OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 160.

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: -ck on December 08, 2013, 03:52:53 PM

Quote from: jmc1517 on December 08, 2013, 01:35:52 PM

Quote from: aigeezer on December 08, 2013, 07:46:32 AM

Quote from: -ck on December 07, 2013, 06:32:05 PM

Here is a sequence of exes to try please. It will emulate a transaction translator for usb1.1 devices.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-w2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w10d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw10d10.exe

If any of these prove to work, there is no need to test the ones further down, thanks!

The first one (w1d10) got one zombie during an unattended 12-hour run. It replugged with no problem. I'll try w2d10 now.

"w1d10" has been mining for 3 hours now and no actual zombies yet, but it is behaving rather strangely. I am regularly getting "rafts" of LEDs coming on - perhaps 15 or more, then another 1,2,3.... 7,8 or so, making 17-25 all on at once, then they all go out and everything looks normal again. Nothing abnormal in the log file and my hash rate is ok at the pool. I would say this looks very promising - if it were not for the disconcerting appearance of seeing all those LEDs going on and off...!!

Edit: Of course it could be my wonderful (not!) broadband playing up - but that typically results in *all* LEDs coming on for 5 seconds or so and then going off en-masse. What I'm seeing here happens perhaps once every 10, 15 or 30 minutes, and no "pool unavailable" messages.

Thanks very much for that. I'm pretty sure this is the right track since kano confirms it fixes his 3 AMUs mining on a USB3 hub on his RPi which previously wouldn't work at all unless he daisy chained it via a USB2 one. I don't think the -rw* versions will need to be tested and it will be a matter of whether it's 1d10 or whether I need 2d10 to roll a double 0 ftw.

My w2d10 test looks good, eight hours in to the run. No reallocations, no zombies, no "light show" so far, although occasional single-LED multi-second displays.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: jmc1517 on December 08, 2013, 01:35:52 PM

Quote from: aigeezer on December 08, 2013, 07:46:32 AM

Quote from: -ck on December 07, 2013, 06:32:05 PM

Here is a sequence of exes to try please. It will emulate a transaction translator for usb1.1 devices.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-w2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w10d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw10d10.exe

If any of these prove to work, there is no need to test the ones further down, thanks!

The first one (w1d10) got one zombie during an unattended 12-hour run. It replugged with no problem. I'll try w2d10 now.

"w1d10" has been mining for 3 hours now and no actual zombies yet, but it is behaving rather strangely. I am regularly getting "rafts" of LEDs coming on - perhaps 15 or more, then another 1,2,3.... 7,8 or so, making 17-25 all on at once, then they all go out and everything looks normal again. Nothing abnormal in the log file and my hash rate is ok at the pool. I would say this looks very promising - if it were not for the disconcerting appearance of seeing all those LEDs going on and off...!!

Edit: Of course it could be my wonderful (not!) broadband playing up - but that typically results in *all* LEDs coming on for 5 seconds or so and then going off en-masse. What I'm seeing here happens perhaps once every 10, 15 or 30 minutes, and no "pool unavailable" messages.

Thanks very much for that. I'm pretty sure this is the right track since kano confirms it fixes his 3 AMUs mining on a USB3 hub on his RPi which previously wouldn't work at all unless he daisy chained it via a USB2 one. I don't think the -rw* versions will need to be tested and it will be a matter of whether it's 1d10 or whether I need 2d10 to roll a double 0 ftw.

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: os2sam on December 08, 2013, 01:40:35 PM

Quote from: blazin8s on December 08, 2013, 01:36:21 PM

when using gpu-reorder what is the official slot order the program uses? It appears to be mixed up.

I'm pretty sure your at the whim of the OS as to how it assigns the order.

That and it may/will change from time to time.

M

os2sam

legendary

Activity: 3586

Merit: 1099

Think for yourself

Quote from: blazin8s on December 08, 2013, 01:36:21 PM

when using gpu-reorder what is the official slot order the program uses? It appears to be mixed up.

I'm pretty sure your at the whim of the OS as to how it assigns the order.

blazin8s

full member

Activity: 180

Merit: 100

when using gpu-reorder what is the official slot order the program uses? It appears to be mixed up.

jmc1517

newbie

Activity: 56

Merit: 0

Quote from: aigeezer on December 08, 2013, 07:46:32 AM

Quote from: -ck on December 07, 2013, 06:32:05 PM

Here is a sequence of exes to try please. It will emulate a transaction translator for usb1.1 devices.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-w2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w10d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw10d10.exe

If any of these prove to work, there is no need to test the ones further down, thanks!

The first one (w1d10) got one zombie during an unattended 12-hour run. It replugged with no problem. I'll try w2d10 now.

"w1d10" has been mining for 3 hours now and no actual zombies yet, but it is behaving rather strangely. I am regularly getting "rafts" of LEDs coming on - perhaps 15 or more, then another 1,2,3.... 7,8 or so, making 17-25 all on at once, then they all go out and everything looks normal again. Nothing abnormal in the log file and my hash rate is ok at the pool. I would say this looks very promising - if it were not for the disconcerting appearance of seeing all those LEDs going on and off...!!

Edit: Of course it could be my wonderful (not!) broadband playing up - but that typically results in *all* LEDs coming on for 5 seconds or so and then going off en-masse. What I'm seeing here happens perhaps once every 10, 15 or 30 minutes, and no "pool unavailable" messages.

padrino

legendary

Activity: 1428

Merit: 1000

https://www.bitworks.io

I am trying to sort through the getwork logic in Anubis, given the fact that with the stratum protocol getwork != number of shares the calculations are off.

Hoping someone can provide some recommendations about how one might go about calculating something meaningful regarding total shares vs. getwork requests to in turn calculate meaningful discards statistics?

Gwindor

newbie

Activity: 28

Merit: 0

Quote from: mdude77 on December 08, 2013, 10:27:39 AM

Quote from: Gwindor on December 08, 2013, 10:09:48 AM

Hey guys when i try to run chminer it shuts in a second.

I installed amd sdk but no change.

i have windows 7 64bit home premium
7700hd gzh edition gpu

which step i do wrong i cant get.

i put .bat to cgminer directory and run .bat than msdos openin and shutting in half second...

cgminer no longer supports GPU mining. I believe 3.7.2 is the last version that supports it.

M

yes i know this and i was trying with that version.

suddenly i tried again and it worked... lol shocked thanks for help anyway.

i have 7700hd any advice for script code?

mdude77

legendary

Activity: 1540

Merit: 1001

Quote from: Gwindor on December 08, 2013, 10:09:48 AM

Hey guys when i try to run chminer it shuts in a second.

I installed amd sdk but no change.

i have windows 7 64bit home premium
7700hd gzh edition gpu

which step i do wrong i cant get.

i put .bat to cgminer directory and run .bat than msdos openin and shutting in half second...

cgminer no longer supports GPU mining. I believe 3.7.2 is the last version that supports it.

M

Gwindor

newbie

Activity: 28

Merit: 0

Hey guys when i try to run chminer it shuts in a second.

I installed amd sdk but no change.

i have windows 7 64bit home premium
7700hd gzh edition gpu

which step i do wrong i cant get.

i put .bat to cgminer directory and run .bat than msdos openin and shutting in half second...

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: -ck on December 07, 2013, 06:32:05 PM

Here is a sequence of exes to try please. It will emulate a transaction translator for usb1.1 devices.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-w2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w10d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw10d10.exe

If any of these prove to work, there is no need to test the ones further down, thanks!

The first one (w1d10) got one zombie during an unattended 12-hour run. It replugged with no problem. I'll try w2d10 now.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: erk on December 08, 2013, 03:44:48 AM

Quote from: cxboyminer on December 08, 2013, 02:43:39 AM

Hope that will help new people transferring from bfgminer to cgminer Tongue

seeing cgminer no longer supports scrypt mining the transfers are probably in the other direction, as scrypt is very popular again with the rise in alt coin prices. That said I still prefer using cgminer.

That's really quite funny and hypocritical given luke-Jr considers all altcoins scams yet he pulled my scrypt code and is now maintaining the only maintained scrypt GPU miner on these forums.

erk

hero member

Activity: 826

Merit: 500

Quote from: cxboyminer on December 08, 2013, 02:43:39 AM

Quote from: -ck on December 07, 2013, 06:59:54 PM

Quote from: cxboyminer on December 07, 2013, 05:52:07 PM

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

Much appreciated, thanks!

Hope that will help new people transferring from bfgminer to cgminer Tongue

seeing cgminer no longer supports scrypt mining the transfers are probably in the other direction, as scrypt is very popular again with the rise in alt coin prices. That said I still prefer using cgminer.

cxboyminer

hero member

Activity: 896

Merit: 500

Quote from: -ck on December 07, 2013, 06:59:54 PM

Quote from: cxboyminer on December 07, 2013, 05:52:07 PM

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

Much appreciated, thanks!

Hope that will help new people transferring from bfgminer to cgminer Tongue

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: cxboyminer on December 07, 2013, 05:52:07 PM

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

Much appreciated, thanks!

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Here is a sequence of exes to try please. It will emulate a transaction translator for usb1.1 devices.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-w2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw1d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw2d10.exe

http://ck.kolivas.org/apps/cgminer/temp/cgminer-w10d10.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-rw10d10.exe

If any of these prove to work, there is no need to test the ones further down, thanks!

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: aigeezer on December 07, 2013, 06:20:56 PM

Quote from: jmc1517 on December 07, 2013, 01:01:35 PM

It seems that this version tries hard to keep things going, but I seem to be seeing more initial disturbances (LEDs on for a second or more then disappearing, then maybe a zombie which replugs automatically etc.)

I got a cluster of four (almost) simultaneous zombies and was going to make a routine post agreeing with your observation about clusters of LEDs on, when things got weird for me. On a lazy whim, I tried Q and restarting cgminer hoping it might cure all four zombies at once. It didn't, so I unplugged and replugged the hubs and everything seemed back to normal. The cgminer display showed all units hashing normally and the AMU LEDs and BAL fan all seemed normal. I looked at my stats on Slush's pool and was startled to see the "last share at" timer creeping upward. No work from this 'puter was registering at the pool. The cgminer display showed the pool connection normally. I looked at a few other things and waited to see if it would recover but it did not. After 14 minutes I quit and restarted cgminer and the counter at the pool site recovered immediately. I've never seen that happen before, but it looks like a potentially serious effect from something or other I did in a too-casual zombie recovery/restart.

I suspect it's actually managing to crash the hub itself and the hub needs resetting. Ugly.

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: jmc1517 on December 07, 2013, 01:01:35 PM

It seems that this version tries hard to keep things going, but I seem to be seeing more initial disturbances (LEDs on for a second or more then disappearing, then maybe a zombie which replugs automatically etc.)

I got a cluster of four (almost) simultaneous zombies and was going to make a routine post agreeing with your observation about clusters of LEDs on, when things got weird for me. On a lazy whim, I tried Q and restarting cgminer hoping it might cure all four zombies at once. It didn't, so I unplugged and replugged the hubs and everything seemed back to normal. The cgminer display showed all units hashing normally and the AMU LEDs and BAL fan all seemed normal. I looked at my stats on Slush's pool and was startled to see the "last share at" timer creeping upward. No work from this 'puter was registering at the pool. The cgminer display showed the pool connection normally. I looked at a few other things and waited to see if it would recover but it did not. After 14 minutes I quit and restarted cgminer and the counter at the pool site recovered immediately. I've never seen that happen before, but it looks like a potentially serious effect from something or other I did in a too-casual zombie recovery/restart.

cxboyminer

hero member

Activity: 896

Merit: 500

Ckolivas,

I just made a video on cgminer for mac installation tutorial... hope that helps...

Progress: DONE

http://youtu.be/FWd03bqfURg

Zhukov0

newbie

Activity: 60

Merit: 0

Quote from: -ck on December 07, 2013, 05:22:44 PM

Quote from: Zhukov0 on December 07, 2013, 05:15:27 PM

Hi people, i've got a little problem. I want to mine in some places where putting no password is required... but i can't use CGMINER without a password. I can't execute without the -p parameter, i can't use -p xxx for example (it doesn't connect to pool or doesn't get any share), and also i can't use --username=user:

Somebody know how can i do it??? I tried lot of versions of CGMINER, including the last one compatible with GPU mining (3.7.2)

Connecting via stratum, getwork or GBT ALWAYS takes a password, even if it is ignored, so your pool is broken.

It's weird, because i was trying to use P2Pool and Bitparking... P2Pool was working some time ago with any kind of password, but now some pools of p2pool doesn't work if i put some kind of password.

Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 160. (Read 5806015 times)