Topic: OFFICIAL CGMINER mining software thread for linux/win/osx/mips/arm/r-pi 4.11.0 - page 229. (Read 5806004 times)

I didn't get the dmesg before opening cgminer 3.3.4 to get myself back up and running not sure if that will matter.

dmesg output:

[    0.000000] Booting Linux on physical CPU 0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.6.11+ (dc4@dc4-arm-01) (gcc version 4.7.2 20120731 (prerelease) (crosstool-NG linaro-1.13.1+bzr2458 - Linaro GCC 2012.08) ) #514 PREEMPT Tue Jul 30 23:14:45 BST 2013
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] cma: CMA: reserved 16 MiB at 1b000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c053d894, node_mem_map c05e7000
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 113792 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc:

• 0

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708.boardrev=0xf bcm2708.serial=0x80ec5b8d smsc95xx.macaddr=B8:27:EB:EC:5B:8D sdhci-bcm2708.emmc_clock_freq=100000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 448MB = 448MB total
[    0.000000] Memory: 432256k/432256k available, 26496k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xff000000   ( 552 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc04e74d8   (4990 kB)
[    0.000000]       .init : 0xc04e8000 - 0xc0508f44   ( 132 kB)
[    0.000000]       .data : 0xc050a000 - 0xc053e0c0   ( 209 kB)
[    0.000000]        .bss : 0xc053e0e4 - 0xc05e6d18   ( 676 kB)
[    0.000000] NR_IRQS:330
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.001009] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060127] pid_max: default: 32768 minimum: 301
[    0.060461] Mount-cache hash table entries: 512
[    0.061218] Initializing cgroup subsys cpuacct
[    0.061275] Initializing cgroup subsys devices
[    0.061309] Initializing cgroup subsys freezer
[    0.061337] Initializing cgroup subsys blkio
[    0.061427] CPU: Testing write buffer coherency: ok
[    0.061757] hw perfevents: enabled with v6 PMU driver, 3 counters available
[    0.061897] Setting up static identity map for 0x39e678 - 0x39e6d4
[    0.063386] devtmpfs: initialized
[    0.074096] NET: Registered protocol family 16
[    0.080567] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.081670] bcm2708.uart_clock = 0
[    0.083060] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.083114] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.083150] mailbox: Broadcom VideoCore Mailbox driver
[    0.083244] bcm2708_vcio: mailbox at f200b880
[    0.083346] bcm_power: Broadcom power driver
[    0.083383] bcm_power_open() -> 0
[    0.083409] bcm_power_request(0,
[    0.584095] bcm_mailbox_read -> 00000080, 0
[    0.584135] bcm_power_request -> 0
[    0.584161] Serial: AMBA PL011 UART driver
[    0.584304] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83) is a PL011 rev3
[    0.908140] console [ttyAMA0] enabled
[    0.932105] bio: create slab at 0
[    0.936994] SCSI subsystem initialized
[    0.941091] usbcore: registered new interface driver usbfs
[    0.946674] usbcore: registered new interface driver hub
[    0.952262] usbcore: registered new device driver usb
[    0.958610] Switching to clocksource stc
[    0.962845] FS-Cache: Loaded
[    0.965975] CacheFiles: Loaded
[    0.980843] NET: Registered protocol family 2
[    0.986118] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.993859] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[    1.000649] TCP: Hash tables configured (established 16384 bind 16384)
[    1.007254] TCP: reno registered
[    1.010509] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    1.016408] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    1.022986] NET: Registered protocol family 1
[    1.027849] RPC: Registered named UNIX socket transport module.
[    1.033889] RPC: Registered udp transport module.
[    1.038611] RPC: Registered tcp transport module.
[    1.043357] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.050469] bcm2708_dma: DMA manager at f2007000
[    1.055257] bcm2708_gpio: bcm2708_gpio_probe c0517d98
[    1.060721] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.069863] audit: initializing netlink socket (disabled)
[    1.075458] type=2000 audit(0.930:1): initialized
[    1.197712] VFS: Disk quotas dquot_6.5.2
[    1.201744] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.208806] FS-Cache: Netfs 'nfs' registered for caching
[    1.214550] NFS: Registering the id_resolver key type
[    1.219720] Key type id_resolver registered
[    1.224014] Key type id_legacy registered
[    1.228376] msgmni has been set to 876
[    1.233906] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.241619] io scheduler noop registered
[    1.245665] io scheduler deadline registered (default)
[    1.250848] io scheduler cfq registered
[    1.275760] Console: switching to colour frame buffer device 82x26
[    1.285855] kgdb: Registered I/O driver kgdboc.
[    1.292430] vc-cma: Videocore CMA driver
[    1.297843] vc-cma: vc_cma_base      = 0x00000000
[    1.303946] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.310650] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.326249] brd: module loaded
[    1.335566] loop: module loaded
[    1.340337] vchiq: vchiq_init_state: slot_zero = 0xdb000000, is_master = 0
[    1.349278] Loading iSCSI transport class v2.0-870.
[    1.356507] usbcore: registered new interface driver smsc95xx
[    1.363979] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.576204] Core Release: 2.80a
[    1.580620] Setting default values for core params
[    1.586751] Finished setting default values for core params
[    1.798714] Using Buffer DMA mode
[    1.803332] Periodic Transfer Interrupt Enhancement - disabled
[    1.810395] Multiprocessor Interrupt Enhancement - disabled
[    1.817228] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.822861] Dedicated Tx FIFOs mode
[    1.828573] dwc_otg: Microframe scheduler enabled
[    1.829001] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.835304] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.843925] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.850730] Init: Port Power? op_state=1
[    1.855995] Init: Power Port (0)
[    1.860568] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.868758] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.877365] usb usb1: Product: DWC OTG Controller
[    1.883458] usb usb1: Manufacturer: Linux 3.6.11+ dwc_otg_hcd
[    1.890548] usb usb1: SerialNumber: bcm2708_usb
[    1.897172] hub 1-0:1.0: USB hub found
[    1.902284] hub 1-0:1.0: 1 port detected
[    1.907854] dwc_otg: FIQ enabled
[    1.907870] dwc_otg: NAK holdoff enabled
[    1.907879] dwc_otg: FIQ split fix enabled
[    1.907898] Module dwc_common_port init
[    1.908111] Initializing USB Mass Storage driver...
[    1.914560] usbcore: registered new interface driver usb-storage
[    1.921869] USB Mass Storage support registered.
[    1.927929] usbcore: registered new interface driver libusual
[    1.935298] mousedev: PS/2 mouse device common for all mice
[    1.942843] bcm2835-cpufreq: min=700000 max=800000 cur=700000
[    1.949998] bcm2835-cpufreq: switching to governor powersave
[    1.956948] bcm2835-cpufreq: switching to governor powersave
[    1.963888] cpuidle: using governor ladder
[    1.969200] cpuidle: using governor menu
[    1.974378] sdhci: Secure Digital Host Controller Interface driver
[    1.981748] sdhci: Copyright(c) Pierre Ossman
[    1.987390] sdhci: Enable low-latency mode
[    2.032888] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
[    2.043318] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
[    2.052648] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.065441] usbcore: registered new interface driver usbhid
[    2.072331] usbhid: USB HID core driver
[    2.080166] TCP: cubic registered
[    2.086975] Initializing XFRM netlink socket
[    2.094697] NET: Registered protocol family 17
[    2.102872] Indeed it is in host mode hprt0 = 00021501
[    2.112821] Key type dns_resolver registered
[    2.122040] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    2.144034] registered taskstats version 1
[    2.173275] Waiting for root device /dev/mmcblk0p2...
[    2.182016] mmc0: read SD Status register (SSR) after 2 attempts
[    2.211263] mmc0: new high speed SDHC card at address e624
[    2.225510] mmcblk0: mmc0:e624 SU16G 14.8 GiB
[    2.233958]  mmcblk0: p1 p2
[    2.303443] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.314548] VFS: Mounted root (ext4 filesystem) on device 179:2.
[    2.330589] devtmpfs: mounted
[    2.335541] Freeing init memory: 128K
[    2.342779] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.350914] Indeed it is in host mode hprt0 = 00001101
[    2.563360] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.571693] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.581770] hub 1-1:1.0: USB hub found
[    2.588104] hub 1-1:1.0: 3 ports detected
[    2.873104] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.983495] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.991986] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.008769] smsc95xx v1.0.4
[    3.077704] smsc95xx 1-1.1:1.0: eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ec:5b:8d
[    3.192932] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    3.303655] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0201
[    3.312223] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.338664] usb 1-1.2: Product: USB 2.0 Hub [MTT]
[    3.350924] hub 1-1.2:1.0: USB hub found
[    3.366209] hub 1-1.2:1.0: 7 ports detected
[    3.463071] usb 1-1.3: new full-speed USB device number 5 using dwc_otg
[    3.583564] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0606
[    3.592049] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.601324] usb 1-1.3: Product: USB Hub 2.0
[    3.607073] usb 1-1.3: Manufacturer: ALCOR
[    3.623100] hub 1-1.3:1.0: USB hub found
[    3.629818] hub 1-1.3:1.0: 4 ports detected
[    3.722987] usb 1-1.2.1: new high-speed USB device number 6 using dwc_otg
[    3.833608] usb 1-1.2.1: New USB device found, idVendor=1a40, idProduct=0101
[    3.842924] usb 1-1.2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.853269] usb 1-1.2.1: Product: USB 2.0 Hub
[    3.860495] hub 1-1.2.1:1.0: USB hub found
[    3.866901] hub 1-1.2.1:1.0: 4 ports detected
[    3.953014] usb 1-1.2.5: new high-speed USB device number 7 using dwc_otg
[    4.077893] usb 1-1.2.5: New USB device found, idVendor=0403, idProduct=6014
[    4.092804] usb 1-1.2.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.115450] usb 1-1.2.5: Product: BitFORCE SHA256 SC
[    4.121919] usb 1-1.2.5: Manufacturer: FTDI
[    4.131878] usb 1-1.2.5: SerialNumber: FTWOX3DB
[    4.223052] usb 1-1.2.6: new high-speed USB device number 8 using dwc_otg
[    4.337599] usb 1-1.2.6: New USB device found, idVendor=0403, idProduct=6014
[    4.352725] usb 1-1.2.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.372744] usb 1-1.2.6: Product: BitFORCE SHA256 SC
[    4.379227] usb 1-1.2.6: Manufacturer: FTDI
[    4.402716] usb 1-1.2.6: SerialNumber: FTWOTX4Q
[    4.492949] usb 1-1.2.7: new high-speed USB device number 9 using dwc_otg
[    4.617959] usb 1-1.2.7: New USB device found, idVendor=0403, idProduct=6014
[    4.642147] usb 1-1.2.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.656886] usb 1-1.2.7: Product: BitFORCE SHA256 SC
[    4.670836] usb 1-1.2.7: Manufacturer: FTDI
[    4.676650] usb 1-1.2.7: SerialNumber: FTWPOD7D
[    4.773463] usb 1-1.3.1: new full-speed USB device number 10 using dwc_otg
[    4.894718] usb 1-1.3.1: not running at top speed; connect to a high speed hub
[    4.919491] usb 1-1.3.1: New USB device found, idVendor=0403, idProduct=6014
[    4.942814] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    4.962366] usb 1-1.3.1: Product: BitFORCE SHA256 SC
[    4.969587] usb 1-1.3.1: Manufacturer: FTDI
[    4.982833] usb 1-1.3.1: SerialNumber: FTWOTWVJ
[    5.083507] usb 1-1.3.2: new full-speed USB device number 11 using dwc_otg
[    5.204765] usb 1-1.3.2: not running at top speed; connect to a high speed hub
[    5.231538] usb 1-1.3.2: New USB device found, idVendor=0403, idProduct=6014
[    5.250398] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    5.272820] usb 1-1.3.2: Product: BitFORCE SHA256 SC
[    5.279287] usb 1-1.3.2: Manufacturer: FTDI
[    5.292828] usb 1-1.3.2: SerialNumber: FTWPJB22
[    5.393556] usb 1-1.3.3: new full-speed USB device number 12 using dwc_otg
[    5.523575] usb 1-1.3.3: New USB device found, idVendor=05e3, idProduct=0606
[    5.532098] usb 1-1.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.560996] usb 1-1.3.3: Product: USB Hub 2.0
[    5.572809] usb 1-1.3.3: Manufacturer: ALCOR
[    5.584063] hub 1-1.3.3:1.0: USB hub found
[    5.600907] hub 1-1.3.3:1.0: 4 ports detected
[    5.693586] usb 1-1.3.4: new full-speed USB device number 13 using dwc_otg
[    5.823666] usb 1-1.3.4: New USB device found, idVendor=05e3, idProduct=0606
[    5.832235] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.843716] usb 1-1.3.4: Product: USB Hub 2.0
[    5.849810] usb 1-1.3.4: Manufacturer: ALCOR
[    5.859080] hub 1-1.3.4:1.0: USB hub found
[    5.865857] hub 1-1.3.4:1.0: 4 ports detected
[    5.923572] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    5.963629] usb 1-1.3.3.1: new full-speed USB device number 14 using dwc_otg
[    6.074860] usb 1-1.3.3.1: not running at top speed; connect to a high speed hub
[    6.094259] usb 1-1.3.3.1: New USB device found, idVendor=0403, idProduct=6014
[    6.103077] usb 1-1.3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.114352] usb 1-1.3.3.1: Product: BitFORCE SHA256 SC
[    6.121083] usb 1-1.3.3.1: Manufacturer: FTDI
[    6.127025] usb 1-1.3.3.1: SerialNumber: FTWPGBVL
[    6.213662] usb 1-1.3.3.2: new full-speed USB device number 15 using dwc_otg
[    6.313698] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    6.324921] usb 1-1.3.3.2: not running at top speed; connect to a high speed hub
[    6.348697] usb 1-1.3.3.2: New USB device found, idVendor=0403, idProduct=6014
[    6.365291] usb 1-1.3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.378453] usb 1-1.3.3.2: Product: BitFORCE SHA256 SC
[    6.385798] usb 1-1.3.3.2: Manufacturer: FTDI
[    6.391834] usb 1-1.3.3.2: SerialNumber: FTWPJA1X
[   15.319905] bcm2835-cpufreq: switching to governor ondemand
[   15.319933] bcm2835-cpufreq: switching to governor ondemand
[   17.610317] Adding 102396k swap on /var/swap.  Priority:-1 extents:1 across:102396k SS
[   17.830593] smsc95xx 1-1.1:1.0: eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[17453.926998] usb 1-1.3.3.1: USB disconnect, device number 14
[17453.927669] usb 1-1.3.3.2: USB disconnect, device number 15
[17454.000865] usb 1-1.3.3: reset full-speed USB device number 12 using dwc_otg
[17454.410879] usb 1-1.3.3.1: new full-speed USB device number 16 using dwc_otg
[17454.512125] usb 1-1.3.3.1: not running at top speed; connect to a high speed hub
[17454.521143] usb 1-1.3.3.1: New USB device found, idVendor=0403, idProduct=6014
[17454.521174] usb 1-1.3.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17454.521189] usb 1-1.3.3.1: Product: BitFORCE SHA256 SC
[17454.521202] usb 1-1.3.3.1: Manufacturer: FTDI
[17454.521213] usb 1-1.3.3.1: SerialNumber: FTWPGBVL
[17454.600907] usb 1-1.3.3.2: new full-speed USB device number 17 using dwc_otg
[17454.702232] usb 1-1.3.3.2: not running at top speed; connect to a high speed hub
[17454.711208] usb 1-1.3.3.2: New USB device found, idVendor=0403, idProduct=6014
[17454.711237] usb 1-1.3.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[17454.711250] usb 1-1.3.3.2: Product: BitFORCE SHA256 SC
[17454.711262] usb 1-1.3.3.2: Manufacturer: FTDI
[17454.711274] usb 1-1.3.3.2: SerialNumber: FTWPJA1X

Raspian 7 "Wheezy" is the OS and they are attached to powered usb hubs the 2 that failed are on different hubs and none of the other devices on those hubs failed. I can run 3.3.4 for days with no issues. 3.4.2 zombies within hours.

Which OS

Slow to happen problems with USB on RPi are usualy either cable or OS issues.
Look at dmesg and see what happened when they went zombie - most likely the OS.
zombie means the device failed (error -4, -9, -99) but there can be a dmesg saying the OS failed on it also on the RPi

Running 7 Single SC's on a Raspberry pi. I have to use 3.3.4, because 3.4.1 would crash out with no warnings. 3.4.2 made it better but 2 of the singles will go Zombie over the course of a few hours and it says they are detected but something about them being (incorrect device?).

I see mswsock and I think network card. Maybe you can find the drivers for your network card and go through and repair or reinstall the device. You could have overridden something accidentally when you were trying to clear out your devices.

From the debug instance of CGM, regarding that DLL error Xian and myself were getting:

Can I at least mention this program since it came up on google and looked like what would be good for multiple device removal. I hope this helps you with your purge. Just make sure you don't remove any devices you need.

Page describing http://www.thewindowsclub.com/manage-remove-devices-drivers-with-device-remover
Pages for software http://www.pro-it-education.de/software/deviceremover/

I've already done that, also it's a bit too late for a system restore now.

delete the com ports from the device manager. windows will "rediscover" them as you plug the erupters in.

make a system restore point 1st though. just in case.

I've restarted many times to get this working, So what your saying is to reinstall the VCP C210 drivers then WinUSB? This all started when one of my AMU's stopped spitting out accepts in BFGminer, I noticed it kept assigning that one AMU to COM3 no matter what and that I had like 50 com ports assigned., but I've only got 7 BE's plugged in at once..Ugh. Windows can be such a pain at times. Like I said, I'd just love to just wipe all the Com ports/drivers out clean and start anew.

I'm hoping you don't have too many but maybe installing one of the other drivers and then to winUSB again. I uninstalled my humble single eroupter at least once from the device manager and uninstall drivers a well but I still felt I needed to start with the cp210 drivers.

I thought that once you have have the first setup they'd use the same driver so just clear out the others except one and go from there.

All else fails have you restarted recently?

Well crap, I think messing around with too many com ports and switching from BFGminer to CGminer I messed up my drivers. I've tried uninstalling the VCP CP210 and reinstalling WinUSB via zadig, but only one AMU on my hub shows up. Is there any way to just wipe all of the drivers clean and start out from scratch? I'm on W7 64bit.

So if I'm using the noGPU version it would be cgminer-nogpu.exe -c ?

cgminer -c

Just happen to find the config file that cgminer made. It was in plain site. My question now is what is the trigger to use the config file?

I seem to remember that it used to do this, but its been some time since I used a config file. In the past I would just have the same config file and I would just copy and past to systems as I needed.  All you need to do is make sure it is formatted correctly, save it in the same folder as cgminer.exe and make sure the extension is .conf.  Then when you create your shortcut or .bat file, you need to tell it to use the .conf file in your argument.

I was more asking how you get to the config file and use it for other devices. It says its in a hidden folder but in windows I have all hidden folders to be set to be seen. I want to when I get more devices transplant them into something like a raspberry pi .

Not quite sure what you are asking. If you are using Windows, the Windows downloads from ckolivas git already come configured I believe to recognize USB devices, as well as scrypt mining, there shouldnt be anything more you need to do but to make sure your command line has the correct arguments.

What page do I look into to make and use a config file. I have no idea why you would not need and I do need admin, but since I have a build version all that should be recognized without the icaris options?

I just know it works with the options in the string on admin mode for cgminer.

That's not what I saw either.

I plugged my first 4 into my hub, and fired up cgminer.  Found them without a problem.

While it was running, I added another 2.  They showed up and started mining away.

I then plugged a hub in with another 10.  That was too much, I guess it saw them before windows gave them the right USB driver.  It crashed.  I restarted cgminer, as was well.

I then plugged in another hub with another 10.  That worked flawlessly, no crashing.

M