Topic: [NEW] Bitmain Announces Antminer A3 - page 31. (Read 22431 times)
Can I run 2 A3's on a 10-30R 30A 125/250V outlet ?. We use this for dryers, but thought of using this to mine as this is the only 220v that I can find in my home ? However I understand this is old setup, will it work fine with continuous load. Thanks.
To those who are afraid their temperature is too high. My third chain is running up to 96 degrees since 48 hours, no issue on the hashrate so far.
Not quite sure if 100% compareable but in an old thread there was a discussion about the S9 and the feedback from people with deep knowledge about chiptemperature was that everything under 100°C is fine.
Not quite sure if 100% compareable but in an old thread there was a discussion about the S9 and the feedback from people with deep knowledge about chiptemperature was that everything under 100°C is fine.
Yea, and by next week you'll have a dead board. 96c for ASICs are WAY to high. Anything over 80-90c will seriously reduce the lifetime.
Also remember that bitmain has a temp diode on a SINGLE chip in that string. If that one chip is reporting 96c, you can definitely expect a variance of +/- 20c over all the chips. All it takes is one chip to overheat and blow the whole board/chain.
For anyone still trying to get NiceHash to work -- they will NOT be supporting the A3. Got this overnight.......
"Dear NiceHash user! Antminer A3 is not supported on NiceHash. Kind regards, NiceHash Team"
"Dear NiceHash user! Antminer A3 is not supported on NiceHash. Kind regards, NiceHash Team"
anyone know when batch 2 is gonna be available??
I have an A3 available for pickup. LET me know if you are interested. Can ship only in USA.
escrow?
You want to purchase?
Looks like board died in mine too ....... https://s9.postimg.org/7ammdd6a7/a3fault.png
anyone know when batch 2 is gonna be available??
I have an A3 available for pickup. LET me know if you are interested. Can ship only in USA.
escrow?
anyone know when batch 2 is gonna be available??
I have an A3 available for pickup. LET me know if you are interested. Can ship only in USA.
best pools for these things???
Is it possible to decrease core voltage on any other bitmain products?
Edit:
I manually set fan speed to 100% and the temps are hovering at around 60c now with 525mhz.
Im sure once blissz finished up work on his firmware we should be able to do that.Edit:
I manually set fan speed to 100% and the temps are hovering at around 60c now with 525mhz.
Also Ive tried 525, 569 and 575 and all yielded similar results. They are running better than at 600 but still hot and loud nevertheless. I shall consider running fan at 100% now, as no matter what I do I am not able to get temps to drop below 79
I think the problem here is the voltage the chips are running at. Even at 525mhz, woke up this morning to find one miner operating at 80C. It doesn't seem to make a difference on heat of what the freq is.
thanks what the best way to wake up those sleeping chips
Tssar mate, Im trying to PM you since 2 days but you are blocking newbies messages and Im listed as one
Is it possible to decrease core voltage on any other bitmain products?
Edit:
I manually set fan speed to 100% and the temps are hovering at around 60c now with 525mhz.
Edit:
I manually set fan speed to 100% and the temps are hovering at around 60c now with 525mhz.
To those who are afraid their temperature is too high. My third chain is running up to 96 degrees since 48 hours, no issue on the hashrate so far.
Not quite sure if 100% compareable but in an old thread there was a discussion about the S9 and the feedback from people with deep knowledge about chiptemperature was that everything under 100°C is fine.
Not quite sure if 100% compareable but in an old thread there was a discussion about the S9 and the feedback from people with deep knowledge about chiptemperature was that everything under 100°C is fine.
No... It will run fine up until a board gets burnt and you miner is worthless. Bitmains recommendations are to keep it under 80C so by having it at 100C it must be very loud and likely not going to last you more than 1-2 months vs 1 year.
To those who are afraid their temperature is too high. My third chain is running up to 96 degrees since 48 hours, no issue on the hashrate so far.
Not quite sure if 100% compareable but in an old thread there was a discussion about the S9 and the feedback from people with deep knowledge about chiptemperature was that everything under 100°C is fine.
Not quite sure if 100% compareable but in an old thread there was a discussion about the S9 and the feedback from people with deep knowledge about chiptemperature was that everything under 100°C is fine.
I think the problem here is the voltage the chips are running at. Even at 525mhz, woke up this morning to find one miner operating at 80C. It doesn't seem to make a difference on heat of what the freq is.
thanks what the best way to wake up those sleeping chips
I think the problem here is the voltage the chips are running at. Even at 525mhz, woke up this morning to find one miner operating at 80C. It doesn't seem to make a difference on heat of what the freq is.
For those having a dead hashboard we need to regroup and send a strong message to bitmain to have a quick support.
For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
Eh... won't they just send you to their warranty? Dead boards are really common with most anminers, S9s lately have been terrible.For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
S9 and L3 is a long term investment you have you ROI between 4 to 9 months because it is mining different crypto. In our case it is a short term investment. Most of us have lost 800$ because of dead hashboard next week we will have maybe 8$ per day who knows bottom line we are losing money instead of few days to recover it it will take months and ROI is even longer
I already got some people interested
U do realize that more manufacturers means more difficulty level right? And difficulty is too high already.
and?
For those having a dead hashboard we need to regroup and send a strong message to bitmain to have a quick support.
For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
Eh... won't they just send you to their warranty? Dead boards are really common with most anminers, S9s lately have been terrible.For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
S9 and L3 is a long term investment you have you ROI between 4 to 9 months because it is mining different crypto. In our case it is a short term investment. Most of us have lost 800$ because of dead hashboard next week we will have maybe 8$ per day who knows bottom line we are losing money instead of few days to recover it it will take months and ROI is even longer
I already got some people interested
U do realize that more manufacturers means more difficulty level right? And difficulty is too high already.
For those having a dead hashboard we need to regroup and send a strong message to bitmain to have a quick support.
For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
Eh... won't they just send you to their warranty? Dead boards are really common with most anminers, S9s lately have been terrible.For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
S9 and L3 is a long term investment you have you ROI between 4 to 9 months because it is mining different crypto. In our case it is a short term investment. Most of us have lost 800$ because of dead hashboard next week we will have maybe 8$ per day who knows bottom line we are losing money instead of few days to recover it it will take months and ROI is even longer
I already got some people interested
You can ask just to send back the defect hashboard for repairs. That way you can still mine with the working part. Unfortunately, in the ASIC mining space quality is not a key requirements, quick go to market is...
For those having a dead hashboard we need to regroup and send a strong message to bitmain to have a quick support.
For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
Eh... won't they just send you to their warranty? Dead boards are really common with most anminers, S9s lately have been terrible.For those interested by this approach. Please send me a PM and I will add you to my message.
At the end of the day we invest a lot of €€$$ and we are loosing money everyday and we all know it will be difficult to catch
S9 and L3 is a long term investment you have you ROI between 4 to 9 months because it is mining different crypto. In our case it is a short term investment. Most of us have lost 800$ because of dead hashboard next week we will have maybe 8$ per day who knows bottom line we are losing money instead of few days to recover it it will take months and ROI is even longer
Jump to: