Topic: Official ASICMINER Block Erupter Europe - page 6. (Read 109555 times)
yeah, same here.)
Waiting new prices for Blades. 
All hubs are sold.
Hope to get more soon
Hope to get more soon
I hope no one minds this post
but i am now selling a limited stock of overclocking kits (up to 14.7gh/s) for the new version blades shipping from the UK
see here
https://bitcointalksearch.org/topic/new-version-unoverclockable-asicminer-blade-overclock-kit-from-the-uk-322161
for more information see here
https://bitcointalksearch.org/topic/m.3343981
Instructions on applying the kit
http://www.gekkoscience.com/be_ins/blade_ins.html
but i am now selling a limited stock of overclocking kits (up to 14.7gh/s) for the new version blades shipping from the UK
see here
https://bitcointalksearch.org/topic/new-version-unoverclockable-asicminer-blade-overclock-kit-from-the-uk-322161
for more information see here
https://bitcointalksearch.org/topic/m.3343981
Instructions on applying the kit
http://www.gekkoscience.com/be_ins/blade_ins.html
see it as a cool "power on mod" for your blade PSU 
Hashing power instead of a paper clip.
My old psu crashes out if I only draw on the 12v rail, the fan controller appears to only look at the 5v rail.(old but unused 450w)
Is an ATX power with at least 25 A from 5 V pins required to use the USB HUB at full capacity of 49 erupters?
Hi Olie,
510mA * 49 = 24990 / 1000 = 24,99 Amp
So it should be enough... 25 Amp is an ATX supply.... Hum.. about 500W ATX psu will be more than enough ( I think it has about 42A on the 5V Rail).
best regards,
P.
the 500W is typical for the 12V rail, you have to check the datasheet to be sure
Yea, suppose that's a bonus then, 5v rail for usb's, 12v for blades. Less PSU's to blow up 
see it as a cool "power on mod" for your blade PSU
Sounds like an opportunity to abuse the 12v line was missed on these hubs 
.
. Is an ATX power with at least 25 A from 5 V pins required to use the USB HUB at full capacity of 49 erupters?
Hi Olie,
510mA * 49 = 24990 / 1000 = 24,99 Amp
So it should be enough... 25 Amp is an ATX supply.... Hum.. about 500W ATX psu will be more than enough ( I think it has about 42A on the 5V Rail).
best regards,
P.
Is an ATX power with at least 25 A from 5 V pins required to use the USB HUB at full capacity of 49 erupters?
yes
Is an ATX power with at least 25 A from 5 V pins required to use the USB HUB at full capacity of 49 erupters?
asap when I find the time to check them.
By law and ToS we have 30 days time
You checkt them or you need more time? Only 8 Days are left by your ToS. I would be happy to see my BTC again...By law and ToS we have 30 days time
Thank you
Mastah
That 49 usb hub looks so cool!
Damn, should have waited a week 
49 port USB HUBs in stock! Unfortunately, only a very limited number 
I have not received any info when I get more.
Therefore, only one hub per order (at least 50 miners USB) for free, while supplies last and I like you
I have not received any info when I get more.
Therefore, only one hub per order (at least 50 miners USB) for free, while supplies last and I like you
@simpic
Will answer outstanding mail tonight/tomorrow
If it is the order I have in mind it seems that your local mail provider has lost the parcel
We will ship again
Solved! Item finally received.Will answer outstanding mail tonight/tomorrow
If it is the order I have in mind it seems that your local mail provider has lost the parcel
We will ship again
Thank you anyway
Keep up the good work
thx, looked into it few minutes after it was delivered, thats why I don't have answered again.
Use stratum proxy !!!
Yes, i did it yesterday and it worked Sorry.
Why it's needed? What does it change?
@2GOOD thx
blades supports only the old getwork protocol https://en.bitcoin.it/wiki/Getwork
stratum is a new protocol, used by most pools https://en.bitcoin.it/wiki/Stratum
you can use a pool which support getwork directly, btcmp.com for example
For best results use a (local) stratum proxy. An R-Pi is sufficient for this completely
yxt will you also be selling the ASICMINER USB hub which can hold 49 BE's?
any news?
Use stratum proxy !!!
Yes, i did it yesterday and it worked Sorry.
Why it's needed? What does it change?
yxt will you also be selling the ASICMINER USB hub which can hold 49 BE's?
Jump to: