come on all you 0 post count fan boys. defend these assholes! i want you, or anyone for that matter, to call me out and tell me i am lying!
ANYONE!? ANYONE?!
i challenge someone to tell me what i am stating in regards to AMT is not true.
i challenge anyone to tell me anything AMT has said to be true.
WHERE ARE YOU FAN BOYS?
where are YOU ZIPKIN? tell me im a liar? i dare you!!!!
Topic: Official Thread: AMT - page 73. (Read 678353 times)
at first you said your boards will not be daisy chained and now you are saying something totally different. you seem to do this frequently. eg. you say you will mail/wire a refund but then do something totally different. i see a pattern emerging.
DON'T YOU?
MAYBE I SHOULD SUE YOU FOR LYING? WHAT DO YOU THINK?
DON'T YOU?
MAYBE I SHOULD SUE YOU FOR LYING? WHAT DO YOU THINK?
Also,
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
Hmmm.... then the 8 coincraft a1 board appears to be someone else's design (bitmine.ch).
Bitminedesign + a crapy copy of marto's design as long as I see it
Probably he got all from bitmine nd now he is assembling at full sped.but main question is is this stuff working
Amt is famous with microchip programing skils having in mind their deep bitfury experience
It's a new internal design of AMT. AMT designs and creates boards now. And the boards is controlled by micro controllers, there is no daisy chain likes martins board. Each chip communicates with a different micro controller and komsho, is an original design.
It's our design and we created it. Support us and you may receive a prodarak.
hmmm... another lie by AMT? The current daisy chain you said will not exist on these boards? looks like ill make that lie number 13 zipkin.
Craig, you didn't notice the microchips next to each A1 chip? There is no daisy chain on this board.
im quoting you, not looking at pictures.
You're not quoting us correctly than.
Also,
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
Hmmm.... then the 8 coincraft a1 board appears to be someone else's design (bitmine.ch).
Bitminedesign + a crapy copy of marto's design as long as I see it
Probably he got all from bitmine nd now he is assembling at full sped.but main question is is this stuff working
Amt is famous with microchip programing skils having in mind their deep bitfury experience
It's a new internal design of AMT. AMT designs and creates boards now. And the boards is controlled by micro controllers, there is no daisy chain likes martins board. Each chip communicates with a different micro controller and komsho, is an original design.
It's our design and we created it. Support us and you may receive a prodarak.
hmmm... another lie by AMT? The current daisy chain you said will not exist on these boards? looks like ill make that lie number 13 zipkin.
Craig, you didn't notice the microchips next to each A1 chip? There is no daisy chain on this board.
im quoting you, not looking at pictures.
Also,
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
Hmmm.... then the 8 coincraft a1 board appears to be someone else's design (bitmine.ch).
Bitminedesign + a crapy copy of marto's design as long as I see it
Probably he got all from bitmine nd now he is assembling at full sped.but main question is is this stuff working
Amt is famous with microchip programing skils having in mind their deep bitfury experience
It's a new internal design of AMT. AMT designs and creates boards now. And the boards is controlled by micro controllers, there is no daisy chain likes martins board. Each chip communicates with a different micro controller and komsho, is an original design.
It's our design and we created it. Support us and you may receive a prodarak.
hmmm... another lie by AMT? The current daisy chain you said will not exist on these boards? looks like ill make that lie number 13 zipkin.
Craig, you didn't notice the microchips next to each A1 chip? There is no daisy chain on this board.
The lies keep piling up. Zipkin said his boards were not going to be daisy chained "like martins". He then today says the boards are daisy chained. i mean what is it? he has told so many lies and convoluted truths he cant get his story straight.
I've read through this whole forum, and it seems like they actually build miners, actually exist and are being harassed by people that are not even clients!? WTF.. And instead of helping them which they seemed to have asked for help several times, you harass them on a forum and hurt their sales, and threaten to sue them so they cant afford production?
You people are honestly very sick. And it seems to be the same on other companies threads as well. Yes everyone in the industry is late, but as a new buyer, I see that in America I can only buy from Cointerra or AMT and AMT (according this to thread) is delivering actually.
Here we go again... another 0 post count fan boy of AMT's. Let me help you out kiddo.
sit back.
listen and pay attention.
stfu.
no one wants to hear your opinions.
you don't know shit.
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. ANYMORE?
AMT IS RUN BY A CROOK CALLED JOSHUA ZIPKIN. IF YOU PURCHASE A MINER FROM THESE GUYS YOU DESERVE EVERYTHING YOU HAVE COMING TO YOU.
You people are honestly very sick. And it seems to be the same on other companies threads as well. Yes everyone in the industry is late, but as a new buyer, I see that in America I can only buy from Cointerra or AMT and AMT (according this to thread) is delivering actually.
Here we go again... another 0 post count fan boy of AMT's. Let me help you out kiddo.
sit back.
listen and pay attention.
stfu.
no one wants to hear your opinions.
you don't know shit.
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. ANYMORE?
AMT IS RUN BY A CROOK CALLED JOSHUA ZIPKIN. IF YOU PURCHASE A MINER FROM THESE GUYS YOU DESERVE EVERYTHING YOU HAVE COMING TO YOU.
Criag, we're suing you. Just a heads up.
You're in trouble now, Craig. I tried to warn you, but noooooooo, you had to push the Zipper.
"I'm suing your ass, Craig! BTW, nice beard."
im going to keep updating this list with lies from AMT.
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. zipkin lies about the board not being daisy chained (like martins)
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. zipkin lies about the board not being daisy chained (like martins)
accepting all personal stories where josh/AMT has lied to add to my running list.
We've shipped up to the 1200's - a few hundred thus far, earlier batches when clients agreed to take the risk and receive their miner despite heat/pcb problems.
AMT, could you clarify this for the group. How is it you are up to the 1200's when the 500's - 700's are still waiting. maybe the question needs to be more specific.
Approximately how many coincraft machines have shipped and what number range shipped out last week (of coincraft machines)
We have clarified this point, but it'll be faster to type it rather than search through the crap in thread. Over the last three weeks we have had several clients who have heard of our delays and have opted to receive miners even with the possible troubles. A few (3 or 4) of these clients where chip buyers as well and in turn happened to working with, or doing something from a board/pcb level. We explained the problem with the cage and we explained the problems with the boards and they opted to receive their miners anyway. We had them sign a waiver which stated they know the miners are beta condition and they wish to receive them anyway, waiving any RMA rights and what nut.
A few of them overclocked them and had troubles, others got it to work and gave us their advice. In total these were 36 clients and 140-some miners that went. Of the 140 some 8 of them were full miners in cases. The clients that opted to receive their miners with possible defects were mostly technically oriented individuals. Each order ranged from 1 to 22 miners. 22 behind the most of course. Some of those orders were in the 600's, 700's, 900's, and even 4 of them were in the 1200's.
We have not shipped all the way to 1200 of course, but after this upcoming we should see a substantial increase in the amount of miner testimonials posted on this thread.
To keep things simpler why not just edit the original post with where things are at. Put UPDATE X/X/2013: We are shipping orders X-X this week. Expect email with tracking info or for pick up.
Something along those lines would help ALOT more than keeping up with what will be 250+ pages of just complaints.
If there are delays post them there too. Seems to work for others. Also if you got orders that are low hanging fruit so to speak particularly in this forum get those out the door. For your own benefit so the feedback here turns into the hardware not about whatever club you are a part of or coffee you drink. Just sayin. You already admitted you don't ship according to the queue system so just do it in a way that simply gets the simplest orders out of the way to leave you room to handle any more complicated ones. It kinda sucks but its better than more of the mess this thread has turned into.
TECHNICAL(ish) QUESTION
Have the issues been resolved that you have with the chips? or are there still pending problems to expect? Will we be getting fixed versions of the hardware?
nvm you posted about the same time I did question answered.
Which chip issues? There has never really been a chip issue thus far. board issues yes, but chip issues no. The A1 is a good chip.
what a mangled web we weave huh zipkin?
A client which sympathizes with our situation on this thread made some high def photos of his 1.2Th, we thank for his help.
Guys,
Just wondering does the whole unit shutdown on overheat, before things burn out, just thinking of single fan on top if it fails what happens? I hate for it to become a really expensive brick?
What's the wattage on this?
1.12 w per ghs in turbo
I've read through this whole forum, and it seems like they actually build miners, actually exist and are being harassed by people that are not even clients!? WTF.. And instead of helping them which they seemed to have asked for help several times, you harass them on a forum and hurt their sales, and threaten to sue them so they cant afford production?
You people are honestly very sick. And it seems to be the same on other companies threads as well. Yes everyone in the industry is late, but as a new buyer, I see that in America I can only buy from Cointerra or AMT and AMT (according this to thread) is delivering actually.
You may not believe this, but I truly didn't know that this dude's moniker is ChristOnBaord when I posted about the Noah shit. I now have proof that this is Josh. Notice how Board is spelled. They only teach that at Penn State if you attend not 4, not 6, but now learnt 7 years (2002-2009).
ChristOnBaord you are a fuckin' idiot!
im going to keep updating this list with lies from AMT.
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. zipkin lies about the board not being daisy chained (like martins)
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. zipkin lies about the board not being daisy chained (like martins)
Also,
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
A heads up for technical bullies and tech enthusiasts in this thread. We've created our own board as well, and no daisy chain is needed for this bad boy.
This board will ship in the 2.4's and 3.2's.
- AMT
Hmmm.... then the 8 coincraft a1 board appears to be someone else's design (bitmine.ch).
Bitminedesign + a crapy copy of marto's design as long as I see it
Probably he got all from bitmine nd now he is assembling at full sped.but main question is is this stuff working
Amt is famous with microchip programing skils having in mind their deep bitfury experience
It's a new internal design of AMT. AMT designs and creates boards now. And the boards is controlled by micro controllers, there is no daisy chain likes martins board. Each chip communicates with a different micro controller and komsho, is an original design.
It's our design and we created it. Support us and you may receive a prodarak.
hmmm... another lie by AMT? The current daisy chain you said will not exist on these boards? looks like ill make that lie number 13 zipkin.
We've shipped up to the 1200's - a few hundred thus far, earlier batches when clients agreed to take the risk and receive their miner despite heat/pcb problems.
AMT, could you clarify this for the group. How is it you are up to the 1200's when the 500's - 700's are still waiting. maybe the question needs to be more specific.
Approximately how many coincraft machines have shipped and what number range shipped out last week (of coincraft machines)
We have clarified this point, but it'll be faster to type it rather than search through the crap in thread. Over the last three weeks we have had several clients who have heard of our delays and have opted to receive miners even with the possible troubles. A few (3 or 4) of these clients where chip buyers as well and in turn happened to working with, or doing something from a board/pcb level. We explained the problem with the cage and we explained the problems with the boards and they opted to receive their miners anyway. We had them sign a waiver which stated they know the miners are beta condition and they wish to receive them anyway, waiving any RMA rights and what nut.
A few of them overclocked them and had troubles, others got it to work and gave us their advice. In total these were 36 clients and 140-some miners that went. Of the 140 some 8 of them were full miners in cases. The clients that opted to receive their miners with possible defects were mostly technically oriented individuals. Each order ranged from 1 to 22 miners. 22 behind the most of course. Some of those orders were in the 600's, 700's, 900's, and even 4 of them were in the 1200's.
We have not shipped all the way to 1200 of course, but after this upcoming we should see a substantial increase in the amount of miner testimonials posted on this thread.
To keep things simpler why not just edit the original post with where things are at. Put UPDATE X/X/2013: We are shipping orders X-X this week. Expect email with tracking info or for pick up.
Something along those lines would help ALOT more than keeping up with what will be 250+ pages of just complaints.
If there are delays post them there too. Seems to work for others. Also if you got orders that are low hanging fruit so to speak particularly in this forum get those out the door. For your own benefit so the feedback here turns into the hardware not about whatever club you are a part of or coffee you drink. Just sayin. You already admitted you don't ship according to the queue system so just do it in a way that simply gets the simplest orders out of the way to leave you room to handle any more complicated ones. It kinda sucks but its better than more of the mess this thread has turned into.
TECHNICAL(ish) QUESTION
Have the issues been resolved that you have with the chips? or are there still pending problems to expect? Will we be getting fixed versions of the hardware?
nvm you posted about the same time I did question answered.
"(1) 1 in every 8 coincraft A1 chips are claimed to be defective. Which should not be an issue since you should be able to test a chip before you mount in on the board!"
Not that easy with power BGA devices which pull most of their heat away through the bottom contact balls. The usual ZIF test sockets cannot be used because they are not designed to pull away the heat from full power testing and ya can't just slap a cold-plate on top of the chip but - that is an issue between BM.ch/CoinCraft and Global Foundries who make the chip. Obviously GF was told to not test the chips under load (more expensive), just do limited go/no-go.
Then again, considering it typically cost 50-100million USD to bring a 28nm node chip into production, one would think that maybe 5% more to cover 100% full load burn-in would not have been a bad idea...
Not that easy with power BGA devices which pull most of their heat away through the bottom contact balls. The usual ZIF test sockets cannot be used because they are not designed to pull away the heat from full power testing and ya can't just slap a cold-plate on top of the chip but - that is an issue between BM.ch/CoinCraft and Global Foundries who make the chip. Obviously GF was told to not test the chips under load (more expensive), just do limited go/no-go.
Then again, considering it typically cost 50-100million USD to bring a 28nm node chip into production, one would think that maybe 5% more to cover 100% full load burn-in would not have been a bad idea...
You are correct there, there really is not something we can do there. Also trying to re solder a pre-mounted chip is a pain in the ass, and expensive because it needs to be done by hand. At $65 for removal - replacement, its better to just get more chips.
Also we found out earlier on that the 1 out of 8 chips is not a bad chip, but more just a weak link, and this has a direct link to the amount of voltage passed to the weaker chip, it needs a stronger current, and if the current could be modified on a chip by chip basis, than essentially we could get the most of that chip.
The current daisy chain design does not allow for that, and actually if one chip goes in the line, they all go and you'll get a error message of "No A1 Chipchain Detected."
It really comes down to the board design.
im going to keep updating this list with lies from AMT.
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. ?
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. zipkin lied about saying he was going to ship my miner as "punishment" for calling him out on this website and amazon.com
12. they lied about the wattage
13. ?
A client which sympathizes with our situation on this thread made some high def photos of his 1.2Th, we thank for his help.
Guys,
Just wondering does the whole unit shutdown on overheat, before things burn out, just thinking of single fan on top if it fails what happens? I hate for it to become a really expensive brick?
What's the wattage on this?
1.12 w per ghs in turbo
I've read through this whole forum, and it seems like they actually build miners, actually exist and are being harassed by people that are not even clients!? WTF.. And instead of helping them which they seemed to have asked for help several times, you harass them on a forum and hurt their sales, and threaten to sue them so they cant afford production?
You people are honestly very sick. And it seems to be the same on other companies threads as well. Yes everyone in the industry is late, but as a new buyer, I see that in America I can only buy from Cointerra or AMT and AMT (according this to thread) is delivering actually.
Look, guys. The Newbie read the entire forum, all 2 million posts prior to commenting in AMT's thread. Fucking amazing! And, to think I walked past Ripley's Believe or Not Museum yesterday in Baltimore, MD.
Hey, Newbie. Why don't you buy some of these magic miners.
Notice how it hashes and make bitcoins without even having to be plugged in. Are you ready for the funny part, Newbie? If I'm not mistaken, that miner depicted above is in the trunk of my car. By my calculations, I should have mega bitcoins by morning. I may have to dump them on the side of the road to lighten the car some due to all the weight. It also acts as a magic oven and spits out upside down pineapple cake.
For what it's worth, at least I earned a ZSP coin. What's that you ask? Nothing really, but each time a Zipkin Sock Puppet is spotted, the person who claims such first is credited with 1 ZSP. What are they worth, you ask? The same amount as the truth that Joshua Zipkin says. Thus, in reality, a ZSP has more value.
Oddly, I can't believe you didn't spot any during your reading of the entire forum--all 2 million posts. You are one amazing dude. I'm willing to bet that for light reading you read War and Peace and The Bible. I bet further that you can recite the passage about who killed Jesus.
Noah, the movie, is out. Go see it and express on some forum how it can't be true because in the Bible Noah never uttered a single word, but there on the big screen is Russell Crowe playing Noah talking his ass off.
SOB! That fuckin' miner does better plugged in.
Thankyou for the updates.
I've read through this whole forum, and it seems like they actually build miners, actually exist and are being harassed by people that are not even clients!? WTF.. And instead of helping them which they seemed to have asked for help several times, you harass them on a forum and hurt their sales, and threaten to sue them so they cant afford production?
You people are honestly very sick. And it seems to be the same on other companies threads as well. Yes everyone in the industry is late, but as a new buyer, I see that in America I can only buy from Cointerra or AMT and AMT (according this to thread) is delivering actually.
Here we go again... another 0 post count fan boy of AMT's. Let me help you out kiddo.
sit back.
listen and pay attention.
stfu.
no one wants to hear your opinions.
you don't know shit.
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. ANYMORE?
AMT IS RUN BY A CROOK CALLED JOSHUA ZIPKIN. IF YOU PURCHASE A MINER FROM THESE GUYS YOU DESERVE EVERYTHING YOU HAVE COMING TO YOU.
You people are honestly very sick. And it seems to be the same on other companies threads as well. Yes everyone in the industry is late, but as a new buyer, I see that in America I can only buy from Cointerra or AMT and AMT (according this to thread) is delivering actually.
Here we go again... another 0 post count fan boy of AMT's. Let me help you out kiddo.
sit back.
listen and pay attention.
stfu.
no one wants to hear your opinions.
you don't know shit.
HERE ARE THE ITEMS AMT HAS LIED ABOUT.
1. they lied about my initial delivery date
2. the lied about updating this thread every week
3. they lied about keeping an order queue
4. they lied about mailing me a refund
5. they lied about wiring me a refund
6. they have lied about saying they would hire people from this forum (twice)
7. they lied about something as dumb as being associated with Freemasons
8. they lied about my second delivery date
9. they lied about being able to pay with credit cards on their website
10. THEY LIED ABOUT PAYING BRUNO 20btc
11. ANYMORE?
AMT IS RUN BY A CROOK CALLED JOSHUA ZIPKIN. IF YOU PURCHASE A MINER FROM THESE GUYS YOU DESERVE EVERYTHING YOU HAVE COMING TO YOU.
Criag, we're suing you. Just a heads up.
bring it on tubby. you name an instance where i lied and i might be afraid. until then stfu zipkin no one believes you.
ohh yeah... where is my refund "glamour shot" boy?
We've shipped up to the 1200's - a few hundred thus far, earlier batches when clients agreed to take the risk and receive their miner despite heat/pcb problems.
AMT, could you clarify this for the group. How is it you are up to the 1200's when the 500's - 700's are still waiting. maybe the question needs to be more specific.
Approximately how many coincraft machines have shipped and what number range shipped out last week (of coincraft machines)
We have clarified this point, but it'll be faster to type it rather than search through the crap in thread. Over the last three weeks we have had several clients who have heard of our delays and have opted to receive miners even with the possible troubles. A few (3 or 4) of these clients where chip buyers as well and in turn happened to working with, or doing something from a board/pcb level. We explained the problem with the cage and we explained the problems with the boards and they opted to receive their miners anyway. We had them sign a waiver which stated they know the miners are beta condition and they wish to receive them anyway, waiving any RMA rights and what nut.
A few of them overclocked them and had troubles, others got it to work and gave us their advice. In total these were 36 clients and 140-some miners that went. Of the 140 some 8 of them were full miners in cases. The clients that opted to receive their miners with possible defects were mostly technically oriented individuals. Each order ranged from 1 to 22 miners. 22 behind the most of course. Some of those orders were in the 600's, 700's, 900's, and even 4 of them were in the 1200's.
We have not shipped all the way to 1200 of course, but after this upcoming we should see a substantial increase in the amount of miner testimonials posted on this thread.
Thanks for clearing that up.
I do appreciate the information and your participation here and understand your frustration as I hope you understand ours.
We understand your frustration and share it. Please know that what ever profit we thought we had made went into the same investment you guys made as well. And we are in the same boat you're all in, and we doing what ever we can to speed this up. We will try and be much more transparent about issues and shipments and everything else.
Jump to: