Author

Topic: [NemosMiner] multi algo profit switching NVIDIA/CPU miner - page 180. (Read 289447 times)

full member
Activity: 349
Merit: 102
why don't you try it and find out, for yourself...  but yes most algo's like higher core clock rather than  mem

thanks. yes i get an improvement with core on skunk.

just wondered if there was a good general oc to cover most of the algos rather than having to experiment with every single one.

actually is there a way i can reset the benchmarks which get set on first run? then i could check the oc results for them all without having to edit the bat to one algo at a time.
sr. member
Activity: 308
Merit: 250
"cashen" for Nvidia Inspector you can just use these commands:

NVI_0_2_200_-1000_80_83_0      

that = (gpu device 0 / core + 200 / mem -1000 / powertarget 80% / temp 83)



Is it possible to use Inspector shortcut for multiple GPUs like this:
NVI_0_2_200_-1000_80_83_0  NVI_1_2_200_-1000_80_83_0  NVI_2_2_200_-1000_80_83_0
  
newbie
Activity: 17
Merit: 0
Nemo it would be really cool if you put the option to choose what gpu's we wanted to run with the miner, just like what can be done back on nemosminer v1 Smiley

it will be supported very soon.. sorry not implemented yet...  its on my "2 do list" 

atm 2.x.x  will use all gpu's by default

Regards
Nemo

No need to apologize, it's us who appreciate your efforts on making the miner scene a better place. I will gladly keep sharing some of my hash power with you.

Thanks a lot!
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
Nemo it would be really cool if you put the option to choose what gpu's we wanted to run with the miner, just like what can be done back on nemosminer v1 Smiley

it will be supported very soon.. sorry not implemented yet...  its on my "2 do list" 

atm 2.x.x  will use all gpu's by default

Regards
Nemo
newbie
Activity: 17
Merit: 0
Nemo it would be really cool if you put the option to choose what gpu's we wanted to run with the miner, just like what can be done back on nemosminer v1 Smiley
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
why don't you try it and find out, for yourself...  but yes most algo's like higher core clock rather than  mem
full member
Activity: 349
Merit: 102
"cashen" for Nvidia Inspector you can just use these commands:

NVI_0_2_200_-1000_80_83_0      

that = (gpu device 0 / core + 200 / mem -1000 / powertarget 80% / temp 83)

Im sorry. How to use these commands?
If the command needs to be written to a bat-file, please provide an example. Thank you.

download Nvidia Inspector:

http://www.guru3d.com/files-get/nvidia-inspector-download,4.html

click showOverclocking:
make your Over clock to suit you:
click apply current clocks and voltage
click create Clocks Shortcut (that will add the command to your desktop ready to run anytime you wish)

: )

Nemo

Is this a good overclock for all algos used by nemosminer – bump up core and underclock memory?
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
"cashen" for Nvidia Inspector you can just use these commands:

NVI_0_2_200_-1000_80_83_0      

that = (gpu device 0 / core + 200 / mem -1000 / powertarget 80% / temp 83)

Im sorry. How to use these commands?
If the command needs to be written to a bat-file, please provide an example. Thank you.

download Nvidia Inspector:

http://www.guru3d.com/files-get/nvidia-inspector-download,4.html

click showOverclocking:
make your Over clock to suit you:
click apply current clocks and voltage
click create Clocks Shortcut (that will add the command to your desktop ready to run anytime you wish)

: )

Nemo
newbie
Activity: 56
Merit: 0
"cashen" for Nvidia Inspector you can just use these commands:

NVI_0_2_200_-1000_80_83_0      

that = (gpu device 0 / core + 200 / mem -1000 / powertarget 80% / temp 83)

Im sorry. How to use these commands?
If the command needs to be written to a bat-file, please provide an example. Thank you.
member
Activity: 68
Merit: 10
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
I'm noticing a whole bunch of driver errors in my windows logs:

Quote
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

\Device\UVMLiteProcess1
Graphics Exception: ESR 0x51ca24=0x80000000 0x51ca28=0x0 0x51ca2c=0x0 0x51ca34=0x0

the message resource is present but the message is not found in the string/message table
what do you reckon?
ddu and install newer driver or any other problem?


same drivers as previous versions im just running the latest drivers on all my rigs... no issues's for me and my test rigs.. i got 1050ti's/1060's/1070's & 1080ti's all running great with 2.0.9.....
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
Hi Nemos aficionados,
can somebody give me a hint how to put rig name into  start.bat so it shows on zpool like this
ID=NemosMiner-v2.0.9,nameoftherig,c=BTC
Thanks.


edit:  NemosMiner-v2.0.9.ps1

find: WorkerName = "ID=NemosMiner-v2.0.9",

change it to want you want eg.  WorkerName = "ID=NemosMiner-v2.0.9/1050ti",

i'll add -WorkerName to start.bat in next update..

Regards
Nemo
newbie
Activity: 5
Merit: 0
Any 2x gtx1070 owners? What hashrate are you guys getting on skunk algorithm?
I'm getting around almost 50 on power 80, +100 gpu clock
member
Activity: 68
Merit: 10
How easy would it be adding the stats reporting to the pool option?
hero member
Activity: 1274
Merit: 556
I'm noticing a whole bunch of driver errors in my windows logs:

Quote
The description for Event ID 13 from source nvlddmkm cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

If the event originated on another computer, the display information had to be saved with the event.

The following information was included with the event:

\Device\UVMLiteProcess1
Graphics Exception: ESR 0x51ca24=0x80000000 0x51ca28=0x0 0x51ca2c=0x0 0x51ca34=0x0

the message resource is present but the message is not found in the string/message table
what do you reckon?
ddu and install newer driver or any other problem?
newbie
Activity: 23
Merit: 0
Would it be possible in the next release of nemos to have the option for everything to run in the system tray or in a background process?

I tried using the -B command in the powershell files, but all that does is prevent Nemos from closing ccminer when the app makes a switch to a new algo.

I have a 1080 Ti mining on a home office computer, but the distraction of algo-switching prevents me from using it while working
sr. member
Activity: 308
Merit: 250
Hi Nemos aficionados,
can somebody give me a hint how to put rig name into  start.bat so it shows on zpool like this
ID=NemosMiner-v2.0.9,nameoftherig,c=BTC
Thanks.
sr. member
Activity: 728
Merit: 256
NemosMiner-v3.8.1.3
Hello. I use Nemosminer and great respect for dev. But one thing - how I can set GPU device to mine in Nemosminer 2.x.x? In Nemosminer 1.7.6 I use -d option, but in 2.x.x this option isnt support

it will be supported very soon.. sorry not implemented yet...  its on my "2 do list"  

atm 2.x.x  will use all gpu's by default

Regards
Nemo  
newbie
Activity: 1
Merit: 0
Hello. I use Nemosminer and great respect for dev. But one thing - how I can set GPU device to mine in Nemosminer 2.x.x? In Nemosminer 1.7.6 I use -d option, but in 2.x.x this option isnt support
newbie
Activity: 26
Merit: 0
yeah it is an older model, nvidia770 but I've got it to mine skunk before. now its having a hard time mining the x17 algo which I've seen my card run as well...and now skein; although I've never tested that with other mining programs. but yeah all of the same errors. unsupported

this is the bat I used for mine skunk only on zpool and it worked.

ccminer-x64 --algo=skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq

now this is the line this miner uses and says my device isn't supported.

Bin\NVIDIA-skunk\ccminerskunk.exe -a skunk -o stratum+tcp://skunk.mine.zpool.ca:8433 -u 19L7Y7yf1kUW25JMrVSRWnJu9ZZhp5HGUq


try ccminer 1.7.6, or 1.8-dev for algos other than skunk which is only going to be in the newest miner apps since its a new algo;  If i stil had a 7 series, I would test all the copies I have collected over the years...  But for other algos, like X17, skein, etc... try wither of those 2 versions.

should be able to find links to them on github or cryptominingblog.

Yeah;  to test, just make a quick batch file that just launches the miner you are testing;  using a very basic batch such as this:

mineskein.bat
Code:
ccminer176.exe -a skein -o stratum+tcp://mine.zpool.ca:4933 -u BTCADDRESS -p c=BTC,skein
pause


be sure to replace the btcaddress with your BTC address.

Once you find a compatible one;  check with minerx on how to integrate it into the powershell scripts.  It may be as easy as just replacing the offending miner app itself, naming the new one just like the old one was....  but he will know best.   I haven't looked at his scripts much.

I know nemosminer right now is using SP_'s pay-for-use/private-build miner app....  the problem with it not working now could be that he switched from the tpruvot version recently... but i am unsure if he originally was serving out the tpruvot version for skunk.

*edit* check my bold highlight;  it should be '-a' as i've corrected it.  your post only had a '-'

Yeah I typoed that "-a" earlier. Good eye. I think the best solution would be to point the script to the new miners for the trouble coins but that's pretty far above me without some guidance on where to start. I have been just deleting the trouble algos out of the start.bat and not worrying about it. I hope to upgrade my card soon but this is all hobby stuff for me so no big deal. I appreciate the help from everyone so far!
Jump to: