Official BITMINE CoinCraft series 28nm ASIC miners thread - page 62.

johny08

legendary

Activity: 1045

Merit: 1000

Quote from: crocko on May 18, 2014, 03:32:35 PM

Quote from: johny08 on May 18, 2014, 01:16:04 PM

my stuff

LOOOOL !
The psychopatic part of telling us the truth.

Quote from: johny08 on May 18, 2014, 01:16:04 PM

And some of you need go to a doctor to get along that bitcoin has high risks and pre-orders are sort of gambling.

We are here to talk about ASICs, Bitcoin, money, hardware, software and other "addicting" stuff. Maybe this is too much for you or you can stop be so double-faced for a moment and delete your account on this forum.

I ordered and I will receive. Thats not doublefaced. I will not panik, misbehave troll around without reason.

Now you are on my ignorelist. troll now! spread the truth.

BitCoin Operated Boy

sr. member

Activity: 462

Merit: 250

Quote from: gpufreak on May 19, 2014, 11:14:00 AM

Quote from: AdamT on May 19, 2014, 09:10:14 AM

Can someone help me. I'm trying to call Bitmine and get answers of where my refund is (currently 49 days after I sent paperwork).

Calling from the US. Dialed 011 41 91 290 90 99

All I get is "the number you have dialed has not been recognized." Anyone know how to call them?

Their number was out of service today I guess, I had the same when dialing from Skype:

Code:

[19/05/14 15:27:07] xxx: Call started
[19/05/14 15:27:07] xxx: Call ended – phone network error

I called them today 4 hours ago and got through without a problem

BitCoin Operated Boy

sr. member

Activity: 462

Merit: 250

Quote from: AdamT on May 19, 2014, 09:10:14 AM

Can someone help me. I'm trying to call Bitmine and get answers of where my refund is (currently 49 days after I sent paperwork).

Calling from the US. Dialed 011 41 91 290 90 99

All I get is "the number you have dialed has not been recognized." Anyone know how to call them?

It's Europe so you have to use country code 0041 or +41 not 01 as for
USA
Also, as stated on website lines are open Mon-Fri between 10am -12pm and 2pm-4pm. So you need to recalculate your time zone difference

atta2k15

sr. member

Activity: 315

Merit: 250

Quote from: AdamT on May 19, 2014, 09:10:14 AM

Can someone help me. I'm trying to call Bitmine and get answers of where my refund is (currently 49 days after I sent paperwork).

Calling from the US. Dialed 011 41 91 290 90 99

All I get is "the number you have dialed has not been recognized." Anyone know how to call them?

+41 91 290 90 99=

0041 91 290 90 99

gpufreak

newbie

Activity: 42

Merit: 0

Quote from: AdamT on May 19, 2014, 09:10:14 AM

Can someone help me. I'm trying to call Bitmine and get answers of where my refund is (currently 49 days after I sent paperwork).

Calling from the US. Dialed 011 41 91 290 90 99

All I get is "the number you have dialed has not been recognized." Anyone know how to call them?

Their number was out of service today I guess, I had the same when dialing from Skype:

Code:

[19/05/14 15:27:07] xxx: Call started
[19/05/14 15:27:07] xxx: Call ended – phone network error

AdamT

hero member

Activity: 486

Merit: 500

Can someone help me. I'm trying to call Bitmine and get answers of where my refund is (currently 49 days after I sent paperwork).

Calling from the US. Dialed 011 41 91 290 90 99

All I get is "the number you have dialed has not been recognized." Anyone know how to call them?

SwissMiner

sr. member

Activity: 294

Merit: 250

Quote from: ?? on ??

http://cms.ihksaarland.de/ihk-saarland/Integrale?SID=CRAWLER&MODULE=Frontend.Media&ACTION=ViewMediaObject&Media.PK=1709&Media.Object.ObjectType=full

Inkasso Deutschland Scheiz mit Preisangabe

+1

lex150

newbie

Activity: 3

Merit: 0

I sent refund form BTC 4 March 2014. Passed 77 days! Where are my BTC?!!!!
50btc.com ID: 325 29.09. 2013
BITMINE.CH ID: 3090 25.11.2013

RoboRob67

newbie

Activity: 42

Merit: 0

Quote from: saurabh on May 18, 2014, 03:47:55 PM

Quote from: makki on May 18, 2014, 02:01:35 PM

Thanks again johnny, i opened it up and it said that its was dual voltage 110/220. but now i have another issue,

when it boots all i get is the below image, no IP address or anything appearing. fan isn't even turned on.

has anyone had this problem before?

I believe some wires inside the box may be loose, just open it and check...

Check if the Raspberry Pi board is properly piggy backed on the little red board below it, mine was loose as well in one of the desks. After fitting it properly all was well and the machine was booting op in 15 seconds...

SwissMiner

sr. member

Activity: 294

Merit: 250

.. the SCAM have a face Cry

picture (c) 20min.ch

left: Christian Anselmi
right: Giorgio Massarotto

makki

newbie

Activity: 24

Merit: 0

thanks for all the help guys, i reimaged the SD card and its working now. thanks..

also the unit is on Sale. Check other thread in same section

RoboRob67

newbie

Activity: 42

Merit: 0

Quote from: makki on May 18, 2014, 01:28:09 PM

Quote from: johny08 on May 18, 2014, 01:18:26 PM

Quote from: makki on May 18, 2014, 01:14:01 PM

Hi all,

Ordered in December, orde4327, received it today. 400Ghz pushed upto 600GHs with CCP. Attached are the photos.

Although can someone tell me what voltage it needs? in Saudi we use both 110V and 220V, what should i plug the coincraft desk into?

It depends on the fuse you have on which voltage. This 600 Watt you can run on both. take the 220 V, its better for you, when you dont have any other big machines connected to that fuse.

Hey johnnu thanks for responding,

but i dont understand what you mean. i have 2 wall sockets, 1 running at 110V and another running 220V, which should i plug the device into? i know that plugging it into the wrong voltage would damage it.

take the 220v...

locke916

newbie

Activity: 19

Merit: 0

@ makki
check the piece that is connecting all the blades. It has double-row plugs. It can easily happen that only one row is plugged in.
If that happens you have a behaviour as you described.

Gogreen

sr. member

Activity: 392

Merit: 250

Check the sd card take out and inset again or get a new sd card and burn a new firmware from Bitmine

saurabh

member

Activity: 70

Merit: 10

Quote from: makki on May 18, 2014, 02:01:35 PM

Thanks again johnny, i opened it up and it said that its was dual voltage 110/220. but now i have another issue,

when it boots all i get is the below image, no IP address or anything appearing. fan isn't even turned on.

has anyone had this problem before?

I believe some wires inside the box may be loose, just open it and check...

crocko

hero member

Activity: 826

Merit: 1000

'All that glitters is not gold'

Quote from: johny08 on May 18, 2014, 01:16:04 PM

What i read here, guys dont make refunds. Its probably taking longer as shippment of the miners. Thats clear, when they ordered and bought the pieces for you miner, then they have first to sell it and the refund you. Dont be dumb.

LOOOOL !
FYI, Bitmine can reuse all parts from an ASIC. If you ask for a refund, nothing BAD will happen to you, only Bitmine.ch will have less profit. And this is by their fault 100% !
Some of us (ME included) choose the refund, others choose the ASIC to be delivered.
Unfortunately nothing it's happens for more than HALF OF THE YEAR !!
So STOP spreading FUD !
Your logic it is so twisted !

Quote from: johny08 on May 18, 2014, 01:16:04 PM

And some of you need go to a doctor to get along that bitcoin has high risks and pre-orders are sort of gambling.

We are here to talk about ASICs, Bitcoin, money, hardware, software and other "addicting" stuff. Maybe this is too much for you or you can stop be so double-faced for a moment and delete your account on this forum.

Wolke

legendary

Activity: 966

Merit: 1000

Quote from: makki on May 18, 2014, 02:23:42 PM

ten minutes maybe, how long do they usually need? imight keep it on for a few hours and see what happens then

ok sry... i mean more -> 2 - 3 min. -

makki

newbie

Activity: 24

Merit: 0

ten minutes maybe, how long do they usually need? imight keep it on for a few hours and see what happens then

Wolke

legendary

Activity: 966

Merit: 1000

how long did you wait ?

some miners need very long...

makki

newbie

Activity: 24

Merit: 0

Thanks again johnny, i opened it up and it said that its was dual voltage 110/220. but now i have another issue,

when it boots all i get is the below image, no IP address or anything appearing. fan isn't even turned on.

has anyone had this problem before?

http://i.imgur.com/SlhGf6g.jpg

Topic: Official BITMINE CoinCraft series 28nm ASIC miners thread - page 62. (Read 565240 times)