Pages:
Author

Topic: Official Avalon Technical Support Thread - page 16. (Read 48888 times)

hero member
Activity: 956
Merit: 1001
I've modified the cronjob that checks whether cgminer is running to once every minute (instead of the 5 min).
Hopefully this will increase the effective hashrate by eliminating 5 min of downtime everytime cgminer hangs.

Any ideas why it was set to 5 min and not something shorter?
hero member
Activity: 956
Merit: 1001
It appears I have a v1.5 control board.  There is no USB hub.  USB cable goes directly from control board to router.



that p1 connector, check the middle red lead there, looks like that connector is not good?

Good eye Wink

The red lead popped off when I pulled the ribbon cables.  It feeds the red/green LED on the front panel.  I snapped the contact back into the housing after I took the pic.
newbie
Activity: 35
Merit: 0
It appears I have a v1.5 control board.  There is no USB hub.  USB cable goes directly from control board to router.



that p1 connector, check the middle red lead there, looks like that connector is not good?
member
Activity: 61
Merit: 10
It seems like several people are having trouble with their TP Link boards and may need new ones but don't have the tools/know how to make one. There may not be any interest if the wifi still works, but I thought I'd throw it out there anyway. If there's any interest in a new board (US only) that is "Avalon Ready" please PM me since I don't check this thread regularly.

I've modded these TP Link WR703N boards before with RAM upgrades, USB power mod, and flashed their firmware -- (i.e. everything you need for an Avalon). I'm in the US and if anyone wants a new modded TP Link unit I will sell them for 1BTC (includes standard shipping). I have them in stock on hand ready to ship.
hero member
Activity: 956
Merit: 1001
It appears I have a v1.5 control board.  There is no USB hub.  USB cable goes directly from control board to router.

hero member
Activity: 826
Merit: 1001
The cause of my system doing that was a flaky Ethernet port.  I moved the wireless access point near the units and now they have been running for 24 hours with no stops.
Thanks, since that's easier to try, I will do that first.
hero member
Activity: 826
Merit: 1001
getting cgminer restarts every 10-60 min.  I believe the longest uptime I've seen is 2hr and 2nd longest uptime is 1hr 17m.

I have the same. I started with default speed of 282mhz, and lowered it when I noticed they were average 50Gh.
Lowering didn't make much difference. Then I went for 300Mhz. Now I have it a lot less and getting close to 60Gh average?!

I am planning to replace a psu and see if that makes a difference.

My temps are low, ambiant is around 20 degrees C, Avalon temps around 45 degrees C.
sr. member
Activity: 315
Merit: 250
Official sponsor of Microsoft Corp.
hero member
Activity: 956
Merit: 1001
getting cgminer restarts every 10-60 min.  I believe the longest uptime I've seen is 2hr and 2nd longest uptime is 1hr 17m.

I stopped the cgminer process that was started on bootup, ssh'd in, and ran cgminer from cmdline to watch what was happening.

Noticed the following:

Quote
[2013-05-21 18:47:26] Accepted 02bd534f Diff 93/32 AVA 0
 [2013-05-21 18:47:36] Accepted 07193d6b Diff 36/32 AVA 0
 [2013-05-21 18:47:36] Accepted 02d5c4e6 Diff 90/32 AVA 0
 [2013-05-21 18:47:37] Accepted 054b656e Diff 48/32 AVA 0
 [2013-05-21 18:47:38] Accepted 07370597 Diff 35/32 AVA 0
 [2013-05-21 18:47:40] Accepted 06a76787 Diff 38/32 AVA 0
 [2013-05-21 18:47:42] Accepted 064da8aa Diff 40/32 AVA 0
 [2013-05-21 18:47:46] Accepted 02388552 Diff 115/32 AVA 0
 [2013-05-21 18:47:55] Accepted 009ef78f Diff 412/32 AVA 0
 [2013-05-21 18:47:56] Accepted 06e70c54 Diff 37/32 AVA 0
 [2013-05-21 18:48:01] Accepted 04addbfd Diff 54/32 AVA 0
 [2013-05-21 18:48:02] Accepted 02492f55 Diff 111/32 AVA 0
 [2013-05-21 18:48:04] Accepted 02d765f5 Diff 90/32 AVA 0
 [2013-05-21 18:48:05] Accepted 01d80ffc Diff 138/32 AVA 0
 [2013-05-21 18:48:08] Accepted 02c21d9d Diff 92/32 AVA 0
 [2013-05-21 18:48:10] Accepted 0067bc10 Diff 631/32 AVA 0
 [2013-05-21 18:48:12] Accepted 02a8640a Diff 96/32 AVA 0
 [2013-05-21 18:48:12] Accepted 02249de7 Diff 119/32 AVA 0
 [2013-05-21 18:48:24] Accepted 06387861 Diff 41/32 AVA 0
 [2013-05-21 18:48:28] Accepted 0259ab35 Diff 108/32 AVA 0
 [2013-05-21 18:48:28] Accepted 000ec825 Diff 4.43K/32 AVA 0
 [2013-05-21 18:48:31] Accepted 077780b5 Diff 34/32 AVA 0
 [2013-05-21 18:48:32] AVA0: invalid nonce - HW error
 [2013-05-21 18:49:34] AVA0: Idle for more than 60 seconds, declaring SICK!
 [2013-05-21 18:49:34] AVA0: Attempting to restart
 [2013-05-21 18:49:35] Avalon: Timeout on select in avalon_get_reset
 [2013-05-21 18:49:35] Avalon: Reset failed! not an Avalon? (0: 00 7e 32 e0)
 [2013-05-21 18:50:35] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:51:37] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:52:39] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:53:41] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:54:43] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:55:45] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:56:47] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:57:49] Avalon: Failed to open on /dev/ttyUSB0
 [2013-05-21 18:58:33] AVA0: Not responded for more than 10 minutes, declaring DEAD!
 [2013-05-21 18:59:35] Avalon: Failed to open on /dev/ttyUSB0

I have used the latest firmware (20130519) and also another test firmware provided to me by Aseras (050713.bin) with cgminer 3.1

Ambient room temps are about 78F.
Temps shown by Avalon are: Temp1-23   Temp2-40   Temp3-42
I have tried all clocks and I'm currently running at 256 (Normal)

Avalon team, any ideas?

TIA

With all the restarts, effective 24h hashrate is in the vicinity of 52-53GH
hero member
Activity: 658
Merit: 500
ran the first
Quote
make -j4

result:

Quote
.... (lines removed)
 make[3] -C feeds/luci/contrib/package/luci compile
localhost - - [19/May/2013 16:04:37] code 404, message File not found
localhost - - [19/May/2013 16:04:37] "GET /cgminer-3.1.1.tar.bz2 HTTP/1.1" 404 -
make -r world: build failed. Please re-run make with V=s to see what's going on
make: *** [world] Error 1
user@ubuntu:~/avalon/openwrt$

dont run make -j4 just run make
hero member
Activity: 658
Merit: 500
Quote
Let us know how it goes
The troublesome unit ran with a RaspberryPi all night and had no issues that I could see.  I don't have a hashrate grapher set up yet, but there were no errors displayed by cgminer, and the average hashrate was a sold 66 GH/s.

I then reconnected it to the TP-Link and let that run for half an hour.  Same problems.  So it's most likely a bad TP-Link.  She's back on the RaspberryPi, and I'll just keep it there.  I may even connect all the Avalons to the RasPi and/or BeagleBone Black.  Thanks to the little holes in the Avalon's case, it's easy to bring out the USB cable and still have the case closed.

So now I'm porting over all the misc. Avalon scripts to the RasPi, and looking around for a useful web interface so I can get quick stats without ssh-ing in all the time.


fpgaminer,

great news!  I've tried building cgminer for avalon on a spare linux box i had laying around.  Tried following these instructions:

http://en.qi-hardware.com/wiki/Avalon#How_to_Compile_Your_Own_WR703N_Firmware_for_Avalon

When i get to:

Quote
cp -R cgminer-openwrt-packages/cgminer openwrt/package

i get the following error:
Quote
root@ubuntu:~/avalon# cp -R cgminer-openwrt-packages/cgminer openwrt/package
cp: cannot create directory `openwrt/package': No such file or directory


Any help?  Anyone?  TIA.




the directions dont work. they need tweaking and typo fixing. also if you pull the latest cgminer it wont be right you have to roll back to certain commits.
hero member
Activity: 658
Merit: 500
help.org, sent you a pm.
sr. member
Activity: 473
Merit: 250
Sodium hypochlorite, acetone, ethanol
Everything has been running smoothly for a couple hours now.  I had notices just moving the unit slightly caused it stop hashing so it looks like a faulty Ethernet port but the wireless is working. 

Can I use an Ethernet to USB cable and bypass that little card on the Avalon? 

You are better off hooking up the USB devices from the faulty batch #2 unit to the USB hub of the stable batch #1 machine and run all the cgminer processes from the stable batch #1 machine, thus cutting out the faulty motherboard in the batch #2 machine.

In the mean time, you can either get a Raspberry Pi or a replacement TP-LINK WR703N

The wireless seems to be working.  I moved my wireless router into that room.  I don't want to touch anything.  If it breaks I will probably just do the USB thing like you say.

maybe the usb cable got disconnected during transport, it was same with my unit, just reconnect it and it will be fine if this is the case
legendary
Activity: 1112
Merit: 1000
Everything has been running smoothly for a couple hours now.  I had notices just moving the unit slightly caused it stop hashing so it looks like a faulty Ethernet port but the wireless is working. 

Can I use an Ethernet to USB cable and bypass that little card on the Avalon? 

You are better off hooking up the USB devices from the faulty batch #2 unit to the USB hub of the stable batch #1 machine and run all the cgminer processes from the stable batch #1 machine, thus cutting out the faulty motherboard in the batch #2 machine.

In the mean time, you can either get a Raspberry Pi or a replacement TP-LINK WR703N
sr. member
Activity: 315
Merit: 250
Official sponsor of Microsoft Corp.
Everything has been running smoothly for a couple hours now.  I had notices just moving the unit slightly caused it stop hashing so it looks like a faulty Ethernet port but the wireless is working. 

Can I use an Ethernet to USB cable and bypass that little card on the Avalon? 
It also can be noise in mains from AC, fridge, dishwasher... Even not yours. And it can be caused by static electricity (my GPU rig was restarted many times when I touch it during some periods of year when static is condensing on the body).
legendary
Activity: 892
Merit: 1002
1 BTC =1 BTC
I woke up and the black unit had stopped working so I guess the problem did not go away.

To optimize your hashingrate you can replace the hashing module that is malfunctioning in the batch-1 unit with one from the batch-2 (black).
And maybe it's possible to add one module from the black unit to the silver so you can mine 24/7 with 4 modules in the stable unit.

I say maybe because I don't know if the psu in your unit can handle 4 modules, 4*150+50=650 watt so the psu should be at least 750 watt. (but when using freq=300 more is better)

For better psu performance and lower unit temps you can make the psu external.
legendary
Activity: 892
Merit: 1002
1 BTC =1 BTC
Did you check the flat cables ? Are the connectors pushed into the sockets ?
hero member
Activity: 956
Merit: 1001
ran the first
Quote
make -j4

result:

Quote
.... (lines removed)
 make[3] -C feeds/luci/contrib/package/luci compile
localhost - - [19/May/2013 16:04:37] code 404, message File not found
localhost - - [19/May/2013 16:04:37] "GET /cgminer-3.1.1.tar.bz2 HTTP/1.1" 404 -
make -r world: build failed. Please re-run make with V=s to see what's going on
make: *** [world] Error 1
user@ubuntu:~/avalon/openwrt$
hero member
Activity: 956
Merit: 1001
In the wiki:

Quote
sed -i 's/ck.kolivas.org\/apps\/cgminer\//localhost:8000\//g' openwrt/package/cgminer/Makefile

should be:

Quote
sed -i 's/ck.kolivas.org\/apps\/cgminer\//localhost:8000\//g' package/cgminer/Makefile

since you are already in the openwrt directory.
hero member
Activity: 956
Merit: 1001
Ok.. thx to K1773R on irc was able to get it sorted out... the wiki i think needs some editing.

wiki has:
Quote
svn co svn://svn.openwrt.org/openwrt/trunk@35097 openwrt

with a "link" icon thingy after the 35097.  I stopped after the 35097 and the openwrt folder was never created.  Undecided

Pages:
Jump to: