is chooses to run will end up multiplying it's hashrate so it effectively gets stuck on the first algo. When I run 2.3 on a 2 card 1070 ring it's fine. When I run it on 4 x 1070 rig it causes the issue. Vmem is 64gb.
Currently it says 23mh neoscrypt speed benchmarked. But only runs at 4mh. If I delete the neoscrypt hashrate file and re benchmark. It will show 4nh and then start going up showing unrealistic profit ($180 nzd when it should be about 25-30 nzd)
Help much appreciated.
Regards,
Dicacao
Having an issue with 2.3 hashrate stats. Currently when I run the miner, whichever algo is chooses to run will end up multiplying it's hashrate so it effectively gets stuck on the first algo. When I run 2.3 on a 2 card 1070 ring it's fine. When I run it on 4 x 1070 rig it causes the issue. Vmem is 64gb.
Currently it says 23mh neoscrypt speed benchmarked. But only runs at 4mh. If I delete the neoscrypt hashrate file and re benchmark. It will show 4nh and then start going up showing unrealistic profit ($180 nzd when it should be about 25-30 nzd)
Help much appreciated.
Regards,
Dicacao
Jump to: