C:\miner\bfgminer321\bfgminer.exe -o pool -u worker1 -p password1 -L log.txt -G -S erupter:all
Fixed.
Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 119. (Read 1193219 times)
September 23, 2013, 04:50:28 AM
C:\miner\bfgminer321\bfgminer.exe -o pool -u worker1 -p password1 -L log.txt -G -S erupter:all
Fixed.
September 23, 2013, 04:11:22 AM
at last got 10 out of 12 erupters running..... few errors among the 10 2 to 13% but 100% on the two little buggers. cant be power issues cause the majority running of the pc psu and it's pulling 10.7A.
how difficult is it going the winUSB route?
how difficult is it going the winUSB route?
Personally, I found that a real pain in the ass, and you would have to use cgminer as BFG will stop recognising the BE.
September 23, 2013, 03:58:58 AM
at last got 10 out of 12 erupters running..... few errors among the 10 2 to 13% but 100% on the two little buggers. cant be power issues cause the majority running of the pc psu and it's pulling 10.7A.
how difficult is it going the winUSB route?
how difficult is it going the winUSB route?
September 23, 2013, 03:53:59 AM
Would someone mind helping me make a .bat file? I'm not familiar with the basics of that...
Currently I have to change directories manually...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
Currently I have to change directories manually...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
Assuming you have the bfgminer dir on your desktop\bfgminer
Code:
@echo off
Echo ---------------
Cd C:\users\%username%\desktop\bfgminer
Bfgminer.exe [options]
Echo --------------------
Echo ---------------
Cd C:\users\%username%\desktop\bfgminer
Bfgminer.exe [options]
Echo --------------------
goto where your miner is copied, my case c:\miner\bfg321
right click in there and make a new text document. double click on it to edit and as below copy the line in and adjust to where your miner is copied too. once done exit and save. rename file to file.bat notice the icon should change. right click on newly made file and select send to desktop as short cut.
C:\miner\bfgminer321\bfgminer.exe -o pool -u worker1 -p password1 -Q 10 --net-delay -L log.txt -G -S all --icarus-options 115200:1:1 --icarus-timing 3.0=100
in my case i made its own little folder cause of different versions of miners.
Hope this helps , if you still have batch file problems lemme know.
September 23, 2013, 12:30:17 AM
Right click the upper left corner click defaults and change settings. Save close window
Restart. Should be in effect now min width and buffer I recommend is 81 characters
cheers
Restart. Should be in effect now min width and buffer I recommend is 81 characters
cheersThanks man. Can you post an image of your qr code? I wanna send you a tip. Can't seem to log into my blockchain right now, but my phone works.
September 22, 2013, 04:25:16 PM
Right click the upper left corner click defaults and change settings. Save close window
Restart. Should be in effect now min width and buffer I recommend is 81 characters
cheers
Restart. Should be in effect now min width and buffer I recommend is 81 characters
cheers September 22, 2013, 03:28:16 PM
Would someone mind helping me make a .bat file? I'm not familiar with the basics of that...
Currently I have to change directories manually...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
Currently I have to change directories manually...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
Assuming you have the bfgminer dir on your desktop\bfgminer
Code:
@echo off
Echo ---------------
Cd C:\users\%username%\desktop\bfgminer
Bfgminer.exe [options]
Echo --------------------
Echo ---------------
Cd C:\users\%username%\desktop\bfgminer
Bfgminer.exe [options]
Echo --------------------
Thanks.
Is there a way to have the window a certain size in the batch file? I always manually stretch out the window after typing cmd but it appears the window can't be changed after running.
September 22, 2013, 03:07:32 PM
Would someone mind helping me make a .bat file? I'm not familiar with the basics of that...
Currently I have to change directories manually...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
Currently I have to change directories manually...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
Assuming you have the bfgminer dir on your desktop\bfgminer
Code:
@echo off
Echo ---------------
Cd C:\users\%username%\desktop\bfgminer
Bfgminer.exe [options]
Echo --------------------
Echo ---------------
Cd C:\users\%username%\desktop\bfgminer
Bfgminer.exe [options]
Echo --------------------
September 22, 2013, 02:56:15 PM
I will send tips if someone wouldn't mind helping me make a .bat file? I'm not familiar with the basics of that...
Currently I have to change directories manually after running cmd (windows)...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
Currently I have to change directories manually after running cmd (windows)...
...then paste this in...
bfgminer -G -o http://pool1 -u user_worker -p 123 -o http://pool2 -u user_worker -p 123
September 22, 2013, 11:36:37 AM
Anyone care to donate a thumb and a board to Luke-Jr so we can get BFGMiner support too at some point?
I will send boards to Luke Jr once we have them made. I love it when a plan comes together.
September 22, 2013, 11:32:19 AM
Anyone care to donate a thumb and a board to Luke-Jr so we can get BFGMiner support too at some point?
I will send boards to Luke Jr once we have them made. Woooooo!!!!
September 22, 2013, 10:52:31 AM
Anyone care to donate a thumb and a board to Luke-Jr so we can get BFGMiner support too at some point?
I will send boards to Luke Jr once we have them made. September 22, 2013, 10:33:58 AM
I know you're busy with the BitFury code, Luke-Jr, but any ETA on the stratum proxy support on BFGMiner? I'd love to run my rig off an OpenWRT box, save running a PC in the house all the time...or even the http getwork server for OpenWRT. 
I want to get every little bit of use out of that little TP-Link.
I want to get every little bit of use out of that little TP-Link.
September 22, 2013, 10:10:40 AM
i keep getting HW errors 100% on some of the usb erruptors. when i test them on another pc they test fine. i tried uninstalling(delete driver) a reinstalling(reinstall driver)
Could be a power problem. erupters need steady clean power at 500mA each. overloading the power source will induce more errors as the available current falls.
Also I have noticed less errors if the PC is not used for other activities.
i connected a cable to my pc 5V rail. a odin gt 800W i can monitor the amps per channel..........
ed. also getting strtum from pool 0 requesting work update.....and it sticks there
September 22, 2013, 10:03:03 AM
i keep getting HW errors 100% on some of the usb erruptors. when i test them on another pc they test fine. i tried uninstalling(delete driver) a reinstalling(reinstall driver)
Could be a power problem. erupters need steady clean power at 500mA each. overloading the power source will induce more errors as the available current falls.
Also I have noticed less errors if the PC is not used for other activities.
September 22, 2013, 10:02:50 AM
i keep getting HW errors 100% on some of the usb erruptors. when i test them on another pc they test fine. i tried uninstalling(delete driver) a reinstalling(reinstall driver)
Almost always power issues.
September 22, 2013, 09:50:59 AM
i keep getting HW errors 100% on some of the usb erruptors. when i test them on another pc they test fine. i tried uninstalling(delete driver) a reinstalling(reinstall driver)
September 22, 2013, 08:11:05 AM
Code:
Failed to init bfd from (C:\bfgminer321\pdcurses.dll)
0x66e43b50 : C:\bfgminer321\pdcurses.dll : wclrtoeol
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x763fa442 : C:\Windows\syswow64\msvcrt.dll : unlock
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x7640a490 : C:\Windows\syswow64\msvcrt.dll : getenv
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x7640a462 : C:\Windows\syswow64\msvcrt.dll : getenv
Failed to init bfd from (C:\bfgminer321\pdcurses.dll)
0x66e41408 : C:\bfgminer321\pdcurses.dll : waddch
0x66e43b50 : C:\bfgminer321\pdcurses.dll : wclrtoeol
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x763fa442 : C:\Windows\syswow64\msvcrt.dll : unlock
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x7640a490 : C:\Windows\syswow64\msvcrt.dll : getenv
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x7640a462 : C:\Windows\syswow64\msvcrt.dll : getenv
Failed to init bfd from (C:\bfgminer321\pdcurses.dll)
0x66e41408 : C:\bfgminer321\pdcurses.dll : waddch
Can you guys try out this special recompiled EXE?
It has some stack protector stuff added, so hopefully will crash with more useful info...
You might also need libssp-0.dll
Hi, Tried the file you suggested and the software no longer see's the blades just starts mining on the CPU then crashes out,
Log:
Code:
[2013-09-22 14:08:31] Invalid config option --temp-cutoff: Invalid parameters for set temp cutoff
[2013-09-22 14:08:31] Invalid config option --temp-target: Invalid parameters for set temp target
[2013-09-22 14:08:31] Started bfgminer 3.2.1
[2013-09-22 14:08:31] Loaded configuration file bfgminer.conf
[2013-09-22 14:08:31] Error in configuration file, partially loaded.
[2013-09-22 14:08:31] Start BFGMiner with -T to see what failed to load.
[2013-09-22 14:08:31] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[2013-09-22 14:08:31] CL Platform 0 name: AMD Accelerated Parallel Processing
[2013-09-22 14:08:31] CL Platform 0 version: OpenCL 1.2 AMD-APP (1124.2)
[2013-09-22 14:08:31] Error -1: Getting Device IDs (num)
[2013-09-22 14:08:31] clDevicesNum returned error, no GPUs usable
[2013-09-22 14:08:31] Probing for an alive pool
[2013-09-22 14:08:31] Testing pool http://stratum.bitcoin.cz:3333
[2013-09-22 14:08:31] HTTP request failed: Empty reply from server
[2013-09-22 14:08:31] HTTP request failed: Empty reply from server
[2013-09-22 14:08:31] Stratum authorisation success for pool 0
[2013-09-22 14:08:31] Pool 0 http://stratum.bitcoin.cz:3333 alive
[2013-09-22 14:08:31] Unknown stratum msg: {"error": [-3, "Method 'get_transactions' not found for service 'mining'", null], "id": "txlistdc30", "result": null}
[2013-09-22 14:08:31] Network difficulty changed to 113M (806.2Th/s)
[2013-09-22 14:08:31] New block: ...fde450d5 #259412 diff 113M (806.2Th/s)
[2013-09-22 14:08:31] Stratum from pool 0 detected new block
[2013-09-22 14:08:31] Pool 0 is hiding block contents from us
[2013-09-22 14:08:32] 0 gpu miner threads started
[2013-09-22 14:08:32] benchmarking all sha256 algorithms ...
[2013-09-22 14:08:32] "c" : benchmarking algorithm ...
[2013-09-22 14:08:32] 2 cpu miner threads started, using SHA256 'fastauto' algorithm.
[2013-09-22 14:08:32] HTTP server listening on port 8330
[2013-09-22 14:08:32] "c" : algorithm runs at 0.10682 MH/s
[2013-09-22 14:08:32] "4way" : benchmarking algorithm ...
[2013-09-22 14:08:32] "4way" : algorithm runs at 0.14021 MH/s
[2013-09-22 14:08:32] "via" : benchmarking algorithm ...
[2013-09-22 14:08:33] "via" : algorithm fails on this platform
[2013-09-22 14:08:33] "cryptopp" : benchmarking algorithm ...
[2013-09-22 14:08:33] "cryptopp" : algorithm runs at 0.14968 MH/s
[2013-09-22 14:08:33] "cryptopp_asm32" : benchmarking algorithm ...
[2013-09-22 14:08:33] "cryptopp_asm32" : algorithm runs at 0.96255 MH/s
[2013-09-22 14:08:33] "sse2_32" : benchmarking algorithm ...
[2013-09-22 14:08:33] "sse2_32" : algorithm runs at 2.76344 MH/s
[2013-09-22 14:08:33] "sse2_32" : is fastest algorithm at 2.76344 MH/s
[2013-09-22 14:08:34] Staged work underrun; increasing queue minimum to 2
Failed to init bfd from (C:\bfgminer321\pdcurses.dll)
0x66e43b50 : C:\bfgminer321\pdcurses.dll : wclrtoeol
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x763fa442 : C:\Windows\syswow64\msvcrt.dll : unlock
Failed to init bfd from (C:\bfgminer321\pdcurses.dll)
0x66e41408 : C:\bfgminer321\pdcurses.dll : waddch
0x4cf1ad : C:\bfgminer321\bfgminer.exe : sha256_xmm.asm
[2013-09-22 14:08:31] Invalid config option --temp-target: Invalid parameters for set temp target
[2013-09-22 14:08:31] Started bfgminer 3.2.1
[2013-09-22 14:08:31] Loaded configuration file bfgminer.conf
[2013-09-22 14:08:31] Error in configuration file, partially loaded.
[2013-09-22 14:08:31] Start BFGMiner with -T to see what failed to load.
[2013-09-22 14:08:31] CL Platform 0 vendor: Advanced Micro Devices, Inc.
[2013-09-22 14:08:31] CL Platform 0 name: AMD Accelerated Parallel Processing
[2013-09-22 14:08:31] CL Platform 0 version: OpenCL 1.2 AMD-APP (1124.2)
[2013-09-22 14:08:31] Error -1: Getting Device IDs (num)
[2013-09-22 14:08:31] clDevicesNum returned error, no GPUs usable
[2013-09-22 14:08:31] Probing for an alive pool
[2013-09-22 14:08:31] Testing pool http://stratum.bitcoin.cz:3333
[2013-09-22 14:08:31] HTTP request failed: Empty reply from server
[2013-09-22 14:08:31] HTTP request failed: Empty reply from server
[2013-09-22 14:08:31] Stratum authorisation success for pool 0
[2013-09-22 14:08:31] Pool 0 http://stratum.bitcoin.cz:3333 alive
[2013-09-22 14:08:31] Unknown stratum msg: {"error": [-3, "Method 'get_transactions' not found for service 'mining'", null], "id": "txlistdc30", "result": null}
[2013-09-22 14:08:31] Network difficulty changed to 113M (806.2Th/s)
[2013-09-22 14:08:31] New block: ...fde450d5 #259412 diff 113M (806.2Th/s)
[2013-09-22 14:08:31] Stratum from pool 0 detected new block
[2013-09-22 14:08:31] Pool 0 is hiding block contents from us
[2013-09-22 14:08:32] 0 gpu miner threads started
[2013-09-22 14:08:32] benchmarking all sha256 algorithms ...
[2013-09-22 14:08:32] "c" : benchmarking algorithm ...
[2013-09-22 14:08:32] 2 cpu miner threads started, using SHA256 'fastauto' algorithm.
[2013-09-22 14:08:32] HTTP server listening on port 8330
[2013-09-22 14:08:32] "c" : algorithm runs at 0.10682 MH/s
[2013-09-22 14:08:32] "4way" : benchmarking algorithm ...
[2013-09-22 14:08:32] "4way" : algorithm runs at 0.14021 MH/s
[2013-09-22 14:08:32] "via" : benchmarking algorithm ...
[2013-09-22 14:08:33] "via" : algorithm fails on this platform
[2013-09-22 14:08:33] "cryptopp" : benchmarking algorithm ...
[2013-09-22 14:08:33] "cryptopp" : algorithm runs at 0.14968 MH/s
[2013-09-22 14:08:33] "cryptopp_asm32" : benchmarking algorithm ...
[2013-09-22 14:08:33] "cryptopp_asm32" : algorithm runs at 0.96255 MH/s
[2013-09-22 14:08:33] "sse2_32" : benchmarking algorithm ...
[2013-09-22 14:08:33] "sse2_32" : algorithm runs at 2.76344 MH/s
[2013-09-22 14:08:33] "sse2_32" : is fastest algorithm at 2.76344 MH/s
[2013-09-22 14:08:34] Staged work underrun; increasing queue minimum to 2
Failed to init bfd from (C:\bfgminer321\pdcurses.dll)
0x66e43b50 : C:\bfgminer321\pdcurses.dll : wclrtoeol
Failed to init bfd from (C:\Windows\syswow64\msvcrt.dll)
0x763fa442 : C:\Windows\syswow64\msvcrt.dll : unlock
Failed to init bfd from (C:\bfgminer321\pdcurses.dll)
0x66e41408 : C:\bfgminer321\pdcurses.dll : waddch
0x4cf1ad : C:\bfgminer321\bfgminer.exe : sha256_xmm.asm
September 22, 2013, 04:25:23 AM
3.1.4 doesn't have the HTTP server in it, which the the problem. 
sorry my bad September 22, 2013, 04:10:54 AM
3.1.4 doesn't have the HTTP server in it, which the the problem.
Jump to: