i got 1400 HW errors in 7 hours of mining, is that ok ?
Seems high, but I don't know your setup or how your binary of BFGMiner was built. 
Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 159. (Read 1193422 times)
May 03, 2013, 08:13:21 PM
May 03, 2013, 07:07:33 PM
Thanks for adding the Raring ppa! I got it downloaded once I got libudev0 installed. In case anyone else runs into it(libudev0 is missing in ubuntu 13.04), download from the web, install it(right click and add to software center), then you can install bfgminer(also from the software center!)
My next question is: Do I need to install the intel SDK again for opencl or is it handled in the ppa?
My next question is: Do I need to install the intel SDK again for opencl or is it handled in the ppa?
May 03, 2013, 05:51:05 PM
i get tons of HW on my 5 ztex boards 
New with version 3.0.2? What version did you not have them with?ZTEX (and most FPGAs) are designed to have some amount of hw errors (usually 1-2%, at difficulty 1) in normal operation.
i got 1400 HW errors in 7 hours of mining, is that ok ?
May 03, 2013, 11:32:42 AM
n_p....your trying to cpu mine litecoin......
Baby steps.
First I get cpu mining working, then I get gpu mining working with my (non-opitmal) nvidia card, then I get better equipment.I was pretty sure default build for bfgminer has no cpu mining support, you'd have to recompile it....could be wrong, but cpu mining isnt done much these days
It is enabled by default in Gentoo.
Code:
$ grep IUSE /usr/portage/local/layman/bitcoin/net-misc/bfgminer/bfgminer-3.0.1.ebuild
IUSE="+adl altivec avalon bitforce +cpumining examples hardened icarus modminer ncurses +opencl padlock scrypt sse2 sse2_4way sse4 +udev x6500 ztex"
IUSE="+adl altivec avalon bitforce +cpumining examples hardened icarus modminer ncurses +opencl padlock scrypt sse2 sse2_4way sse4 +udev x6500 ztex"
May 03, 2013, 10:58:54 AM
I was pretty sure default build for bfgminer has no cpu mining support, you'd have to recompile it....could be wrong, but cpu mining isnt done much these days
Yes, that's correct; cpumining is disabled by default. You'd have to pass --enable-cpumining to ./configure before make`ing your own build. 
May 03, 2013, 10:06:14 AM
n_p....your trying to cpu mine litecoin......
I was pretty sure default build for bfgminer has no cpu mining support, you'd have to recompile it....could be wrong, but cpu mining isnt done much these days
I was pretty sure default build for bfgminer has no cpu mining support, you'd have to recompile it....could be wrong, but cpu mining isnt done much these days
May 03, 2013, 09:49:59 AM
Sorry, I don't understand what is going on (I just escaped from the newbies section), but I know this is not good (all of my shares are getting rejected):
This is my first attempt at mining, and I can see I am not going to do well at this rate. Do you have any idea what is happening? Thank you in advance for your help.
Might as well add this here (a slightly different error):
Code:
bfgminer version 3.0.1 - Started: [2013-05-03 10:19:36] - [ 0 days 04:25:52]
--------------------------------------------------------------------------------
5s: 2.2 avg: 2.9 u: 0.0 Mh/s | A:0 R:14 S:0 HW:0 U:0.0/m BS:0
ST: 2 DW: 4 GW: 175 LW: 2392 GF: 0 NB: 69 AS: 0 RF: 0 E: 0.00
Connected to pooledbits.com diff 0 with LP as user user.1
Block: ...5bdede478b1c4f27 Diff:482 (3.454Gh/s) Started: [14:39:58]
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
CPU 0: | 1.7/ 1.7/ 0.0Mh/s | A:0 R:8 HW:0 U:0.00/m
CPU 1: | 438.0/354.2/ 0.0kh/s | A:0 R:2 HW:0 U:0.00/m
CPU 2: | 462.1/464.8/ 0.0kh/s | A:0 R:1 HW:0 U:0.00/m
CPU 3: | 379.9/357.0/ 0.0kh/s | A:0 R:3 HW:0 U:0.00/m
--------------------------------------------------------------------------------
[...]
[2013-05-03 14:48:44] 5s: 3.1 avg: 2.9 u: 0.0 Mh/s | A:0 R:14 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:48:46] Rejected 6498e19d CPU 0 Diff 0/0 (target-miss)
[2013-05-03 14:48:46] CPU0 | 5s: 1.8 avg: 1.7 u: 0.0 Mh/s | A:0 R:9 HW:0 U:0.0/m
[2013-05-03 14:48:49] 5s: 1.9 avg: 2.9 u: 0.0 Mh/s | A:0 R:15 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:48:54] 5s: 3.4 avg: 2.9 u: 0.0 Mh/s | A:0 R:15 S:0 HW:0 U:0.0/m BS:0
--------------------------------------------------------------------------------
5s: 2.2 avg: 2.9 u: 0.0 Mh/s | A:0 R:14 S:0 HW:0 U:0.0/m BS:0
ST: 2 DW: 4 GW: 175 LW: 2392 GF: 0 NB: 69 AS: 0 RF: 0 E: 0.00
Connected to pooledbits.com diff 0 with LP as user user.1
Block: ...5bdede478b1c4f27 Diff:482 (3.454Gh/s) Started: [14:39:58]
--------------------------------------------------------------------------------
[P]ool management [S]ettings [D]isplay options [Q]uit
CPU 0: | 1.7/ 1.7/ 0.0Mh/s | A:0 R:8 HW:0 U:0.00/m
CPU 1: | 438.0/354.2/ 0.0kh/s | A:0 R:2 HW:0 U:0.00/m
CPU 2: | 462.1/464.8/ 0.0kh/s | A:0 R:1 HW:0 U:0.00/m
CPU 3: | 379.9/357.0/ 0.0kh/s | A:0 R:3 HW:0 U:0.00/m
--------------------------------------------------------------------------------
[...]
[2013-05-03 14:48:44] 5s: 3.1 avg: 2.9 u: 0.0 Mh/s | A:0 R:14 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:48:46] Rejected 6498e19d CPU 0 Diff 0/0 (target-miss)
[2013-05-03 14:48:46] CPU0 | 5s: 1.8 avg: 1.7 u: 0.0 Mh/s | A:0 R:9 HW:0 U:0.0/m
[2013-05-03 14:48:49] 5s: 1.9 avg: 2.9 u: 0.0 Mh/s | A:0 R:15 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:48:54] 5s: 3.4 avg: 2.9 u: 0.0 Mh/s | A:0 R:15 S:0 HW:0 U:0.0/m BS:0
This is my first attempt at mining, and I can see I am not going to do well at this rate.
Do you have any idea what is happening? Thank you in advance for your help.Might as well add this here (a slightly different error):
Code:
[2013-05-03 14:55:22] 5s: 1.2 avg: 2.9 u: 0.0 Mh/s | A:0 R:15 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:55:27] 5s: 1.2 avg: 2.9 u: 0.0 Mh/s | A:0 R:15 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:55:28] Pool 0 stale share detected, submitting as user requested
[2013-05-03 14:55:29] Rejected da09edad CPU 0 Diff 0/0 (unknown-work)
[2013-05-03 14:55:29] CPU0 | 5s: 1.7 avg: 1.7 u: 0.0 Mh/s | A:0 R:10 HW:0 U:0.0/m
[2013-05-03 14:55:33] 5s: 1.3 avg: 2.9 u: 0.0 Mh/s | A:0 R:16 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:55:39] 5s: 1.4 avg: 2.9 u: 0.0 Mh/s | A:0 R:16 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:55:27] 5s: 1.2 avg: 2.9 u: 0.0 Mh/s | A:0 R:15 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:55:28] Pool 0 stale share detected, submitting as user requested
[2013-05-03 14:55:29] Rejected da09edad CPU 0 Diff 0/0 (unknown-work)
[2013-05-03 14:55:29] CPU0 | 5s: 1.7 avg: 1.7 u: 0.0 Mh/s | A:0 R:10 HW:0 U:0.0/m
[2013-05-03 14:55:33] 5s: 1.3 avg: 2.9 u: 0.0 Mh/s | A:0 R:16 S:0 HW:0 U:0.0/m BS:0
[2013-05-03 14:55:39] 5s: 1.4 avg: 2.9 u: 0.0 Mh/s | A:0 R:16 S:0 HW:0 U:0.0/m BS:0
May 02, 2013, 05:56:04 AM
he's getting 600-1500 HW
bfgminer was compiled on his system, in msys shell (I did this for him
)
He's only tried std ztex miner before bfgminer....
tbh, I wasnt worried about the hw figures, considering the boards keep overclocking to 224mhz then back to 212
Think the issue is cos one board is always slightly higher HW, but I have a feeling this is actually bad thermal paste under the fan tbh
bfgminer was compiled on his system, in msys shell (I did this for him
)He's only tried std ztex miner before bfgminer....
tbh, I wasnt worried about the hw figures, considering the boards keep overclocking to 224mhz then back to 212
Think the issue is cos one board is always slightly higher HW, but I have a feeling this is actually bad thermal paste under the fan tbh
May 02, 2013, 05:51:15 AM
i get tons of HW on my 5 ztex boards
New with version 3.0.2? What version did you not have them with?ZTEX (and most FPGAs) are designed to have some amount of hw errors (usually 1-2%, at difficulty 1) in normal operation.
May 02, 2013, 04:05:28 AM
i get tons of HW on my 5 ztex boards
New with version 3.0.2? What version did you not have them with?im running 3.0.2
oh, its first time im testing it out .. so ..
May 01, 2013, 05:24:02 PM
i get tons of HW on my 5 ztex boards
New with version 3.0.2? What version did you not have them with?im running 3.0.2
May 01, 2013, 05:21:37 PM
i get tons of HW on my 5 ztex boards
New with version 3.0.2? What version did you not have them with?im running 3.0.2
May 01, 2013, 04:18:25 PM
i get tons of HW on my 5 ztex boards
New with version 3.0.2? What version did you not have them with? May 01, 2013, 02:30:31 PM
i get tons of HW on my 5 ztex boards
May 01, 2013, 03:59:08 AM
bfgminer crashed if restart.
Version: 3.0.1, 3.0.2
Driver 12.1-13.1, ocl 2.5 (684.213)
Version: 3.0.1, 3.0.2
Driver 12.1-13.1, ocl 2.5 (684.213)
Code:
Problem Event Name: APPCRASH
Application Name: bfgminer.exe
Application Version: 0.0.0.0
Application Timestamp: 517cb77a
Fault Module Name: atiadlxx.dll
Fault Module Version: 6.14.10.1116
Fault Module Timestamp: 5064f9c4
Exception Code: c0000005
Exception Offset: 000000000005875d
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1049
Additional Information 1: 69d0
Additional Information 2: 69d00902915e3de0d2c89bcaa142a9ee
Additional Information 3: a6be
Additional Information 4: a6be99c6aba86497225c7b035ba2faaf
Application Name: bfgminer.exe
Application Version: 0.0.0.0
Application Timestamp: 517cb77a
Fault Module Name: atiadlxx.dll
Fault Module Version: 6.14.10.1116
Fault Module Timestamp: 5064f9c4
Exception Code: c0000005
Exception Offset: 000000000005875d
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 1049
Additional Information 1: 69d0
Additional Information 2: 69d00902915e3de0d2c89bcaa142a9ee
Additional Information 3: a6be
Additional Information 4: a6be99c6aba86497225c7b035ba2faaf
April 30, 2013, 05:59:49 PM
I have no screen on my mac, homebrow seam complex to install, I have 10.6, then I need curl...
Just provide simple package is very more simple for me.
It's not that simple or binaries would already be available. You need the right libraries as well, which is why Homebrew or an installer are necessary. I think, either way, you're going to have a hard time getting it going on 10.6. There's a Mac app and installer in beta here, but it requires 10.8. Just provide simple package is very more simple for me.
April 30, 2013, 05:51:00 PM
I have no screen on my mac, homebrow seam complex to install, I have 10.6, then I need curl...
Just provide simple package is very more simple for me.
Just provide simple package is very more simple for me.
April 30, 2013, 05:16:10 PM
And no build for mac?
Check out my post here for getting bfgminer going on OS X. April 30, 2013, 04:59:14 PM
And no build for mac?
Macs can easily build from the source, assuming you have the developer tools installed. (I don't think they come with gcc etc. installed by default.) April 30, 2013, 04:10:52 PM
And no build for mac?
Jump to: