Author

Topic: Off-Topic - page 253. (Read 384417 times)

full member
Activity: 224
Merit: 100
June 07, 2013, 01:08:00 PM
Those are not pictures but renders, e.g. Vapourware product. I can make some in few hours myself.


Completely aware of this, go back and read the thread... you own licensed CAD???  Go spam some other thread

Butthurt TerraHash shill, I see.

Not sure what you are doing in this thread. Scam accusations against a company that are still to even take orders? Seems you have WAY too much time on your hands. Maybe get a hobby?
full member
Activity: 490
Merit: 101
FRX: Ferocious Alpha
June 07, 2013, 12:37:09 PM
First post outside of the newbie forums finally!

I've been watching you guys and want to send some cheers your way!! I had to wait for my account to get past the newbie limits (4 hours and 5 posts in the newbie forum).

I've got my bitcoins ready for purchase with you guys. Only 1 question though, how much for shipping to Canada? Toronto specifically?

Hello yet another TerraHash shill, wsup?


Those are not pictures but renders, e.g. Vapourware product. I can make some in few hours myself.


Completely aware of this, go back and read the thread... you own licensed CAD???  Go spam some other thread
full member
Activity: 490
Merit: 101
FRX: Ferocious Alpha
June 07, 2013, 08:24:24 AM
First post outside of the newbie forums finally!

I've been watching you guys and want to send some cheers your way!! I had to wait for my account to get past the newbie limits (4 hours and 5 posts in the newbie forum).

I've got my bitcoins ready for purchase with you guys. Only 1 question though, how much for shipping to Canada? Toronto specifically?


You would be better off registering an account on their website and asking there. Terrahash is sporadic in maintaining this thread.

That's not a dig, They just are busy.

Thats why I am trying to assist in keeping the others updated.

New post on their site http://terrahash.com/more-pictures-of-the-case-without-the-boards/
newbie
Activity: 46
Merit: 0
June 06, 2013, 10:21:25 PM
First post outside of the newbie forums finally!

I've been watching you guys and want to send some cheers your way!! I had to wait for my account to get past the newbie limits (4 hours and 5 posts in the newbie forum).

I've got my bitcoins ready for purchase with you guys. Only 1 question though, how much for shipping to Canada? Toronto specifically?


You would be better off registering an account on their website and asking there. Terrahash is sporadic in maintaining this thread.

That's not a dig, They just are busy.

Understood, I already sent an email yesterday... waiting on a reply.. Just thought I'll send out some good vibes Smiley
legendary
Activity: 1372
Merit: 1022
Anarchy is not chaos.
June 06, 2013, 10:14:01 PM
First post outside of the newbie forums finally!

I've been watching you guys and want to send some cheers your way!! I had to wait for my account to get past the newbie limits (4 hours and 5 posts in the newbie forum).

I've got my bitcoins ready for purchase with you guys. Only 1 question though, how much for shipping to Canada? Toronto specifically?


You would be better off registering an account on their website and asking there. Terrahash is sporadic in maintaining this thread.

That's not a dig, They just are busy.
newbie
Activity: 46
Merit: 0
June 06, 2013, 10:08:20 PM
First post outside of the newbie forums finally!

I've been watching you guys and want to send some cheers your way!! I had to wait for my account to get past the newbie limits (4 hours and 5 posts in the newbie forum).

I've got my bitcoins ready for purchase with you guys. Only 1 question though, how much for shipping to Canada? Toronto specifically?
legendary
Activity: 1372
Merit: 1022
Anarchy is not chaos.
June 06, 2013, 09:40:52 PM
actually been following it the whole time. I will not be preordering anything. I simply cannot afford the risk. Whoever demonstrates working product AND shipping gets my custom. However, I don't think they're scamming, and even PG has conceded that maybe they aren't the scum of the earth. And that boy would question free gold. Not that that is all bad, skeptics are helpful in many ways.

But, if they start taking pre-orders now and you wait till they show a product, you will be way behind in the pre-orders. And by the time you get your machine, difficulty will be really high! So I think if you want some reward, you have to take some risk.

True. But their business model is that once they start shipping, they aren't doing "batches", they're doing continuous production, so I won't be that far behind. I'm not trying to get rich on this one hit. Not that I would mind, but I'm trying to build several businesses long term. I'm tired of working for other people. They get the rewards, I get poorer and poorer. This is something that to me is part of a strategy, not just a quick hit. As it currently stands, I'm not comfortable with the level of risk. By august, when/if they have working prototypes (either one of these bad boys) I'll have more confidence. I cannot afford to go all in on one possibility right now, but spreading the risk involves waiting.

I'm not a patient man, but between being a father and just starting to get old, I've learned to fake it very well  Cool
newbie
Activity: 18
Merit: 0
June 06, 2013, 08:06:37 PM
I am really looking foward to see a real product. Do you guys by any chance have the ability for us to pick up once the products come out? You guys seem to be one of the few companies that are legitimate. Cheesy
member
Activity: 75
Merit: 10
June 06, 2013, 07:12:30 PM
actually been following it the whole time. I will not be preordering anything. I simply cannot afford the risk. Whoever demonstrates working product AND shipping gets my custom. However, I don't think they're scamming, and even PG has conceded that maybe they aren't the scum of the earth. And that boy would question free gold. Not that that is all bad, skeptics are helpful in many ways.

But, if they start taking pre-orders now and you wait till they show a product, you will be way behind in the pre-orders. And by the time you get your machine, difficulty will be really high! So I think if you want some reward, you have to take some risk.
legendary
Activity: 1372
Merit: 1022
Anarchy is not chaos.
June 06, 2013, 04:33:52 PM
An actual CG render that clearly came from real CAD software? I demand a crappy looking Photoshop like everyone else has  Wink

Looks great TerraHash keep it up

Yeah it is nice to see, this is definitely a first of sorts LOL

I am almost ready to put my full weight and self approval on this project, just a few outstanding questions I wish could be answered.  Sad

Namely - Avalon order date and confirmation, facility confirmation from an outside source - if I could check these off the list, I would pre-order in a second.

I optimistically hope still, out of KNC, TH, Bitfury and even BFL, TH will be the winner.

I give it 50/50 at this point who delivers first between TH and KNC. I think both are likely legit.

Go read the entire KnCMiner thread and re-evaluate...they are scammy and untruthful, as PG has been pointing out with some fury. There are holes all over, and all they have show is an FPGA board that they have since abandoned as they came to the table entirely late with it as ASICs come online.

Don't give any of these companies your money until they actually show they have something real. Otherwise you deserve what you get for your ignorance.

actually been following it the whole time. I will not be preordering anything. I simply cannot afford the risk. Whoever demonstrates working product AND shipping gets my custom. However, I don't think they're scamming, and even PG has conceded that maybe they aren't the scum of the earth. And that boy would question free gold. Not that that is all bad, skeptics are helpful in many ways.
hero member
Activity: 798
Merit: 1000
www.DonateMedia.org
June 06, 2013, 03:19:52 PM
An actual CG render that clearly came from real CAD software? I demand a crappy looking Photoshop like everyone else has  Wink

Looks great TerraHash keep it up

Yeah it is nice to see, this is definitely a first of sorts LOL

I am almost ready to put my full weight and self approval on this project, just a few outstanding questions I wish could be answered.  Sad

Namely - Avalon order date and confirmation, facility confirmation from an outside source - if I could check these off the list, I would pre-order in a second.

I optimistically hope still, out of KNC, TH, Bitfury and even BFL, TH will be the winner.

I give it 50/50 at this point who delivers first between TH and KNC. I think both are likely legit.

Go read the entire KnCMiner thread and re-evaluate...they are scammy and untruthful, as PG has been pointing out with some fury. There are holes all over, and all they have show is an FPGA board that they have since abandoned as they came to the table entirely late with it as ASICs come online.

Don't give any of these companies your money until they actually show they have something real. Otherwise you deserve what you get for your ignorance.

I was more or less comparing the pre-order montra to the other companies that took pre-orders.  At this state in the game, not many would pay for something that hasnt been produced.

I disagree, so many scams are only appearing because there are enough gullible fools out there that send them money without thinking to support it. Hopefully this is changing, I have my own effort going to help this problem.

There is nothing wrong with pre-orders in a legitimate community startup as long as it is funding mass production after the product has been shown and demonstrated, ideally by unaffiliated 3rd parties. Anything other than this is a fraudulent undertaking.

TerraHash seems to be on the level with this, and is a reasonable explanation that Avalon chips still inbound, Avalon itself can acknowledge this as they have actual products they sell. Letting Avalon fill the void for chips instead of designing their own is a smart thing to do and cuts way down on development time and cost. Seeing a real CAD/CAM design is encouraging.
hero member
Activity: 742
Merit: 500
June 06, 2013, 02:10:38 PM
I like the case design, but am a bit concerned about airflow and temperatures since the hashing modules are so close together.

I hope it doesn't take a turbo fan pointed at that case with the top off to keep temps down!  Smiley
full member
Activity: 490
Merit: 101
FRX: Ferocious Alpha
June 06, 2013, 02:00:50 PM
An actual CG render that clearly came from real CAD software? I demand a crappy looking Photoshop like everyone else has  Wink

Looks great TerraHash keep it up

Yeah it is nice to see, this is definitely a first of sorts LOL

I am almost ready to put my full weight and self approval on this project, just a few outstanding questions I wish could be answered.  Sad

Namely - Avalon order date and confirmation, facility confirmation from an outside source - if I could check these off the list, I would pre-order in a second.

I optimistically hope still, out of KNC, TH, Bitfury and even BFL, TH will be the winner.

I give it 50/50 at this point who delivers first between TH and KNC. I think both are likely legit.

Go read the entire KnCMiner thread and re-evaluate...they are scammy and untruthful, as PG has been pointing out with some fury. There are holes all over, and all they have show is an FPGA board that they have since abandoned as they came to the table entirely late with it as ASICs come online.

Don't give any of these companies your money until they actually show they have something real. Otherwise you deserve what you get for your ignorance.

I was more or less comparing the pre-order montra to the other companies that took pre-orders.  At this state in the game, not many would pay for something that hasnt been produced.
newbie
Activity: 41
Merit: 0
June 06, 2013, 01:40:24 PM
Nice design for the DX there, TerraHash.  Wink

Some opinion on the DX design; I think instead of putting a large 'DX' in front, please make it smaller and put your company logo above it. It'll look more commercial and professional  Smiley
Twh
newbie
Activity: 41
Merit: 0
June 06, 2013, 01:28:39 PM
I give it 50/50 at this point who delivers first between TH and KNC. I think both are likely legit.
Terrahash isn't developing their own miner though, they're just providing boards and case+PSU combos for Avalon chips. If they deliver later than KnC for any other reason than BitSyncom not delivering the chips on time, that's a huge failure on their part; not that I expect them to be slower, since, again, they're just putting chips on boards.
hero member
Activity: 798
Merit: 1000
www.DonateMedia.org
June 06, 2013, 01:17:12 PM
An actual CG render that clearly came from real CAD software? I demand a crappy looking Photoshop like everyone else has  Wink

Looks great TerraHash keep it up

Yeah it is nice to see, this is definitely a first of sorts LOL

I am almost ready to put my full weight and self approval on this project, just a few outstanding questions I wish could be answered.  Sad

Namely - Avalon order date and confirmation, facility confirmation from an outside source - if I could check these off the list, I would pre-order in a second.

I optimistically hope still, out of KNC, TH, Bitfury and even BFL, TH will be the winner.

I give it 50/50 at this point who delivers first between TH and KNC. I think both are likely legit.

Go read the entire KnCMiner thread and re-evaluate...they are scammy and untruthful, as PG has been pointing out with some fury. There are holes all over, and all they have show is an FPGA board that they have since abandoned as they came to the table entirely late with it as ASICs come online.

Don't give any of these companies your money until they actually show they have something real. Otherwise you deserve what you get for your ignorance.
legendary
Activity: 1372
Merit: 1022
Anarchy is not chaos.
June 06, 2013, 01:04:18 PM
An actual CG render that clearly came from real CAD software? I demand a crappy looking Photoshop like everyone else has  Wink

Looks great TerraHash keep it up

Yeah it is nice to see, this is definitely a first of sorts LOL

I am almost ready to put my full weight and self approval on this project, just a few outstanding questions I wish could be answered.  Sad

Namely - Avalon order date and confirmation, facility confirmation from an outside source - if I could check these off the list, I would pre-order in a second.

I optimistically hope still, out of KNC, TH, Bitfury and even BFL, TH will be the winner.

I give it 50/50 at this point who delivers first between TH and KNC. I think both are likely legit.
full member
Activity: 490
Merit: 101
FRX: Ferocious Alpha
June 06, 2013, 11:36:57 AM
An actual CG render that clearly came from real CAD software? I demand a crappy looking Photoshop like everyone else has  Wink

Looks great TerraHash keep it up

Yeah it is nice to see, this is definitely a first of sorts LOL

I am almost ready to put my full weight and self approval on this project, just a few outstanding questions I wish could be answered.  Sad

Namely - Avalon order date and confirmation, facility confirmation from an outside source - if I could check these off the list, I would pre-order in a second.

I optimistically hope still, out of KNC, TH, Bitfury and even BFL, TH will be the winner.
hero member
Activity: 798
Merit: 1000
www.DonateMedia.org
June 06, 2013, 11:29:22 AM
An actual CG render that clearly came from real CAD software? I demand a crappy looking Photoshop like everyone else has  Wink

Looks great TerraHash keep it up
full member
Activity: 490
Merit: 101
FRX: Ferocious Alpha
June 06, 2013, 11:19:00 AM
How long do you think it'll be until you get your chips in? I'm buying the K64 module from you guys for sure.

Our first batch was one of the first few orders (we believe one of the first 20 orders). So we will be one of the first to get the chips. Hopefully by early to mid june.

I was going through trying to answer one of my own questions regarding the ordering of the avalon chips.  I did miss this post, but was hoping to find some confirmation on the statement above.
Jump to: