guys if anyone can help here would really appreciate it iam trying to mine some ftc and spent hours to optimize my amd rx 580 and can get it to work the error iam having is
thread 0 is deisabled
ocl 0 failure disabling
i dont know what to do getting tired of it
my bat is like this
nsgminer -k neoscrypt -I 10 -d 0 -o pool u wallet addrss p x
i hope you could help thank you
Topic: NSGminer v0.9.4: The Fastest NeoScrypt GPU Miner - page 11. (Read 221775 times)
UFO is asking me a log file to understand why is the miner failing after few minutes
I tried to enable it but i do not see any log file created (altough the debug prinitng works):
nsgminer.exe --text-only --debug --debuglog --verbose
Do I have to specify an output log filename?
I tried to enable it but i do not see any log file created (altough the debug prinitng works):
nsgminer.exe --text-only --debug --debuglog --verbose
Do I have to specify an output log filename?
Trying to get SGMINER to run my RX580 cards only for Feathercoin. Using windows 10 and have 6 other NVidia cards mining another coin. Need help with config/bat files
can someone please help me config this miner batch file... I am new to this and can use some help...I am running windows 10 64bit with 6- 1070ti gpus...I got ccminer to work but i would really like to try nsg...thanks is andvance
Getting 600k-1000k on my RX 580, anyone getting their RX 580 to stay at 1000k? or closer to anyway.
the 600ish seems to be normal, getting 3,1 mh/s with 5x 580
Darn, ok, thanks.
Is this normal?
[00:30:35] Stratum from pool 0 requested work restart
[00:30:35] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:41] Accepted 5A9CACED96000000x0 Diff 27.139/12.000 OCL 0
[00:30:44] Stratum from pool 0 requested work restart
[00:30:44] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:46] Accepted 67E98E4849010000x0 Diff 12.439/12.000 OCL 0
[00:30:47] Accepted 5344953E0A010000x0 Diff 15.384/12.000 OCL 0
[00:30:48] Accepted FE5CF273BD000000x0 Diff 21.620/12.000 OCL 0
[00:30:51] Stratum from pool 0 requested work restart
[00:30:51] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:53] Accepted 65BF442121000000x0 Diff 123.634/12.000 OCL 0
Getting a lot of work restart's
Getting this on a Vega64.. although it is doing about1Mh 1.4Mh 
[00:30:35] Stratum from pool 0 requested work restart
[00:30:35] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:41] Accepted 5A9CACED96000000x0 Diff 27.139/12.000 OCL 0
[00:30:44] Stratum from pool 0 requested work restart
[00:30:44] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:46] Accepted 67E98E4849010000x0 Diff 12.439/12.000 OCL 0
[00:30:47] Accepted 5344953E0A010000x0 Diff 15.384/12.000 OCL 0
[00:30:48] Accepted FE5CF273BD000000x0 Diff 21.620/12.000 OCL 0
[00:30:51] Stratum from pool 0 requested work restart
[00:30:51] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:53] Accepted 65BF442121000000x0 Diff 123.634/12.000 OCL 0
Getting a lot of work restart's
Getting this on a Vega64.. although it is doing about
Are you kidding? What settings and drivers? I think you need to have vardiff (about 3-4 pages something similar is mentioned)
Hi guys,
How do I direct the miner to NiceHash?
My script is:
Thanks
How do I direct the miner to NiceHash?
My script is:
Code:
nsgminer -k neoscrypt --no-adl --gpu-platform 2 -g 1 -w 128 -I 16 -o stratum+tcp://neoscrypt.eu.nicehash.com:3341 -u MyBTCwallet
The miner returns: "No login credentials supplied for pool 0 stratum+tcp://neoscrypt.eu.nicehash.com:3341"Thanks
I'm glad no one answered my question as NiceHash has been hacked and all BTC stolen: https://www.reddit.com/r/NiceHash/comments/7i0s6o/official_press_release_statement_by_nicehash/?st=javj0xn9&sh=5a652c55
So I'm trying a 1080ti card with both NSGminer and CCminer, but found the following issue (no, the card is in perfect health and mines multiple other coins flawlessly, and games like a beast), and I realize the cuda miner is what I should be utilizing however needed to try it anyways to compare results.
NSG miner creates over 50% bad shares consistently.
CCminer creates 90% accepted shares at first then 10% bad shares all in a bunch, after that it creates 20+% bad shares intermittently.
Regardless of lower or higher clock/mem speeds and/or Power limit, adjusted -I and tested multiple different drivers cleanly installed, and in a pool closest to my location.
Also what Does "share is above target" actually mean. I'm thinking If I could find this out this will lead me to the source of the problem.
Any Ideas?
NSG miner creates over 50% bad shares consistently.
CCminer creates 90% accepted shares at first then 10% bad shares all in a bunch, after that it creates 20+% bad shares intermittently.
Regardless of lower or higher clock/mem speeds and/or Power limit, adjusted -I and tested multiple different drivers cleanly installed, and in a pool closest to my location.
Also what Does "share is above target" actually mean. I'm thinking If I could find this out this will lead me to the source of the problem.
Any Ideas?
There are many NeoScrypt CCminers with kernels patched by many people, so I honestly cannot tell you what's wrong with one or another. My one in the OP is for Maxwells only. Not patched for Pascals yet. To be absolutely correct, the patched version hasn't been uploded yet.
When a share is above target, it's rejected by the pool because considered invalid. Although it isn't necessarily true.
I noticed that sgminer is very cpu intensive, maybe your cpu is not stable enough?
BTW, could the cpu usage be reduced?
BTW, could the cpu usage be reduced?
NVIDIA defaults to software polling which burns CPU time. One CPU thread per one GPU thread. It can use interrupts instead. If you tell me an OpenCL equivalent to cudaSetDeviceFlags(DeviceScheduleBlockingSync), we have no problem.
I have tweeted the question to nvidia ^^
Getting 600k-1000k on my RX 580, anyone getting their RX 580 to stay at 1000k? or closer to anyway.
the 600ish seems to be normal, getting 3,1 mh/s with 5x 580
Getting 600k-1000k on my RX 580, anyone getting their RX 580 to stay at 1000k? or closer to anyway.
Hi guys,
How do I direct the miner to NiceHash?
My script is:
Thanks
How do I direct the miner to NiceHash?
My script is:
Code:
nsgminer -k neoscrypt --no-adl --gpu-platform 2 -g 1 -w 128 -I 16 -o stratum+tcp://neoscrypt.eu.nicehash.com:3341 -u MyBTCwallet
The miner returns: "No login credentials supplied for pool 0 stratum+tcp://neoscrypt.eu.nicehash.com:3341"Thanks
Is this normal?
[00:30:35] Stratum from pool 0 requested work restart
[00:30:35] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:41] Accepted 5A9CACED96000000x0 Diff 27.139/12.000 OCL 0
[00:30:44] Stratum from pool 0 requested work restart
[00:30:44] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:46] Accepted 67E98E4849010000x0 Diff 12.439/12.000 OCL 0
[00:30:47] Accepted 5344953E0A010000x0 Diff 15.384/12.000 OCL 0
[00:30:48] Accepted FE5CF273BD000000x0 Diff 21.620/12.000 OCL 0
[00:30:51] Stratum from pool 0 requested work restart
[00:30:51] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:53] Accepted 65BF442121000000x0 Diff 123.634/12.000 OCL 0
Getting a lot of work restart's
Getting this on a Vega64.. although it is doing about1Mh 1.4Mh
[00:30:35] Stratum from pool 0 requested work restart
[00:30:35] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:41] Accepted 5A9CACED96000000x0 Diff 27.139/12.000 OCL 0
[00:30:44] Stratum from pool 0 requested work restart
[00:30:44] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:46] Accepted 67E98E4849010000x0 Diff 12.439/12.000 OCL 0
[00:30:47] Accepted 5344953E0A010000x0 Diff 15.384/12.000 OCL 0
[00:30:48] Accepted FE5CF273BD000000x0 Diff 21.620/12.000 OCL 0
[00:30:51] Stratum from pool 0 requested work restart
[00:30:51] Pool 0 is sending mismatched block contents to us (0 is not 1-1)
[00:30:53] Accepted 65BF442121000000x0 Diff 123.634/12.000 OCL 0
Getting a lot of work restart's
Getting this on a Vega64.. although it is doing about
So I'm trying a 1080ti card with both NSGminer and CCminer, but found the following issue (no, the card is in perfect health and mines multiple other coins flawlessly, and games like a beast), and I realize the cuda miner is what I should be utilizing however needed to try it anyways to compare results.
NSG miner creates over 50% bad shares consistently.
CCminer creates 90% accepted shares at first then 10% bad shares all in a bunch, after that it creates 20+% bad shares intermittently.
Regardless of lower or higher clock/mem speeds and/or Power limit, adjusted -I and tested multiple different drivers cleanly installed, and in a pool closest to my location.
Also what Does "share is above target" actually mean. I'm thinking If I could find this out this will lead me to the source of the problem.
Any Ideas?
NSG miner creates over 50% bad shares consistently.
CCminer creates 90% accepted shares at first then 10% bad shares all in a bunch, after that it creates 20+% bad shares intermittently.
Regardless of lower or higher clock/mem speeds and/or Power limit, adjusted -I and tested multiple different drivers cleanly installed, and in a pool closest to my location.
Also what Does "share is above target" actually mean. I'm thinking If I could find this out this will lead me to the source of the problem.
Any Ideas?
There are many NeoScrypt CCminers with kernels patched by many people, so I honestly cannot tell you what's wrong with one or another. My one in the OP is for Maxwells only. Not patched for Pascals yet. To be absolutely correct, the patched version hasn't been uploded yet.
When a share is above target, it's rejected by the pool because considered invalid. Although it isn't necessarily true.
I noticed that sgminer is very cpu intensive, maybe your cpu is not stable enough?
BTW, could the cpu usage be reduced?
BTW, could the cpu usage be reduced?
NVIDIA defaults to software polling which burns CPU time. One CPU thread per one GPU thread. It can use interrupts instead. If you tell me an OpenCL equivalent to cudaSetDeviceFlags(DeviceScheduleBlockingSync), we have no problem.
NSGMiner not working with GPU on Linux.
I tries 4 more times - never working, even on CPU
I install Linux Kernel 4.13.2 final release but this not helped
I have 2x GTX1060
...
user@PC1 /media/user/F/Work/Mining/nsgminer-trezarcoin-cryptopia-neoscrypt $ sh _2_start_trezar_cryptopia_neoscrypt.sh
NeoScrypt CPUminer v2.4.3
Engines: INT SSE2 SSE2-4way (enabled: SSE2-4way)
I tries 4 more times - never working, even on CPU
I install Linux Kernel 4.13.2 final release but this not helped
I have 2x GTX1060
...
user@PC1 /media/user/F/Work/Mining/nsgminer-trezarcoin-cryptopia-neoscrypt $ sh _2_start_trezar_cryptopia_neoscrypt.sh
NeoScrypt CPUminer v2.4.3
Engines: INT SSE2 SSE2-4way (enabled: SSE2-4way)
How do you expect CPUminer to work on your GPUs?
I'm getting this on a GTX 1070 under Debian.
[07:30:42] Probing for an alive pool
[07:30:42] The network difficulty has been set to 8376950971
[07:30:42] Stratum from pool 0 detected new block
[07:30:43] Error -9999: Building Program (clBuildProgram)
[07:30:43] ptxas error : Entry function 'search' uses too much shared data (0x10040 bytes, 0xc000 max)
[07:30:43] Failed to init GPU thread 0, disabling device 0
[07:30:43] Restarting the GPU from the menu will not fix this.
[07:30:43] Try to restart the miner.
[07:30:42] Probing for an alive pool
[07:30:42] The network difficulty has been set to 8376950971
[07:30:42] Stratum from pool 0 detected new block
[07:30:43] Error -9999: Building Program (clBuildProgram)
[07:30:43] ptxas error : Entry function 'search' uses too much shared data (0x10040 bytes, 0xc000 max)
[07:30:43] Failed to init GPU thread 0, disabling device 0
[07:30:43] Restarting the GPU from the menu will not fix this.
[07:30:43] Try to restart the miner.
Don't use -w 256 even if the driver reports to the miner it's alright.
SUCCESS: Specified value was saved.
D:\Downloads\nsgminer-win64-0.9.2\nsgminer-win64-0.9.2>nsgminer.exe -neoscrypt -o stratum+tcp://stratum.tzcpool.xyz:3026 -u crypto88.tzc1 -p 1
[2017-09-26 18:55:23] OpenCL platform 0 vendor: Advanced Micro Devices, Inc.
[18:55:23] OpenCL platform 0 name: AMD Accelerated Parallel Processing
[18:55:23] OpenCL platform 0 version: OpenCL 2.0 AMD-APP (2442.12)
[18:55:23] Platform 0 devices: 1
[18:55:23] 0 gfx804
[18:55:23] 1 OpenCL GPU device detected
[18:55:23] GPU 0 Radeon RX 550 Series hardware monitoring enabled
[18:55:23] Failed to ADL_Overdrive5_ODPerformanceLevels_Get
[18:55:23] Unable to load the NVIDIA Management Library
D:\Downloads\nsgminer-win64-0.9.2\nsgminer-win64-0.9.2>pause
Press any key to continue . . .
anyone got a clue with this i am running a amd rx 550 it is saying can't load nvidia
It seems you got the same issue as me with the Intel GPU. I guess you are running windows too? It seems to work fine in Linux.
I noticed that sgminer is very cpu intensive, maybe your cpu is not stable enough?
BTW, could the cpu usage be reduced?
BTW, could the cpu usage be reduced?
So I'm trying a 1080ti card with both NSGminer and CCminer, but found the following issue (no, the card is in perfect health and mines multiple other coins flawlessly, and games like a beast), and I realize the cuda miner is what I should be utilizing however needed to try it anyways to compare results.
NSG miner creates over 50% bad shares consistently.
CCminer creates 90% accepted shares at first then 10% bad shares all in a bunch, after that it creates 20+% bad shares intermittently.
Regardless of lower or higher clock/mem speeds and/or Power limit, adjusted -I and tested multiple different drivers cleanly installed, and in a pool closest to my location.
Also what Does "share is above target" actually mean. I'm thinking If I could find this out this will lead me to the source of the problem.
Any Ideas?
NSG miner creates over 50% bad shares consistently.
CCminer creates 90% accepted shares at first then 10% bad shares all in a bunch, after that it creates 20+% bad shares intermittently.
Regardless of lower or higher clock/mem speeds and/or Power limit, adjusted -I and tested multiple different drivers cleanly installed, and in a pool closest to my location.
Also what Does "share is above target" actually mean. I'm thinking If I could find this out this will lead me to the source of the problem.
Any Ideas?
anyone?
I have 5 gtx1070, but i cannot found an option to only compute on 4 gpu (to let my fifth gpu free for gaming).
How can i so this?
I didn't see such option in the readme file.
How can i so this?
I didn't see such option in the readme file.
--device|-d
Thanks, this is working with -d 0 -d 1 -d 2 -d3
I was hopping that the parameter would work like other miners or like the intensity option that accepts coma (-d 0,1,2,3)
I have 5 gtx1070, but i cannot found an option to only compute on 4 gpu (to let my fifth gpu free for gaming).
How can i so this?
I didn't see such option in the readme file.
How can i so this?
I didn't see such option in the readme file.
--device|-d
I have 5 gtx1070, but i cannot found an option to only compute on 4 gpu (to let my fifth gpu free for gaming).
How can i so this?
I didn't see such option in the readme file.
How can i so this?
I didn't see such option in the readme file.
Jump to: