NiceHash Miner - easy-to-use best-profit multi-device cryptocurrency miner - page 2.

BSAlex

member

Activity: 239

Merit: 10

Quote from: Liquid71 on November 18, 2017, 08:24:51 PM

Nicehash or anyone else, does using CPU lower hashrate with Nvidia cards?

I have strange behaviour using NHML 1.8.1.5 Sometimes GPU hashrate drop two times (GTX 970 GPU) and keep for long time (say half an hour), then return for normal rate. I am trying to find what's causing the issue. Now I'll add CPU mining to checklist.

Liquid71

hero member

Activity: 835

Merit: 1000

There is NO Freedom without Privacy

Nicehash or anyone else, does using CPU lower hashrate with Nvidia cards?

When I use standalone miners I need to put the GPU miner on one thread, and the CPU XMR miner set to use the other threads otherwise the hashrate for the GPU miner suffers which is obviously the most profitable. The new Nicehash miner I seem to have less control, if I just run it telling it to use the CPU and GPU will it adjust making sure CPU doesn't slow the GPU miners?
If not how can I use Nicehash to mine with the GPU's and the CPU without lowering cuda miner hashrates?

sNaKeyz0r91

member

Activity: 131

Merit: 10

Quote from: aarons6 on November 17, 2017, 10:57:15 PM

can you guys code some delay when the NHML starts before it tries to go online and get the profit..
it seems every single time my rig restarts its stuck on an error message saying it cant find the profit data..

You have a option is settings which you have to uncheck so that miner does not verify profit data at start.
Good luck!

BSAlex

member

Activity: 239

Merit: 10

Quote from: BSAlex on November 10, 2017, 04:39:18 AM

Minor problem after upgrade to NHLM 1.8.1.5
Xmrig CPU miner lost about 10% of hash rate. In version 1.8.1.4 I have about 204 H/s for i7-3770K, after last upgrade less then 190 H/s
Xmr-Stak-CPU did not show any significant hashrate change showing stable 196 H/s
Anybody have similar effect?
Any suggestions to fix the issue?

Got good advice from miner author and fellow miner and fix speed, now getting 275 H/s for XMR-Stak-CPU after properly enabling huge memory pages. XMRig miner still show unstable performance in range from 170 to 274 H/s. I believe it's due to huge pages initialisation issues.

aarons6

legendary

Activity: 1736

Merit: 1006

can you guys code some delay when the NHML starts before it tries to go online and get the profit..
it seems every single time my rig restarts its stuck on an error message saying it cant find the profit data..

BSAlex

member

Activity: 239

Merit: 10

Minor problem after upgrade to NHLM 1.8.1.5
Xmrig CPU miner lost about 10% of hash rate. In version 1.8.1.4 I have about 204 H/s for i7-3770K, after last upgrade less then 190 H/s
Xmr-Stak-CPU did not show any significant hashrate change showing stable 196 H/s
Anybody have similar effect?
Any suggestions to fix the issue?

mohima1230

newbie

Activity: 26

Merit: 0

My gpu fans getting stop after random time when running nicehash miner. As well as automatic increase and decrease of fan speed. How can i solve the problem? I am currently using trixx to undervolt gpu and my gpus are modified bios.

BitcoinDiamond

newbie

Activity: 28

Merit: 0

Quote from: pologates on November 02, 2017, 03:14:40 AM

Hello, nice hash software is a very good soft despite all that I can hear.Fait you your own opinion.By cons it consumes much more electricity than claymore optimized .750w 6 cards (claymore) 1050 w 6 cards nicehash: ( have a nice day

1050/750 = 40% increase in power required.
If what you're saying is correct then unless you're hashrate has increased by 40% it is not worth the switch.

djeZo

hero member

Activity: 588

Merit: 520

Quote from: blackhorse7 on November 09, 2017, 03:14:38 AM

https://github.com/nicehash/NiceHashMinerLegacy/issues/555
Very interesting discovery

Code:

OK - I was surprised to see that NiceHashMiner queiries the registry about 60 THOUSAND times a minute! Some of the query types might be worrying - e.g. it has a mailto check, and it searches all the private certificate locations e.g. Root and CA.

Considering there is full NHM Legacy source available on GitHub, just point out which part of the code is malicious. Until then, I suggest you to study more about computer tech so you will be able to better understand what, when and why is needed for software to properly work.

blackhorse7

newbie

Activity: 43

Merit: 0

https://github.com/nicehash/NiceHashMinerLegacy/issues/555
Very interesting discovery

Code:

OK - I was surprised to see that NiceHashMiner queiries the registry about 60 THOUSAND times a minute! Some of the query types might be worrying - e.g. it has a mailto check, and it searches all the private certificate locations e.g. Root and CA.

SlavaKap

newbie

Activity: 17

Merit: 0

New miner for lyra2re - on cold card its faster in test. When mining going - hash is lower then prevous on 2 percent!

sundownz

hero member

Activity: 714

Merit: 512

Is there a way to reduce the CryptoNight difficulty with NH Legacy ?

xingqiaoyin

sr. member

Activity: 395

Merit: 250

how to get cryptonight working with nicehash ? i always get result rejected by the pool
mining with 12 nvidias on nvoc ?

Turkish88

full member

Activity: 714

Merit: 104

How i can run nicehash at VM with cpu xeon. Simple how saying in site, download latest version and start not workin he dont seen my cpu's

HKGolden

sr. member

Activity: 308

Merit: 250

Hello, can I use my IBELINK DM11G miner with NiceHash? Couldn't find what my profits would be on here since it's not listed: https://www.nicehash.com/profitability-calculator/

Any thoughts? Thanks!

Edit: Also how do I configure my miner with NiceHash? Any guides? I'm having a bit of a hard time.

pologates

newbie

Activity: 12

Merit: 0

Hello, nice hash software is a very good soft despite all that I can hear.Fait you your own opinion.By cons it consumes much more electricity than claymore optimized .750w 6 cards (claymore) 1050 w 6 cards nicehash: ( have a nice day

sindikat

full member

Activity: 364

Merit: 106

Quote from: ronnieb on October 16, 2017, 11:50:26 AM

any plans on integrating XMR STAK AMD into the nicehash legacy? We got some reports of people doing 1800Hs splitting two threads with Vega 56/64 on that program and thats pretty cool.

I actually don't like the software from nicehash. I don't know what it is connected but the RX 580 more coins mining on the old version than the new one. A lot of algorithms I have not started. I'm not good in settings but I tried everything. The program automatically chooses the worst. So I don't use updates.

xeminer

member

Activity: 97

Merit: 10

Code:

 cl  17:04:01|cl-4      No work. Pause for 3 s.
  ✘  17:04:01|stratum   Read response failed: Connection reset by peer
  ℹ  17:04:01|stratum   Reconnecting in 3 seconds...
 cl  17:04:04|cl-1      No work. Pause for 3 s.
 cl  17:04:04|cl-3      No work. Pause for 3 s.
 cl  17:04:04|cl-6      No work. Pause for 3 s.
 cl  17:04:04|cl-2      No work. Pause for 3 s.
 cl  17:04:04|cl-0      No work. Pause for 3 s.
 cl  17:04:04|cl-7      No work. Pause for 3 s.
 cl  17:04:04|cl-5      No work. Pause for 3 s.
 cl  17:04:04|cl-4      No work. Pause for 3 s.
  ℹ  17:04:04|stratum   Connecting to stratum server daggerhashimoto.usa.nicehash.com:3353
  ℹ  17:04:04|stratum   Connected to stratum server daggerhashimoto.usa.nicehash.com : 3353
  ✘  17:04:04|stratum   Read response failed: Connection reset by peer
  ℹ  17:04:04|stratum   Reconnecting in 3 seconds...
 cl  17:04:07|cl-1      No work. Pause for 3 s. cl  17:04:07|cl-3      No work. Pause for 3 s.

 cl  17:04:07|cl-6      No work. Pause for 3 s.
 cl  17:04:07|cl-2      No work. Pause for 3 s.
 cl  17:04:07|cl-7      No work. Pause for 3 s.
 cl  17:04:07|cl-4      No work. Pause for 3 s.
 cl  17:04:07|cl-0      No work. Pause for 3 s. cl  17:04:07|cl-5      No work. Pause for 3 s.

  ℹ  17:04:07|stratum   Connecting to stratum server daggerhashimoto.usa.nicehash.com:3353
  ℹ  17:04:07|stratum   Connected to stratum server daggerhashimoto.usa.nicehash.com : 3353
  ✘  17:04:07|stratum   Read response failed: End of file
  ℹ  17:04:07|stratum   Reconnecting in 3 seconds...

what happened ?. I can not connect on a new machine. But my previous machines still work normally.
I still can connect on ethpool and it works very normally. But when I try again with nicehash it does not work

ronnieb

jr. member

Activity: 199

Merit: 1

any plans on integrating XMR STAK AMD into the nicehash legacy? We got some reports of people doing 1800Hs splitting two threads with Vega 56/64 on that program and thats pretty cool.

Kronos21

sr. member

Activity: 434

Merit: 255

Quote from: Dante2007 on October 16, 2017, 10:51:07 AM

i have 4 GTX 1080 TI's and they are getting really hot over 80 - 88 Celsius running nicehash any tweaks to stabilized the temperature?

If your GPU will work in this mode, they will quickly overheat and fail. Nicehash nothing to do with. It will happen on any pool. To cope with this problem need to change the BIOS. There are already modernized under the model of your GPU and you can do it themselves. I recommend you the second option. You need to find a specialist from your country because the procedure will have a lot of technical terms and if English is not your native language you will have problems with understanding.

Topic: NiceHash Miner - easy-to-use best-profit multi-device cryptocurrency miner - page 2. (Read 170825 times)