Topic: OFFICIAL: ✔✔✔✔✔✔✔✔✔✔ VIRTUALCOIN (VC) ✔✔✔✔✔✔✔✔✔ | RANKED TOP 10 | v16.1.2(today) - page 7. (Read 102008 times)

Quote from: pushkarmore on April 21, 2017, 12:37:17 AM

Quote from: pushkarmore on April 21, 2017, 12:14:51 AM

Quote from: pushkarmore on April 20, 2017, 10:59:50 PM

Quote from: v.coinz on April 21, 2017, 11:56:25 AM

Run installer of 15.1.4 & then replace exe with the new version.

Always make backup of your wallet.dat file. just copy it somewhere safe just in case.

okay.. i only replaced the qt exe file in appdata with this new 20MB file that I downloaded.
havent run the installer. but when I opened this new file, all looks fine.. :-)

how do i know, its done correctly?

1. Backup your wallet.dat file which has coins.
2. Run 15.1.4 Installer
3. Replace exe file with new file.
4. Launch
5. (optional) if you do not see your coins, close wallet & copy your backup wallet.dat to appdata folder.

Should be straight forward.

got it.. seems alright,.. all coins in place..

OKAY heres an issue that I see now..

Address:
VKxy6HuABSU6MxRtwcAYUDWSmTTbUCXFSN

Explorer:
Total Sent (VC) Total Received (VC) Balance (VC)
2431.32986048 7608.17101240 5176.84115192

Wallet:
Balance (VC): 5392.62845758

Why is a difference of 215 VC? These numbers should tally right?

the last transaction at both wallet and explorer are both the same. no problem there. just the balances are incorrect.

It is expected as Maturity change from 2000 to 20.

Did you solo mine in the last 1-2 weeks?

I will investigate further as well.

No solo mining.. only with theminingpool

I have PM. But meanwhile here is another way to confirm your balance.

In Wallet
Settings -> Option -> Experts Only (enable it)

Send -> "Inputs..."
you will get screen like one below.
Select "List mode"

Your balance should be sum of all those
if you click on "(un)select all"
You will see your total, it should match your balance on your main window.

Now right click on each VC address & copy the address.
Paste in the block explorer & confirm balance.

if any does not match, post that VC address with balance you see in your wallet screen.

Mate, the balance the wallet is still more than what it shows in the explorer.

I tried the inputs way, it shows the same balance as in the home screen (more than the exp).
There are 3 addresses one that is there in this thread and 2 others for change (less than 0.5 VC).

You have a new wallet version i think, so should I update the wallet again now?

thanks

Let's get to the bottom.
Post the screenshot similar to above of your wallet but select list mode.
Thanks

TheMiningPool.mine

sr. member

Activity: 644

Merit: 250

Pool updated now.
All working .
Can start mining now.
Ty Dev.

"version" : 16010200,
"protocolversion" : 70030,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 21337,
"timeoffset" : 0,
"connections" : 2,
"proxy" : "",
"difficulty" : 199.99952316,
"testnet" : false,
"keypoololdest" : 1492809172,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""

pushkarmore

full member

Activity: 241

Merit: 100

Quote from: ?? on ??

Hi all,
Couple of things :

1- MiningPool VC wallet Updated.

"version" : 16010200,
"protocolversion" : 70030,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 20777,
"timeoffset" : 0,
"connections" : 0,
"proxy" : "",
"difficulty" : 352.56824630,
"testnet" : false,
"keypoololdest" : 1492804087,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""

So ppl can start mining again now with new 20 blocks maturation time.

2- With new wallet update, all pending coins in old Pool Wallet get insta-matured and are all available now.
So, as I promised, here is the link to the excel sheet with pending/lost VC coins I have :

https://docs.google.com/spreadsheets/d/1GKYztT7QpGwflGAC4eFwVWLTJdX27fIbr2XgTzj-qaE/edit?usp=sharing

So please, check your wallets and tell me if you are ok with that info.
I know you will "loose" some coins, but I already explained there were lost payments and lost mining blocks becouse of the fork.
As soon as I get your confirmation I will send pending coins.
If anyone is missing there, please send me a PM and I will check old redis database and add you to the list.

I dont want to keep this coins for more time, so I will wait 24h more if someone else wants to be included in the list.

Regards,
TheMiningPool

I am good with the working.. please proceed..

Appreciate your support..

Thanks..
Pushkar

pushkarmore

full member

Activity: 241

Merit: 100

Quote from: pushkarmore on April 21, 2017, 01:08:42 AM

Quote from: pushkarmore on April 21, 2017, 12:37:17 AM

Quote from: pushkarmore on April 21, 2017, 12:14:51 AM

Quote from: pushkarmore on April 20, 2017, 10:59:50 PM

Quote from: v.coinz on April 21, 2017, 06:57:48 PM

Run installer of 15.1.4 & then replace exe with the new version.

Always make backup of your wallet.dat file. just copy it somewhere safe just in case.

okay.. i only replaced the qt exe file in appdata with this new 20MB file that I downloaded.
havent run the installer. but when I opened this new file, all looks fine.. :-)

how do i know, its done correctly?

1. Backup your wallet.dat file which has coins.
2. Run 15.1.4 Installer
3. Replace exe file with new file.
4. Launch
5. (optional) if you do not see your coins, close wallet & copy your backup wallet.dat to appdata folder.

Should be straight forward.

got it.. seems alright,.. all coins in place..

OKAY heres an issue that I see now..

Address:
VKxy6HuABSU6MxRtwcAYUDWSmTTbUCXFSN

Explorer:
Total Sent (VC) Total Received (VC) Balance (VC)
2431.32986048 7608.17101240 5176.84115192

Wallet:
Balance (VC): 5392.62845758

Why is a difference of 215 VC? These numbers should tally right?

the last transaction at both wallet and explorer are both the same. no problem there. just the balances are incorrect.

It is expected as Maturity change from 2000 to 20.

Did you solo mine in the last 1-2 weeks?

I will investigate further as well.

No solo mining.. only with theminingpool

I have PM. But meanwhile here is another way to confirm your balance.

In Wallet
Settings -> Option -> Experts Only (enable it)

Send -> "Inputs..."
you will get screen like one below.
Select "List mode"

Your balance should be sum of all those
if you click on "(un)select all"
You will see your total, it should match your balance on your main window.

Now right click on each VC address & copy the address.
Paste in the block explorer & confirm balance.

if any does not match, post that VC address with balance you see in your wallet screen.

Mate, the balance the wallet is still more than what it shows in the explorer.

I tried the inputs way, it shows the same balance as in the home screen (more than the exp).
There are 3 addresses one that is there in this thread and 2 others for change (less than 0.5 VC).

You have a new wallet version i think, so should I update the wallet again now?

thanks

v.coinz

hero member

Activity: 882

Merit: 515

SuperNode is Updated as well.

v.coinz

hero member

Activity: 882

Merit: 515

Linux 32bit & 64bit wallets updated as well. (use above links)

v.coinz

hero member

Activity: 882

Merit: 515

VERSION 16.1.2 RELEASED (April 20th 2017)

Total 293 changes were implemented in this version.
10% inflation added, reward drops 10% every 17500 blocks.
Maturity: 20

For Linux users, Pool, Explorer & Exchange use
https://github.com/vcoin-z/virtualcoin.git

WINDOWS WALLET:
http://download.virtualcoin.ca/virtualcoin-qt.exe

Go to

Code:

%APPDATA%\VirtualCoin\

Replace with this new file.

LINUX WALLET (32bit OS):
http://download.virtualcoin.ca/virtualcoind-32

LINUX WALLET (64bit OS):
http://download.virtualcoin.ca/virtualcoind-64

Steps:
git clone https://github.com/vcoin-z/virtualcoin.git
cd virtualcoin/src/leveldb
sudo rm libleveldb.a
sudo rm libmemenv.a
sudo chmod 775 build_detect_platform
cd ..
sudo make -f makefile.unix clean
cd leveldb
sudo make libleveldb.a libmemenv.a
cd ..
sudo make -f makefile.unix USE_UPNP=1 USE_QRCODE=-
sudo strip virtualcoind
./virtualcoind

## You need to have gedit installed in order to auto create virtualcoin.conf file below.

gedit ~/.virtualcoin/virtualcoin.conf
testnet=0
listen=1
server=1
daemon=1
gen=1
genproclimit=1
rpcuser=vcoinrpc
rpcpassword=myrandompassword
maxconnections=100
rcpallowip=127.0.0.1
port=443
rpcport=10000

Final:
sudo ./virtualcoind -port=443 -reindex

v.coinz

hero member

Activity: 882

Merit: 515

Windows Wallet updated, please download the new updated wallet.

v.coinz

hero member

Activity: 882

Merit: 515

Block Explorer Upgraded

TheMiningPool.mine

sr. member

Activity: 644

Merit: 250

ok, found the issue.

Updated the checkpoint hash. Does not impact any coins etc.

Please rebuild your linux wallet.

Will release new Windows wallet in few hrs.
Both DNS seeds & SuperNode will also be updated shortly.

Dev

Ok ty.
I was getting mad !! :p

v.coinz

hero member

Activity: 882

Merit: 515

ok, found the issue.

Updated the checkpoint hash. Does not impact any coins etc.

Please rebuild your linux wallet.

Will release new Windows wallet in few hrs.
Both DNS seeds & SuperNode will also be updated shortly.

Dev

v.coinz

hero member

Activity: 882

Merit: 515

Block Explorer:

{
"version" : 16010200,
"protocolversion" : 70030,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 21252,
"timeoffset" : 0,
"connections" : 15,
"proxy" : "",
"difficulty" : 134.84242760,
"testnet" : false,
"keypoololdest" : 1489570951,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""
}

DNS Seed:

{
"version" : 16010200,
"protocolversion" : 70030,
"walletversion" : 60000,
"balance" : 0.00000000,
"blocks" : 21252,
"timeoffset" : 0,
"connections" : 17,
"proxy" : "",
"difficulty" : 134.84242760,
"testnet" : false,
"keypoololdest" : 1487130575,
"keypoolsize" : 101,
"paytxfee" : 0.00000000,
"mininput" : 0.00001000,
"errors" : ""
}

TheMiningPool.mine

sr. member

Activity: 644

Merit: 250

Quote from: gregofdoom on April 21, 2017, 05:08:03 PM

Still not working. Please fix it.

Trying too :/
But something is wrong.
Cannot get synced past block 20777

I'll let you know if I can fix it ...
Sry.

gregofdoom

legendary

Activity: 1834

Merit: 1006

Still not working. Please fix it.

TheMiningPool.mine

sr. member

Activity: 644

Merit: 250

Quote from: gregofdoom on April 21, 2017, 04:51:23 PM

Pool working? I can not connect to any port.

stratum+tcp://miningpool.thruhere.net
:7500
:7510
:7520

Should work fine now but...
Can get only 1 active connection...

"version" : 16010200,
   "protocolversion" : 70030,
   "walletversion" : 60000,
   "balance" : 0.00000000,
   "blocks" : 20777,
   "timeoffset" : 0,
   "connections" : 1,
   "proxy" : "",
   "difficulty" : 352.56824630,
   "testnet" : false,
   "keypoololdest" : 1492804087,
   "keypoolsize" : 101,
   "paytxfee" : 0.00000000,
   "mininput" : 0.00001000,
   "errors" : ""

And something is wrong.
block explorer is at block 21239.
But after reindex with masternode it get stucked at block 20777

gregofdoom

legendary

Activity: 1834

Merit: 1006

Pool working? I can not connect to any port.

stratum+tcp://miningpool.thruhere.net
:7500
:7510
:7520

v.coinz

hero member

Activity: 882

Merit: 515

Quote from: pushkarmore on April 21, 2017, 01:08:42 AM

Quote from: pushkarmore on April 21, 2017, 12:37:17 AM

Quote from: pushkarmore on April 21, 2017, 12:14:51 AM

Quote from: pushkarmore on April 20, 2017, 10:59:50 PM

Run installer of 15.1.4 & then replace exe with the new version.

Always make backup of your wallet.dat file. just copy it somewhere safe just in case.

okay.. i only replaced the qt exe file in appdata with this new 20MB file that I downloaded.
havent run the installer. but when I opened this new file, all looks fine.. :-)

how do i know, its done correctly?

1. Backup your wallet.dat file which has coins.
2. Run 15.1.4 Installer
3. Replace exe file with new file.
4. Launch
5. (optional) if you do not see your coins, close wallet & copy your backup wallet.dat to appdata folder.

Should be straight forward.

got it.. seems alright,.. all coins in place..

OKAY heres an issue that I see now..

Address:
VKxy6HuABSU6MxRtwcAYUDWSmTTbUCXFSN

Explorer:
Total Sent (VC) Total Received (VC) Balance (VC)
2431.32986048 7608.17101240 5176.84115192

Wallet:
Balance (VC): 5392.62845758

Why is a difference of 215 VC? These numbers should tally right?

the last transaction at both wallet and explorer are both the same. no problem there. just the balances are incorrect.

It is expected as Maturity change from 2000 to 20.

Did you solo mine in the last 1-2 weeks?

I will investigate further as well.

No solo mining.. only with theminingpool

I have PM. But meanwhile here is another way to confirm your balance.

In Wallet
Settings -> Option -> Experts Only (enable it)

Send -> "Inputs..."
you will get screen like one below.
Select "List mode"

Your balance should be sum of all those
if you click on "(un)select all"
You will see your total, it should match your balance on your main window.

Now right click on each VC address & copy the address.
Paste in the block explorer & confirm balance.

if any does not match, post that VC address with balance you see in your wallet screen.

v.coinz

hero member

Activity: 882

Merit: 515

Guys, I would suggest that you do not create new transaction next 2-3 days till most users have updated their wallets.

Why?
cause now when you mine a new coin, it will mature in under 2 hours. However old wallets wait 1-2 weeks. Those wallets will not be able to confirm the tx.

* Solo mining is ok
* Pool mining is ok IF the pool is running on new code.
* Existing coins will not be lost (tested & confirmed)

DO NOT SEND/SPEND any coins for next 2-3 days.

pushkarmore

full member

Activity: 241

Merit: 100

Quote from: pushkarmore on April 21, 2017, 12:37:17 AM

Quote from: pushkarmore on April 21, 2017, 12:14:51 AM

Quote from: pushkarmore on April 20, 2017, 10:59:50 PM

Quote from: pushkarmore on April 21, 2017, 12:37:17 AM

Run installer of 15.1.4 & then replace exe with the new version.

Always make backup of your wallet.dat file. just copy it somewhere safe just in case.

okay.. i only replaced the qt exe file in appdata with this new 20MB file that I downloaded.
havent run the installer. but when I opened this new file, all looks fine.. :-)

how do i know, its done correctly?

1. Backup your wallet.dat file which has coins.
2. Run 15.1.4 Installer
3. Replace exe file with new file.
4. Launch
5. (optional) if you do not see your coins, close wallet & copy your backup wallet.dat to appdata folder.

Should be straight forward.

got it.. seems alright,.. all coins in place..

OKAY heres an issue that I see now..

Address:
VKxy6HuABSU6MxRtwcAYUDWSmTTbUCXFSN

Explorer:
Total Sent (VC) Total Received (VC) Balance (VC)
2431.32986048 7608.17101240 5176.84115192

Wallet:
Balance (VC): 5392.62845758

Why is a difference of 215 VC? These numbers should tally right?

the last transaction at both wallet and explorer are both the same. no problem there. just the balances are incorrect.

It is expected as Maturity change from 2000 to 20.

Did you solo mine in the last 1-2 weeks?

I will investigate further as well.

No solo mining.. only with theminingpool

v.coinz

hero member

Activity: 882

Merit: 515

Quote from: pushkarmore on April 21, 2017, 12:14:51 AM

Quote from: pushkarmore on April 20, 2017, 10:59:50 PM