Pages:
Author

Topic: OLD: BFGMiner 3.10.0: modular ASIC+FPGA, GBT+Strtm, RPC, Mac/Lnx/W64, AntU1, DRB - page 94. (Read 1193364 times)

sr. member
Activity: 588
Merit: 251
I use:

screen -dmS bfg bfgminer

Then whenever I log in,  to connect to the BFG instance, just use:

screen -x bfg



Hope this helps. Smiley


I'm guessing you were unaware of my level of n00b   Cheesy

This string placed into the Terminal window did not work:

sudo screen -dmS bfg bfgminer -o stratum+tcp://stratum.mining.eligius.st:3334 -u
-p -S all


What have I missed in your example?
hero member
Activity: 1246
Merit: 501
OK, got 3.6.0 on.  Had to do it manually, rather than via LuCI.  Roll Eyes

Still showing 100% errors.  

Edit: Did you get around the hidapi thing then?

Luke-Jr, any ideas?  Still no-go here.
legendary
Activity: 1190
Merit: 1000
With version 3.6.0, nanofury more stable & reach 2 Gh/s.



Now waiting for someone to make HIDAPI package for openwrt  Roll Eyes

newbie
Activity: 18
Merit: 0
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.

That did not work either! Any other conflict you can think on that I can try would be greatly appreaciated

Maybe the problem now is that you don't have a conf file, and are not completely specifying the url:port and user/pass for your pool on the command line?

Try installing this .bat file in the same directory as your BFGMiner     https://www.dropbox.com/s/39mcq8pb3zo7gkf/StartMiningExample.bat

Then make a shortcut to the batch from your desktop
 
It starts recongizes my devices than everything goes blank, that's farther than I got on my own.

BFGMiner3.6.0 does take a while longer to start up than earlier versions
I figured it out! it was my firewall that the tech from Comcast who set it on the highest level.
hero member
Activity: 868
Merit: 1000
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.

That did not work either! Any other conflict you can think on that I can try would be greatly appreaciated

Maybe the problem now is that you don't have a conf file, and are not completely specifying the url:port and user/pass for your pool on the command line?

Try installing this .bat file in the same directory as your BFGMiner     https://www.dropbox.com/s/39mcq8pb3zo7gkf/StartMiningExample.bat

Then make a shortcut to the batch from your desktop
 
It starts recongizes my devices than everything goes blank, that's farther than I got on my own.

BFGMiner3.6.0 does take a while longer to start up than earlier versions
newbie
Activity: 18
Merit: 0
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.

That did not work either! Any other conflict you can think on that I can try would be greatly appreaciated

Maybe the problem now is that you don't have a conf file, and are not completely specifying the url:port and user/pass for your pool on the command line?

Try installing this .bat file in the same directory as your BFGMiner     https://www.dropbox.com/s/39mcq8pb3zo7gkf/StartMiningExample.bat

Then make a shortcut to the batch from your desktop
 
It starts recongizes my devices than everything goes blank, that's farther than I got on my own.
hero member
Activity: 868
Merit: 1000
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.

That did not work either! Any other conflict you can think on that I can try would be greatly appreaciated

Maybe the problem now is that you don't have a conf file, and are not completely specifying the url:port and user/pass for your pool on the command line?

Try installing this .bat file in the same directory as your BFGMiner     https://www.dropbox.com/s/39mcq8pb3zo7gkf/StartMiningExample.bat

Then make a shortcut to the batch from your desktop
legendary
Activity: 2576
Merit: 1186
legendary
Activity: 1066
Merit: 1098
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.

That did not work either! Any other conflict you can think on that I can try would be greatly appreaciated

Maybe the problem now is that you don't have a conf file, and are not completely specifying the url:port and user/pass for your pool on the command line?
hero member
Activity: 1246
Merit: 501
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.

That did not work either! Any other conflict you can think on that I can try would be greatly appreaciated

I all out of ideas, sorry.
newbie
Activity: 18
Merit: 0
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.

That did not work either! Any other conflict you can think on that I can try would be greatly appreaciated
hero member
Activity: 1246
Merit: 501
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 

Where is bfgminer?  If it's somewhere in your user folder, it may be a permissions issue.

Copy the bfgminer folder to the root of c: and see if that helps.
newbie
Activity: 18
Merit: 0
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf

I removed it yesterday, deleted everything on this computer and restalled everything about 2 hours ago and it still doing the same thing.  I did everything that I could think of also read through most of the thread bitcointalk. 
sr. member
Activity: 364
Merit: 250
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...

me too...   back up and remove that .conf
hero member
Activity: 1246
Merit: 501
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.

Have you tried clearing out your .conf file?  Any time BFG craps out like that on me, it's something broken in the bfgminer.conf...
newbie
Activity: 18
Merit: 0
what should I check next?

How to upgrade to a recent version?

Good one Helldiver
But I just when back to 3.1.4 because that was the only one that worked I have 3.5.1 installed  Now they all just hang when I start them.
hero member
Activity: 1246
Merit: 501
OK, got 3.6.0 on.  Had to do it manually, rather than via LuCI.  Roll Eyes

Still showing 100% errors.  

Edit: Did you get around the hidapi thing then?
legendary
Activity: 2576
Merit: 1186
Edit: 3.5.2 is showing as the latest on OpenWRT...
I forgot to update the OpenWrt README... For 3.6, you'll need to change "testing" to "latest"

We now have 3 stages: stable, testing, and latest.

Stable (currently 3.0.x) is "no outstanding regressions from previous release, and probably any bugs found will also affect previous versions too".
Testing (currently 3.5.x) is "only applying bugfixes to make this the next stable"
Latest (currently 3.6.x) is "new code in the works; lolmaybeithascrashing"

That said, 3.5.2 should have had the bigpic fixes too... :/

Set source manually to src/gz bfgminer http://luke.dashjr.org/programs/bitcoin/files/bfgminer/3.6.0/openwrt/12.09/ar71xx - it's still showing 3.5.2 as latest...
Did you opkg update?
hero member
Activity: 1246
Merit: 501
Initial testing on 3.5.2 on OpenWRT is still showing 100% errors. Sad

Set source manually to src/gz bfgminer http://luke.dashjr.org/programs/bitcoin/files/bfgminer/3.6.0/openwrt/12.09/ar71xx - it's still showing 3.5.2 as latest...
hero member
Activity: 1246
Merit: 501

Due to OpenWRT not supporting the BlueFuzzies, I'm moving over to RPi - really don't want to be running a PC just to run a pair of Blues...
The endian issues with the BigPictureMining driver should be fixed in 3.5.2+ - do you still have problems on OpenWrt?

I didn't try it with 3.6.0 - I'll try it later and see how it goes.

Edit: 3.5.2 is showing as the latest on OpenWRT...
Pages:
Jump to: