OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 193.

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: PatMan on October 28, 2013, 02:09:18 PM

ckolivas,

I gotta say, respect to you for the work & effort you're putting in with this winblows "buglet". I'm not a winblows user, but your efforts getting things right are highly admired my man.

Kudos.

I'm very impressed with ckolivas' patience also, and from the outset I've been afraid that it would turn out to be All My Fault. Luckily for me, jmc1517 is still in the game. Perhaps there's also a silent majority of Windows users out there somewhere watching and waiting.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: -ck on October 28, 2013, 02:00:00 PM

Quote from: aigeezer on October 28, 2013, 11:49:52 AM

Hmm, still something I'm missing here. It's interesting that it's the same one so perhaps it's prone to some comm error which the code never recovers from.

Next please:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwa8.exe

And here's 2 more just in case you haven't played enough.

http://ck.kolivas.org/apps/cgminer/temp/cgminer-chop8.exe
http://ck.kolivas.org/apps/cgminer/temp/cgminer-chop10.exe

PatMan

hero member

Activity: 924

Merit: 1000

Watch out for the "Neg-Rep-Dogie-Police".....

ckolivas,

I gotta say, respect to you for the work & effort you're putting in with this winblows "buglet". I'm not a winblows user, but your efforts getting things right are highly admired my man.

Kudos.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: aigeezer on October 28, 2013, 11:49:52 AM

I just noticed a failure in my cwani test. One AMU unit has gone to zero hash rate and its LED is staying on. Not sure exactly when it first happened, but I'm 3.75 hours into the run.

Edit: I hot-swapped it and it's fine now. As before, the display reported a zombie as soon as I unplugged it, and it was reallocated (to AMU13) on restart. The run continues with only this one failure so far. LEDs still often come on for several seconds at a time.

Edit: A "real" zombie at last, 4.3 hours in. It happens to be the same physical AMU unit that went to zero before. Coincidence, perhaps. I'll hot swap it if I can.

Hmm, still something I'm missing here. It's interesting that it's the same one so perhaps it's prone to some comm error which the code never recovers from.

Next please:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwa8.exe

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

I just noticed a failure in my cwani test. One AMU unit has gone to zero hash rate and its LED is staying on. Not sure exactly when it first happened, but I'm 3.75 hours into the run.

Edit: I hot-swapped it and it's fine now. As before, the display reported a zombie as soon as I unplugged it, and it was reallocated (to AMU13) on restart. The run continues with only this one failure so far. LEDs still often come on for several seconds at a time.

Edit: A "real" zombie at last, 4.3 hours in. It happens to be the same physical AMU unit that went to zero before. Coincidence, perhaps. I'll hot swap it if I can.

jmc1517

newbie

Activity: 56

Merit: 0

Quote from: -ck on October 28, 2013, 07:52:00 AM

Quote from: aigeezer on October 28, 2013, 07:47:58 AM

My cwa2 update: after 12.3 hours total run time I see two zombies and one AMU with hash-rate down to zero. No other messages. LEDs are on solid for three units, of course.

Thanks!

Next addition edition since both of those seemed to "help":

http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwani.exe

I have had cgminer-cwani running for about 38 minutes, seemingly going OK. One amu LED came on at 12:23 for a couple of seconds, then went out again (possibly due to a share taking too long to be found? AMU 4 perhaps?), so I wandered off for a while. When I returned I had 4 zombies which appeared to all have occured at about the same time, so I have stopped the test.

logfile here (without --debug):
https://dl.dropboxusercontent.com/u/44240170/logfile-cwani.txt

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: -ck on October 28, 2013, 07:52:00 AM

Quote from: aigeezer on October 28, 2013, 07:47:58 AM

My cwa2 update: after 12.3 hours total run time I see two zombies and one AMU with hash-rate down to zero. No other messages. LEDs are on solid for three units, of course.

Thanks!

Next addition edition since both of those seemed to "help":

http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwani.exe

OK - cwani version started fine. Running now.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: aigeezer on October 28, 2013, 07:47:58 AM

My cwa2 update: after 12.3 hours total run time I see two zombies and one AMU with hash-rate down to zero. No other messages. LEDs are on solid for three units, of course.

Thanks!

Next addition edition since both of those seemed to "help":

http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwani.exe

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

My cwa2 update: after 12.3 hours total run time I see two zombies and one AMU with hash-rate down to zero. No other messages. LEDs are on solid for three units, of course.

Edit: I hot-swapped all three and they all resumed hashing. The one that had been at zero changed to zombie status when it was first unplugged and recovered like the others when it was plugged back in. The run continues, looking normal now.

jmc1517

newbie

Activity: 56

Merit: 0

Test results:

cgminer-chop : 2 zombies and one with zero hash count (light fully on) in about 30 minutes.

logfile (without --debug) here:
https://dl.dropboxusercontent.com/u/44240170/logfile-chop.txt

I'll go on to cwa2 next...

Well that didn't take long. 1 zombie after only 6 minutes.

logfile (without --debug) here:
https://dl.dropboxusercontent.com/u/44240170/logfile-cwa2.txt

Back to my "gold-standard" 3.3.1 for now then... Sad

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: -ck on October 27, 2013, 09:14:03 PM

Very interesting. Did you spot any displayed usb errors or warnings on the screen?

Nothing at all - only the counter slowly decrementing. Since then the run continues with occasional long LED displays - about 10 seconds, but no failures. I'll probably leave it to run for about 10 more hours before I look at this thread again. It has run for about 2.25 hours so far.

Thanks!

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: aigeezer on October 27, 2013, 07:18:06 PM

Quote from: -ck on October 27, 2013, 07:15:52 PM

Quote from: -ck on October 27, 2013, 06:27:16 PM

Quote from: aigeezer on October 27, 2013, 05:37:55 PM

Thanks a lot, it is suspicious that something's changing. Maybe we can combine some of these experiments then. More soon.

Here's another:

http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwa2.exe

Thanks!

OK, I'll try cwa2 in a moment. "Chop" is still running. It only had two zombies despite all the bright lights. I could hot-swap both and it recovered. Run time about 1.5 hours.

Edit: the cwa2 test has been interesting. It ran for about 20 minutes with several heart-stopping LED incidents of 10-12 seconds each. All recovered though until one stayed on for even longer. I looked at the display expecting to see a zombie but instead saw the hashrate counter decrementing slowly. It took the poor thing about three minutes to get all the way down to zero, where it has stayed for a while. I'll see if I can hot-swap it now.

Edit: Yes, the display changed to zombie as soon as I unplugged it, the rate started to climb back up from zero and then the device got reallocated to AMU13. The test continues with no other quirks so far.

Very interesting. Did you spot any displayed usb errors or warnings on the screen?

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: -ck on October 27, 2013, 07:15:52 PM

Quote from: -ck on October 27, 2013, 06:27:16 PM

Quote from: aigeezer on October 27, 2013, 05:37:55 PM

Thanks a lot, it is suspicious that something's changing. Maybe we can combine some of these experiments then. More soon.

Here's another:

http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwa2.exe

Thanks!

OK, I'll try cwa2 in a moment. "Chop" is still running. It only had two zombies despite all the bright lights. I could hot-swap both and it recovered. Run time about 1.5 hours.

Edit: the cwa2 test has been interesting. It ran for about 20 minutes with several heart-stopping LED incidents of 10-12 seconds each. All recovered though until one stayed on for even longer. I looked at the display expecting to see a zombie but instead saw the hashrate counter decrementing slowly. It took the poor thing about three minutes to get all the way down to zero, where it has stayed for a while. I'll see if I can hot-swap it now.

Edit: Yes, the display changed to zombie as soon as I unplugged it, the rate started to climb back up from zero and then the device got reallocated to AMU13. The test continues with no other quirks so far.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: -ck on October 27, 2013, 06:27:16 PM

Quote from: aigeezer on October 27, 2013, 05:37:55 PM

Thanks a lot, it is suspicious that something's changing. Maybe we can combine some of these experiments then. More soon.

Here's another:

http://ck.kolivas.org/apps/cgminer/temp/cgminer-cwa2.exe

Thanks!

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: aigeezer on October 27, 2013, 05:37:55 PM

Quote from: -ck on October 27, 2013, 05:11:51 PM

Quote from: -ck on October 27, 2013, 04:23:31 PM

Thanks very much for trying all those, guys. I'll see what else I can come up with, but this will be the only way I'll be able to find it since you can reproduce it so easily.

Here's another please:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-chop.exe

Starting "chop" test now. The "oh" version was still running fine with log/debug on after 4.25 hours. Looks like that pattern is holding.

I love the names for the various test versions - fun to imagine what they might stand for.

Edit: just 5 minutes into the "chop" test one LED came on for a couple of seconds but it didn't go zombie. I don't think I've ever seen that before - maybe one second at the most. May not be relevant, but it was unusual.

Edit: Breakthrough? LEDs are going on all over the place but then they go out again, often after 10 seconds or more. No zombies flagged. Every one recovers so far. Run is about 14 minutes old.

Edit: AMU 5 finally went zombie about 35 minutes into the run.

Thanks a lot, it is suspicious that something's changing. Maybe we can combine some of these experiments then. More soon.

kano

legendary

Activity: 4592

Merit: 1851

Linux since 1997 RedHat 4

Quote from: aigeezer on October 27, 2013, 04:00:22 PM

Quote from: EfterlysT on October 27, 2013, 03:57:44 PM

I have a question because i dont get it to work.

I just setup some USB Erupters for mining PPC instead of PPC.

This is the command line i use right now:
cgminer -o http://stratum.d7.lt:3333 -u user -p pass

Everything runs ok but my GPU also starts to mine. What do i add to disable my GPU from mining ?

Try cgminer-nogpu instead of cgminer

Or add the -G option to the GPU version to disable GPU mining

aigeezer

legendary

Activity: 1450

Merit: 1013

Cryptanalyst castrated by his government, 1952

Quote from: -ck on October 27, 2013, 05:11:51 PM

Quote from: -ck on October 27, 2013, 04:23:31 PM

Thanks very much for trying all those, guys. I'll see what else I can come up with, but this will be the only way I'll be able to find it since you can reproduce it so easily.

Here's another please:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-chop.exe

Starting "chop" test now. The "oh" version was still running fine with log/debug on after 4.25 hours. Looks like that pattern is holding.

I love the names for the various test versions - fun to imagine what they might stand for.

Edit: just 5 minutes into the "chop" test one LED came on for a couple of seconds but it didn't go zombie. I don't think I've ever seen that before - maybe one second at the most. May not be relevant, but it was unusual.

Edit: Breakthrough? LEDs are going on all over the place but then they go out again, often after 10 seconds or more. No zombies flagged. Every one recovers so far. Run is about 14 minutes old.

Edit: AMU 5 finally went zombie about 35 minutes into the run.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: -ck on October 27, 2013, 04:23:31 PM

Thanks very much for trying all those, guys. I'll see what else I can come up with, but this will be the only way I'll be able to find it since you can reproduce it so easily.

Here's another please:
http://ck.kolivas.org/apps/cgminer/temp/cgminer-chop.exe

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Thanks very much for trying all those, guys. I'll see what else I can come up with, but this will be the only way I'll be able to find it since you can reproduce it so easily.

-ck

legendary

Activity: 4088

Merit: 1631

Ruu \o/

Quote from: rav3n_pl on October 27, 2013, 01:29:12 PM

I`m still running previous one w/o any trouble 7hrs now. 2x usb erupter directly to PC + 30GH/s BFL.
Should I try another one?

Nono, if it's working fine for you, stick with it. These are attempts to find the problem with aigeezer's

Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 193. (Read 5805531 times)