Guys, which is the best ATI driver for mining neoscrypt 14.4 , 14.6rc2 , 14.7rc3 , 15.7.1 , 15.12......
14.6 or 14.7 were the best in the past. I assume they still are, though the margin is thin.
Topic: NSGminer v0.9.4: The Fastest NeoScrypt GPU Miner - page 20. (Read 221777 times)
14.6 or 14.7 were the best in the past. I assume they still are, though the margin is thin.
Guys, which is the best ATI driver for mining neoscrypt 14.4 , 14.6rc2 , 14.7rc3 , 15.7.1 , 15.12......
What's the hashrate of 750ti's and 970 with this miner?Can anybody share settings and hashrates?
NSGMINER ON CUDA--
It has an interface like SGminer, but looking at GitHub, I think it is based on BFGminer. The hash rates are not read out in the same way as CCminer, for sure. I think I got 350KH/s max NeoScrypt hash on a GTX 960. However, I may not have beeen reading the rates properly. The numbers suggested at least 200KH/s, but I do not know what all of the readouts really mean on the HUD. --scryptr
What's the hashrate of 750ti's and 970 with this miner?Can anybody share settings and hashrates?
Need help pls,
I've been mining for 12hours straight perfectly but then I restarted PC and when I ran Miner again he showed my graphics adapters as 2x290 instead of 2x 390 and now openCL hangs...
Help
I've been mining for 12hours straight perfectly but then I restarted PC and when I ran Miner again he showed my graphics adapters as 2x290 instead of 2x 390 and now openCL hangs...
Help
seems pointless to mine the value is very low, around 30 satoshi, is that thign even profitable?
Those who dump as soon as they can, never get real profits.
When FTC was at 600 sats in January, many thought along the lines "whats FTC? $300k market cap? is it dead or alive? why do i bother to mine it?" The market capitalisation right now is $8 million.
this may be true, but not all coins are pumped with astronomical high %, right now feather coin is facing a p&d in the usual terms, it will retrurn soon under 10k, maybe not under 5k anymore
WALLET MINING PHOENIXCOIN--
Currently, I will hit a couple blocks a day while mining on the wallet alone. The power consumption is negligible, I have my 750ti cards mining poolside on FeatherCoin (FTC). They could be mining ETH at 4MH/s each (50% performance), perhaps.. I haven't run the numbers, but I have hit 2 more PXC blocks with just the wallet (7KH/s) since posting the above result. Mostly I satisfied my curiosity about how to solo-mine NeoScrypt coins. --scryptr
CPUminer with SSE2-4way delivers much more than the built in miner which is rather old.
AVX2 would be even better, Nicehash is offering 4 BTC to the one who make Neoscrypt minable with AVX2.
How much hashes i should expect in a single 7950 card?! And is it worth mining with that card?!
seems pointless to mine the value is very low, around 30 satoshi, is that thign even profitable?
Those who dump as soon as they can, never get real profits.
When FTC was at 600 sats in January, many thought along the lines "whats FTC? $300k market cap? is it dead or alive? why do i bother to mine it?" The market capitalisation right now is $8 million.
this may be true, but not all coins are pumped with astronomical high %, right now feather coin is facing a p&d in the usual terms, it will retrurn soon under 10k, maybe not under 5k anymore
WALLET MINING PHOENIXCOIN--
Currently, I will hit a couple blocks a day while mining on the wallet alone. The power consumption is negligible, I have my 750ti cards mining poolside on FeatherCoin (FTC). They could be mining ETH at 4MH/s each (50% performance), perhaps.. I haven't run the numbers, but I have hit 2 more PXC blocks with just the wallet (7KH/s) since posting the above result. Mostly I satisfied my curiosity about how to solo-mine NeoScrypt coins. --scryptr
i've looked at the spec of phoenix coin, and based on the block time/block reward, you can at best mine 25k coins per day. even if you were the only one mining
at 30 satoshi each this is 750k satoshi, which is very very low compared to other coins, yes you can mine to specualte, bu at present you need already that the price go 4x or 3x at the very least, to have the same profit of other coins
seems pointless to mine the value is very low, around 30 satoshi, is that thign even profitable?
Those who dump as soon as they can, never get real profits.
When FTC was at 600 sats in January, many thought along the lines "whats FTC? $300k market cap? is it dead or alive? why do i bother to mine it?" The market capitalisation right now is $8 million.
this may be true, but not all coins are pumped with astronomical high %, right now feather coin is facing a p&d in the usual terms, it will retrurn soon under 10k, maybe not under 5k anymore
WALLET MINING PHOENIXCOIN--
Currently, I will hit a couple blocks a day while mining on the wallet alone. The power consumption is negligible, I have my 750ti cards mining poolside on FeatherCoin (FTC). They could be mining ETH at 4MH/s each (50% performance), perhaps.. I haven't run the numbers, but I have hit 2 more PXC blocks with just the wallet (7KH/s) since posting the above result. Mostly I satisfied my curiosity about how to solo-mine NeoScrypt coins. --scryptr
CPUminer with SSE2-4way delivers much more than the built in miner which is rather old.
seems pointless to mine the value is very low, around 30 satoshi, is that thign even profitable?
Those who dump as soon as they can, never get real profits.
When FTC was at 600 sats in January, many thought along the lines "whats FTC? $300k market cap? is it dead or alive? why do i bother to mine it?" The market capitalisation right now is $8 million.
this may be true, but not all coins are pumped with astronomical high %, right now feather coin is facing a p&d in the usual terms, it will retrurn soon under 10k, maybe not under 5k anymore
WALLET MINING PHOENIXCOIN--
Currently, I will hit a couple blocks a day while mining on the wallet alone. The power consumption is negligible, I have my 750ti cards mining poolside on FeatherCoin (FTC). They could be mining ETH at 4MH/s each (50% performance), perhaps.. I haven't run the numbers, but I have hit 2 more PXC blocks with just the wallet (7KH/s) since posting the above result. Mostly I satisfied my curiosity about how to solo-mine NeoScrypt coins. --scryptr
seems pointless to mine the value is very low, around 30 satoshi, is that thign even profitable?
Those who dump as soon as they can, never get real profits.
When FTC was at 600 sats in January, many thought along the lines "whats FTC? $300k market cap? is it dead or alive? why do i bother to mine it?" The market capitalisation right now is $8 million.
this may be true, but not all coins are pumped with astronomical high %, right now feather coin is facing a p&d in the usual terms, it will retrurn soon under 10k, maybe not under 5k anymore
How is the power consumption on this compared to ETH ?
Higher.
How is the power consumption on this compared to ETH ?
seems pointless to mine the value is very low, around 30 satoshi, is that thign even profitable?
Those who dump as soon as they can, never get real profits.
When FTC was at 600 sats in January, many thought along the lines "whats FTC? $300k market cap? is it dead or alive? why do i bother to mine it?" The market capitalisation right now is $8 million.
seems pointless to mine the value is very low, around 30 satoshi, is that thing even profitable?
PHOENIXCOIN BLOCK REWARD SIZE HALVED TODAY--
Apparently, while experimenting with NSGminer and solo-mining PhoenixCoin (PXC), I caught the implementation of the block reward-halving at 1000K blocks. The block reward size is now 25 PXC. The following is a cap of my PXC wallet console:
Results from "getmininginfo" command at PXC wallet console.
I have been solo-mining PXC over the past several days, and have found 7 blocks total. Earlier, I found 2 50-coin blocks with CCminer at ~400KH/s, and 2 50-coin blocks with the wallet alone, at 7KH/s. This afternoon, I found 3 25-coin blocks while mining with NSGminer at about 350KH/s. Both CCminer and NSGminer used the same 2GB GTX 960. Here is a capture of my wallet:
Mined blocks before and after PhoenixCoin block-reward halving.
Solo-mining with NSGminer involves a tandem connection, as described by Ghostlander above this post. Here is the link:
https://bitcointalksearch.org/topic/m.14632863
--scryptr
Apparently, while experimenting with NSGminer and solo-mining PhoenixCoin (PXC), I caught the implementation of the block reward-halving at 1000K blocks. The block reward size is now 25 PXC. The following is a cap of my PXC wallet console:
Results from "getmininginfo" command at PXC wallet console.
I have been solo-mining PXC over the past several days, and have found 7 blocks total. Earlier, I found 2 50-coin blocks with CCminer at ~400KH/s, and 2 50-coin blocks with the wallet alone, at 7KH/s. This afternoon, I found 3 25-coin blocks while mining with NSGminer at about 350KH/s. Both CCminer and NSGminer used the same 2GB GTX 960. Here is a capture of my wallet:
Mined blocks before and after PhoenixCoin block-reward halving.
Solo-mining with NSGminer involves a tandem connection, as described by Ghostlander above this post. Here is the link:
https://bitcointalksearch.org/topic/m.14632863
--scryptr
why all the miners are not working in solo mode minus the 3.7.8 version of cgminer? i find this utterly stupid
Because no one cares to fix solo mining in SGminer. I don't maintain it.
there is a way to mine in solo feathercoin, with nvidia?
NSGminer supports all NVIDIA OpenCL capable hardware down to the oldest cards like 8800GTX. However the Maxwell generation runs better with CCminer.
SOLO-MINING PHOENIXCOIN--
I wrote a solo-mining tutorial for PhoenixCoin (PXC) in sp_ 's thread. Here is the link:
https://bitcointalksearch.org/topic/m.14619222
The mining was done with sp_ 's private CCminer #5. I was able to mine 50 PXC in less than 10 minutes. However, I was unable to communicate properly with a FeatherCoin wallet (v0.9.3.1).
I then began testing NSGminer, and have since been able to mine on a pool with my nVidia GTX 960. Could you suggest a launch-line for NSGminer to solo-mine PXC at 127.0.0.1? The rig is Win 7 x64 with a single 2GB GTX 960. Thank you for your work on the NSGminer. More miners should use it!
--scryptr
It's trivial pretty much. Put -o http://127.0.0.1:9554 -O rpcuser:rpcpassword and follow it with one or two Stratum pools and their user:password sets. Wallets don't support long polling, therefore you want these Stratum pools for block change notifications. CCminer can maintain one connection only, so it doesn't work very well for solo mining. Too many stales.
it seems that this is a problem related to the client, maybe the fact that they changed the algo in the wrong way? when they did the relaunch or something
There is no problem.
why all the miners are not working in solo mode minus the 3.7.8 version of cgminer? i find this utterly stupid
Because no one cares to fix solo mining in SGminer. I don't maintain it.
there is a way to mine in solo feathercoin, with nvidia?
NSGminer supports all NVIDIA OpenCL capable hardware down to the oldest cards like 8800GTX. However the Maxwell generation runs better with CCminer.
SOLO-MINING PHOENIXCOIN--
I wrote a solo-mining tutorial for PhoenixCoin (PXC) in sp_ 's thread. Here is the link:
https://bitcointalksearch.org/topic/m.14619222
The mining was done with sp_ 's private CCminer #5. I was able to mine 50 PXC in less than 10 minutes. However, I was unable to communicate properly with a FeatherCoin wallet (v0.9.3.1).
I then began testing NSGminer, and have since been able to mine on a pool with my nVidia GTX 960. Could you suggest a launch-line for NSGminer to solo-mine PXC at 127.0.0.1? The rig is Win 7 x64 with a single 2GB GTX 960. Thank you for your work on the NSGminer. More miners should use it!
--scryptr
It's trivial pretty much. Put -o http://127.0.0.1:9554 -O rpcuser:rpcpassword and follow it with one or two Stratum pools and their user:password sets. Wallets don't support long polling, therefore you want these Stratum pools for block change notifications. CCminer can maintain one connection only, so it doesn't work very well for solo mining. Too many stales.
it seems that this is a problem related to the client, maybe the fact that they changed the algo in the wrong way? when they did the relaunch or something
i tried right now but it say invalid out of bounds block target...ok it work now, but the hashrate is abysmally low, not worth it with nividia at all, doing 50kh/s with a 970....
why all the miners are not working in solo mode minus the 3.7.8 version of cgminer? i find this utterly stupid
Because no one cares to fix solo mining in SGminer. I don't maintain it.
there is a way to mine in solo feathercoin, with nvidia?
NSGminer supports all NVIDIA OpenCL capable hardware down to the oldest cards like 8800GTX. However the Maxwell generation runs better with CCminer.
SOLO-MINING PHOENIXCOIN--
I wrote a solo-mining tutorial for PhoenixCoin (PXC) in sp_ 's thread. Here is the link:
https://bitcointalksearch.org/topic/m.14619222
The mining was done with sp_ 's private CCminer #5. I was able to mine 50 PXC in less than 10 minutes. However, I was unable to communicate properly with a FeatherCoin wallet (v0.9.3.1).
I then began testing NSGminer, and have since been able to mine on a pool with my nVidia GTX 960. Could you suggest a launch-line for NSGminer to solo-mine PXC at 127.0.0.1? The rig is Win 7 x64 with a single 2GB GTX 960. Thank you for your work on the NSGminer. More miners should use it!
--scryptr
It's trivial pretty much. Put -o http://127.0.0.1:9554 -O rpcuser:rpcpassword and follow it with one or two Stratum pools and their user:password sets. Wallets don't support long polling, therefore you want these Stratum pools for block change notifications. CCminer can maintain one connection only, so it doesn't work very well for solo mining. Too many stales.
why all the miners are not working in solo mode minus the 3.7.8 version of cgminer? i find this utterly stupid
Because no one cares to fix solo mining in SGminer. I don't maintain it.
there is a way to mine in solo feathercoin, with nvidia?
NSGminer supports all NVIDIA OpenCL capable hardware down to the oldest cards like 8800GTX. However the Maxwell generation runs better with CCminer.
SOLO-MINING PHOENIXCOIN--
I wrote a solo-mining tutorial for PhoenixCoin (PXC) in sp_ 's thread. Here is the link:
https://bitcointalksearch.org/topic/m.14619222
The mining was done with sp_ 's private CCminer #5. I was able to mine 50 PXC in less than 10 minutes. However, I was unable to communicate properly with a FeatherCoin wallet (v0.9.3.1).
I then began testing NSGminer, and have since been able to mine on a pool with my nVidia GTX 960. Could you suggest a launch-line for NSGminer to solo-mine PXC at 127.0.0.1? The rig is Win 7 x64 with a single 2GB GTX 960. Thank you for your work on the NSGminer. More miners should use it!
--scryptr
Jump to: