Topic: New buildout with buysolar has entered stage 2. - page 3. (Read 4253 times)
Do it right, do it once?
You weren't kidding no messing around there. Between that and the size of the warehouse should be a pretty smooth summer. Is it set to a thermostat or just running constant?
I can't remember for sure I think I remember hearing s9's were like 200 CFM so if pushed to the max like 90 S9's.
I should probably know about the M10's, but I have been more concerned with using my heat not removing it. Summertime everything is a direct exhaust in the garage so no need for fans to be installed.
Looks like a beast, so that should vent 56 S9, how many M10 or better yet how many M20? The link is busted BTW.
I can't remember for sure I think I remember hearing s9's were like 200 CFM so if pushed to the max like 90 S9's.
I should probably know about the M10's, but I have been more concerned with using my heat not removing it. Summertime everything is a direct exhaust in the garage so no need for fans to be installed.
Looks like a beast, so that should vent 56 S9, how many M10 or better yet how many M20? The link is busted BTW.
The fan is installed it is a beast 
It moves 14000 cfm+
1hp motor 230 volts at 5.5 amps or about 1 s9
temps dropped 25f in 1 hour run time
https://www.gamut.com/p/direct-drive-exhaust-fan-heavy-duty-1-speeds-shutter-230v-ac-ODI0Mjg1
box was about 5 by 5 feet
fan is 45 inches by 45 inches
It moves 14000 cfm+
1hp motor 230 volts at 5.5 amps or about 1 s9
temps dropped 25f in 1 hour run time
https://www.gamut.com/p/direct-drive-exhaust-fan-heavy-duty-1-speeds-shutter-230v-ac-ODI0Mjg1
box was about 5 by 5 feet
fan is 45 inches by 45 inches
Really nice setup with the solar have you thought about liquid cooling the miners in novec or dielectric coolant?
https://www.engineeredfluids.com/coolfluids
Been looking at pulling the boards from my miners and sinking them into this stuff.
https://www.engineeredfluids.com/coolfluids
Been looking at pulling the boards from my miners and sinking them into this stuff.
well the new unpurchased location could be 2 mega watt build divide by 7 = 280kwatts 24/7/365
If that deal goes through we could consider it.
280 k-watts is about 90-110 m10s
around 3ph of hash.
Really nice setup with the solar have you thought about liquid cooling the miners in novec or dielectric coolant?
https://www.engineeredfluids.com/coolfluids
Been looking at pulling the boards from my miners and sinking them into this stuff.
https://www.engineeredfluids.com/coolfluids
Been looking at pulling the boards from my miners and sinking them into this stuff.
the m10 size and shape works well for us. we could fit 8 per rack shelf with 10 shelves 80 m10s
of course that is 80 x 2200 watts or 176 kwatts which we can not cool yet
we also do not have that much 'free' power from the solar array.
So we are
ordering an m10 today
the funds sent are
https://live.blockcypher.com/btc/address/3Dh9jM33EhUTbBYm8p4Mo9B6zZdXVPgNyp/
this will be 8th one
we will pull
the last s7ln and a pair of a721's trading 14th and 2200 watts for 31th and 2200 watts.
also more rack space as 3 miners and 2 psus will be removed for the 1 m10
we will be about 65 kwatts which is the goal.
So we have
1 m10 coming 2200 watts
1 t15 coming 1600 watts
1 s9 1200 watts
1 l3+ 700 watts
5700 watts to add
1 s7 ln off line 700 watts
2 a721's off line 1500 watts
2200 watts offline
this is a gain of 3500 watts also plus 62th - 14 th net gain of 48th btc and 500 mh ltc
pretty sure this caps us heat wise
as for power we are capped on the solar side
but we have way more available power if coins go up in price.
of course that is 80 x 2200 watts or 176 kwatts which we can not cool yet
we also do not have that much 'free' power from the solar array.
So we are
ordering an m10 today
the funds sent are
https://live.blockcypher.com/btc/address/3Dh9jM33EhUTbBYm8p4Mo9B6zZdXVPgNyp/
this will be 8th one
we will pull
the last s7ln and a pair of a721's trading 14th and 2200 watts for 31th and 2200 watts.
also more rack space as 3 miners and 2 psus will be removed for the 1 m10
we will be about 65 kwatts which is the goal.
So we have
1 m10 coming 2200 watts
1 t15 coming 1600 watts
1 s9 1200 watts
1 l3+ 700 watts
5700 watts to add
1 s7 ln off line 700 watts
2 a721's off line 1500 watts
2200 watts offline
this is a gain of 3500 watts also plus 62th - 14 th net gain of 48th btc and 500 mh ltc
pretty sure this caps us heat wise
as for power we are capped on the solar side
but we have way more available power if coins go up in price.
I looked at your setup how many m10's could fit if you were all m10?
I was going to go the route of more s9's buy them low price.
I think I am going to only order m10's they fit so much more hash power in the same space as an s9.
Maybe a t15 a t17 and a s17 for testing.
I also have heard of the L5 for LTC it does 1400mh for 1400 watts
It is a small improvement over the L3+ which 2 do 1000mh for 1400 watts
I think no more older gear.
I think I am going to only order m10's they fit so much more hash power in the same space as an s9.
Maybe a t15 a t17 and a s17 for testing.
I also have heard of the L5 for LTC it does 1400mh for 1400 watts
It is a small improvement over the L3+ which 2 do 1000mh for 1400 watts
I think no more older gear.
So you have
7 x 31 = 217 th m10's
1 s15 = 27th
1 t2turbo = 18th
1 a921 = 18th
a total 280th with 10 pieces of gear
The rest is s9's,A721's, s7Ln 260th with 24 pieces of gear.
what do you plan to add to the mix?
7 x 31 = 217 th m10's
1 s15 = 27th
1 t2turbo = 18th
1 a921 = 18th
a total 280th with 10 pieces of gear
The rest is s9's,A721's, s7Ln 260th with 24 pieces of gear.
what do you plan to add to the mix?
Solid troubleshooting. Send me a shopping list for the other builds if you want some pricing for networking, cables, shelving, etc.
Looks like we were close on projection till pango upped their pricing probably due to our exposure in telegram trying to get the warranty and parts order shipped together, correlates the visits we got from china on our time frame and their listing changes.
Best result is philip is hashing and shipping was saved with parts in reserve.
Looks like we were close on projection till pango upped their pricing probably due to our exposure in telegram trying to get the warranty and parts order shipped together, correlates the visits we got from china on our time frame and their listing changes.
Best result is philip is hashing and shipping was saved with parts in reserve.
I found the rma issue to be handled okay say an 8 of 10.
Tech help was good. I used teamviewer then purged it from the pc I had loaded it to.
Lucky it is a cheap part.
and mine farm buy helped with the other parts I ordered
this is the part
https://pangolinminer.com/product/miner-adapter-board-m10-m10s-d1/
Solid troubleshooting. Send me a shopping list for the other builds if you want some pricing for networking, cables, shelving, etc.
Looks like we were close on projection till pango upped their pricing probably due to our exposure in telegram trying to get the warranty and parts order shipped together, correlates the visits we got from china on our time frame and their listing changes.
Best result is philip is hashing and shipping was saved with parts in reserve.
Looks like we were close on projection till pango upped their pricing probably due to our exposure in telegram trying to get the warranty and parts order shipped together, correlates the visits we got from china on our time frame and their listing changes.
Best result is philip is hashing and shipping was saved with parts in reserve.
nice! very jealous phil!
Glad to hear you are at full hashrate, overall really quick service for the warranty parts. What would it have been 14 days total from the time you created the ticket to the time the replacement part arrived?
less maybe 11 days
Glad to hear you are at full hashrate, overall really quick service for the warranty parts. What would it have been 14 days total from the time you created the ticket to the time the replacement part arrived?
Yes drove up this morning put in the 3 slot bridge and boom here is the gear now
we are doing
546th sha 256 all gear
30.5th m10
the part replaced is in the blue rectangle the other parts were ordered to have on hand if needed
we are doing
546th sha 256 all gear
30.5th m10
the part replaced is in the blue rectangle the other parts were ordered to have on hand if needed
So Phil did you go to Clifton and repair the m10?
I think the "s17" might show Q2 if Bitmain really wants to make money. Hopefully they learned from their s11 release mistake.
It is an interesting set of problems for me.
We did this buildout.
we are certainly going to expand this location.
we are in talks for a much larger build in Warren County.
I do not want to fuck up and be too conservative.
but I do not want to fuck up and be too aggressive.
It looks to me that Clifton power will not exceed 238 volts and run in the 226 to 238 volts range.
So we can do all s15 or s17 here eventually.
The larger location may be all m10.
Tomorrow I am driving to Clifton,NJ with repair parts on the m10 I will see how this goes.
I think the "s17" might show Q2 if Bitmain really wants to make money. Hopefully they learned from their s11 release mistake.
At the moment I may do nothing at all and wait for the s17 to drop.
Jump to: